TPS628301ARZER
Product Specifications
TPS628301ARZER
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS628301ARZER from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS628301ARZER 1 A synchronous buck in a 1 mm by 2 mm WQFN
The TPS628301ARZER is the 1 A member of the TPS62830x family, a synchronous step down converter that runs from 2.25 V to 5.5 V and regulates an adjustable output from 0.5 V to 4.5 V. The body is the eight pin RZE WQFN measuring 1 mm by 2 mm, the smaller of the two packages the family offers, and the sibling DRL body is a SOT583 of 1.6 mm by 2.1 mm with the same eight pins. Both packages hold the high side switch, the low side switch, the control loop and the feedback divider node, so the complete converter is one part, one inductor and two capacitors.
The feedback reference is 500 mV with a 495 mV to 505 mV window at 25 degrees, and the vendor quotes 1 per cent output accuracy across the minus 40 to plus 125 degree junction range. The oscillator is a 2.0 MHz quasi fixed frequency, which keeps the inductor in the 0.47 microhenry class and keeps the output ripple low enough for a radio rail without a second filter stage. On resistance at 5 V input is 35 milliohm typical and 57 milliohm maximum for the high side, 18 milliohm typical and 29 milliohm maximum for the low side.
Two details decide whether this part is the right choice on a given board. The first is the quiescent current, 7 nA typical and 17 nA maximum with the device not switching, which is the reason the part exists in battery products that sleep for months. The second is the MODE pin, which selects between power save operation with automatic PWM to PFM transition and a forced PWM behaviour that keeps the ripple spectrum fixed for a receiver or an ADC reference. The shutdown current is 100 nA typical and 700 nA maximum.
Key parameters from the SLVSG98B document
| Input range | 2.25 V to 5.5 V, UVLO rising 2.05 V to 2.25 V with 90 mV to 120 mV of hysteresis |
| Output range | 0.5 V to 4.5 V adjustable through an external divider on the FB pin |
| Output current | 1 A rated on this member, 2 A, 3 A and 4 A on the other three |
| Feedback voltage | 500 mV typical, 495 mV to 505 mV at 25 degrees, 1 per cent over the full junction range |
| Switching frequency | 2.0 MHz quasi fixed in PWM, 100 per cent duty mode available |
| High side resistance | 35 milliohm typical and 57 milliohm maximum at 5 V input |
| Low side resistance | 18 milliohm typical and 29 milliohm maximum at 5 V input |
| Quiescent current | 7 nA typical and 17 nA maximum with the enable high and no load |
| Shutdown current | 100 nA typical and 700 nA maximum with the enable low |
| Soft start | 180 microseconds to 440 microseconds from zero to 95 per cent of the output, 530 to 1300 on the K options |
| Power good | Open drain, 96 per cent rising and 92 per cent falling on undervoltage, 110 per cent and 105 per cent on overvoltage |
| Package | RZE WQFN of 1 mm by 2 mm with eight pins, thermal shutdown at 150 degrees junction |
Why the 1 A member carries the same silicon
All four members of the family share one document, one pinout per package and one control loop, and they differ in the current rating of the switches and in the package they are offered in. That is useful at the purchasing desk: a board that was released at 1 A can be reworked to 2 A or 3 A without changing the copper, provided the inductor and the output capacitor are rechecked against the larger ripple and the larger current limit. The families are pin to pin compatible inside a package, which is the property our sourcing desk uses most often when a customer needs to upgrade a rail without a board spin.
The 1 A part is not simply a de rated 3 A part. Conduction loss at 1 A with a 57 milliohm maximum high side switch and a 40 per cent duty cycle is about 23 milliwatt, and the low side adds about 17 milliwatt, so the converter dissipates well under 100 milliwatt including switching loss and the inductor. That is why the RZE body of 1 mm by 2 mm is enough and why the copper area around it can stay small.
The family also offers an output discharge path and, on one option, a latch off response to a short circuit or an overvoltage event instead of the hiccup behaviour the standard members use. A product that must stay down until a supervisor resets it takes the latch off option, a product that must recover on its own takes the hiccup option. The catalogue entry does not carry that bit of the option code, so it has to be confirmed on the order.
Where this part fits
Battery powered instruments, wearable sensor nodes, portable medical monitors, handheld radios and any board where a 3.3 V or 1.8 V rail has to hold regulation while the battery falls from 4.2 V to 2.5 V with a 1 A load. Our desk keeps the cross reference notes for this family, see power management cross reference and pin to pin cross reference.
What to check before a purchase order
Check the current letter in the order code first. TPS628301 is 1 A, TPS628302 is 2 A, TPS628303 is 3 A and TPS628304 is 4 A, and the four share one document, one marking family and, inside a package, one footprint. A reel picked by family name alone can deliver a 1 A part to a board that was signed off at 2 A, and the failure appears only at full load or at high ambient.
Check the inductor against the current limit rather than against the 1 A rating, and check the output capacitor against the 2 MHz carrier. A part that hiccups on a cold start is usually a part whose inductor saturated above the load current, not a part whose regulator failed. The receipt check on the reel and the marking is in incoming inspection plan.
Questions that come up on this part
What happens below the UVLO threshold is the first question. The converter stops switching between 2.05 V and 2.25 V on a rising input and restarts about 120 mV lower, so a rail that collapses under load will oscillate around that window rather than stay down. A product that must not restart takes a supervisor on the enable pin.
The second question is whether the output can go below 0.5 V. It cannot without an external reference, because the feedback node regulates at 500 mV and the divider only scales up from there. A 0.9 V core rail is inside the range, and the lower the output, the more the 1 per cent feedback window matters, since 1 per cent of 0.9 V is 9 mV while the ripple and the DC drop across the inductor are unchanged.