Contact Us

TPS62871QWRXSRQ1

Brand: Texas Instruments
Texas Instruments TPS62871QWRXSRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS62871QWRXSRQ1 — Power Management & Signal Chain | Superb Automation

TPS62871QWRXSRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS62871QWRXSRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS62871QWRXSRQ1 9 A automotive buck with remote sense

The TPS62871QWRXSRQ1 is the 9 A member of the TPS6287x-Q1 family, a stackable synchronous step down converter for automotive rails that runs from 2.7 V to 6 V and regulates an output from 0.4 V to 1.0375 V in 2.5 mV steps. The family covers 6 A, 9 A, 12 A and 15 A in one body, the parts can be stacked for more current, and the junction range reaches minus 40 to plus 150 degrees. The body is a QFN with wettable flanks, which is the version an automotive assembly line needs for an optical solder joint check.

Two features put this part in a different class from a general purpose converter. The first is remote sense: the regulation loop can be closed on the voltage at the load rather than at the output pin of the converter, which removes the drop across the copper and the connector from the accuracy budget. The second is the I2C interface, which lets a system change the output voltage, read the status and set the start up behaviour without a hardware change. Both are supported on all four current members.

The switching frequency is selectable at 1.5 MHz or 2.25 MHz, with a 10 per cent spread spectrum option for emissions, and the electrical table quotes the 1.5 MHz selection at 1.35 to 1.65 MHz and the 2.25 MHz selection at 2.025 to 2.475 MHz over the full range. Output accuracy is 1 per cent, the power good window sits at 96 to 98 per cent on the way down and 104 to 106 per cent on the way up, and thermal shutdown is at 170 degrees junction.

Key parameters from the SLVSFJ3E document

Input range2.7 V to 6 V, UVLO 2.5 V to 2.6 V rising with 90 mV of hysteresis
Output range0.4 V to 1.0375 V in 2.5 mV steps through the VSEL pins or I2C
Output current9 A on this member, with 6 A, 12 A and 15 A siblings and stacking for more
Switching frequency1.5 MHz or 2.25 MHz selectable, spread spectrum option for emissions
Output accuracy1 per cent, improved by the remote sense connection at the load
Power good96 to 98 per cent on the falling side and 104 to 106 per cent on the rising side
Thermal shutdown170 degrees junction, with a thermal warning flag before the shutdown
Junction rangeMinus 40 to plus 150 degrees
InterfaceI2C with SDA and SCL, plus VSEL, FSEL and MODE pins for hardware settings
Output dischargeActive discharge with a resistive path when the converter is disabled
QualificationAutomotive AEC-Q100 with functional safety documentation available
PackageQFN with wettable flanks for an optical joint check

What remote sense and stacking change for a customer

At 9 A and 0.9 V the current is 10 A per volt of drop, so 10 milliohm of copper between the converter and the load is 90 mV of error, which is 10 per cent of the rail. Remote sense removes that error by closing the loop at the load, and it is the reason a 1 per cent converter can hold a core rail within tolerance on a board where the processor sits 40 mm away. The sense lines have to be routed as a pair and kept away from the switch node, because they carry a signal of millivolts and any noise on them is regulated into the output.

Stacking is the other property that matters at this current class. Two parts can share the load with their switch nodes and inductors separate and their feedback and reference shared, which doubles the current without doubling the ripple per phase and without a single hot component. A board that starts at 9 A and grows to 18 A can keep the same converter, the same inductor and the same control scheme, and add a phase rather than a new platform.

The automotive qualification is not a label. The wettable flank body is there so that an automated optical inspection can see the solder fillet on the side of the package, the junction range reaches 150 degrees because the part sits near an engine or under a dashboard in the sun, and the functional safety documentation exists because a rail that feeds an ADAS processor has to be argued about in a safety case rather than just measured.

Where this part fits

ADAS processor and sensor fusion rails, infotainment and cluster supplies, FPGA and ASIC core rails in a vehicle, DDR memory supplies and any automotive board that needs 9 A at a core voltage. Our cross reference notes are at power management cross reference and the substitution check is at pin to pin cross reference.

What to check before a purchase order

Check the current member and the start up setting in the order code. All four members share the document and the package, and the difference between 6 A and 15 A is a digit in the string, so a reel selected by family name can be a third of the current the board expects. The start up voltage is a separate field in the same code and has to match the rail the board was signed off for.

Check that the reel is the wettable flank body if the assembly line relies on optical inspection. Both bodies exist, both fit the same footprint, and only one gives a visible fillet. The receipt and marking check we run is at incoming inspection plan.

Questions that come up on this part

Can the output be set below 0.4 V, is a common question. It cannot, because the reference and the internal divider stop there, and a core rail below that needs a different device with an external reference. The 2.5 mV step is fine enough that the useful range for a processor core is covered, and the register map makes the change a single write rather than a resistor change.

The second question is whether the part can run from a 5 V bus with a 3.3 V output. It cannot, because the output range stops at 1.0375 V. This family is a core rail converter, and a 3.3 V rail from 5 V is a different family with a different inductor and a different loop. Putting the two functions on one part number is how a bill of materials ends up with a converter that cannot reach the rail it was bought for.