Contact Us

TPS62420DRCR

Brand: Texas Instruments
Texas Instruments TPS62420DRCR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS62420DRCR — Power Management & Signal Chain | Superb Automation

TPS62420DRCR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS62420DRCR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS62420DRCR: dual 600 mA and 1000 mA step-down converter, 2.25 MHz, VSON-10

TPS62420DRCR is a dual synchronous step-down converter with one 600 mA and one 1000 mA output in a VSON body of 10 pins. Both rails run from a single input of 2.5 V to 6 V, so the part works from one lithium cell, from three nickel cells, or from a 3.3 V or 5 V rail that already exists on the board. The two outputs switch 180 degrees apart, which halves the ripple the input capacitor has to absorb and keeps the peak current out of the supply.

Order code and package

TPS62420DRCRActive, VSON-10, 3000 pieces on a large reel, MSL-2-260C-1 YEAR
TPS62420DRCTActive, the same body, 250 pieces on a small reel
TPS62420DRCRG4Active, Green material declaration, 3000 pieces on a large reel
TPS62421DRCRActive, the EasyScale member of the pair, 3000 pieces on a large reel
Temperature range on every rowminus 40 to 85 degrees, which is narrower than the 125 degree parts around it

Electrical parameters that decide the application

Input voltage2.5 V to 6 V
Output current600 mA on OUT1, 1000 mA on OUT2
Output voltage0.6 V to VIN, adjustable through the feedback divider
Switching frequency2.25 MHz fixed, no external resistor
Quiescent current32 microamp typical for both converters together
Shutdown current1.2 microamp
Output accuracy in PWM modeplus or minus 1 per cent
Duty cycle100 per cent, so the part passes the input through at low dropout

Family variants and how they differ

TPS62420OUT1 is set by the DEF_1 pin, low gives a fixed 1.2 V, high gives the adjustable divider
TPS62421adds the EasyScale one pin serial interface so the output can be moved while the rail is live
MODE/DATA pinpulling it high forces fixed frequency PWM and removes the light load pulse skipping
Phase relationshipthe two outputs run 180 degrees apart
Body3 mm by 3 mm VSON with the thermal pad on the underside

Points to check before this part goes on a BOM

The DEF_1 trick is the first thing to read on this part. On the TPS62420 the first output can be fixed at 1.2 V by pulling DEF_1 low, which removes two resistors and the divider error from the rail that feeds a processor core. The moment a board needs any other voltage on OUT1 the same pin has to go high and the divider has to be fitted, so a bill of material copied from a 1.2 V board will not work on a 1.1 V board without that change.

Power save mode is automatic and it is not free. At light load the converter drops into pulse skipping to hold efficiency near 95 per cent. That is right for a phone in standby. It is wrong for an analogue rail, because the switching ripple at light load is larger and lands straight on a low noise amplifier. Pulling MODE/DATA high forces fixed frequency PWM and trades the light load efficiency for a clean spectrum.

32 microamp is the figure for both converters running. That is the number to quote against a battery life budget, not the per-converter figure. In shutdown the part draws 1.2 microamp, so a rail that is switched off still has to be counted in the sleep budget of a device that sits in a drawer for months.

100 per cent duty cycle sounds like a free pass and it is not. It lets the output follow the input when the cell falls to the output voltage, which buys run time at the end of discharge. It also means the rail is no longer regulated at that point, so anything on OUT1 that expects a clean core voltage has to tolerate the sag.

The 85 degree limit is the trap in this order code. The addendum prints minus 40 to 85 for the DRC body on every row. Neighbouring converters in the same family are rated to 125 degrees, so a board that was qualified on one of those and swapped to this part loses 40 degrees of margin without any change to the net names.

Reel size is a purchasing decision, not a detail. The R suffix is 3000 pieces on a large reel and the T suffix is 250 on a small reel. For a prototype run the small reel avoids breaking a large one, and for volume the large reel is the only sensible option. Both are active rows, so the suffix decides the price per piece more than the part does.

The 180 degree phase shift is what makes a small input capacitor possible. With both outputs switching at the same instant the input ripple current adds, and the capacitor has to be larger and better. Running them apart cancels part of the ripple. If a later board revision moves OUT2 to a different converter and keeps the same capacitor, the ripple on the input rail will be higher than the original intent.

MSL-2 with a one year floor life applies to this body. That matters for a assembly house holding stock: the part can sit on the floor for a year, then needs a bake after 168 hours of exposure. A re-reel from a broker that has been open for months is a moisture risk that does not show on the incoming inspection report.

Two outputs with different current ratings are not interchangeable in a shortage. OUT2 is rated 1000 mA and OUT1 600 mA, and the two loops are set up for different loads. During a shortage it is tempting to take a single output part and feed both rails from it, which changes the phase relationship, the ripple and the sequencing the rest of the board was qualified against. The honest route is a matching dual part from the same family or a second reel of the exact string, and the offer should say which output carries the binding current.

What to confirm before this part goes on a purchase order

The ordering string has to name the output configuration. TPS62420DRCR and TPS62421DRCR share a package and a pinout but differ in whether the EasyScale interface is bonded out, so a substitute across those two strings changes what the firmware can do at run time.

Ask for the date code and the reel label, not only the part number. Two rows of the same string exist, one plain and one with the Green material suffix, and the RoHS declaration the customer files has to match the row that actually ships.

Where this order code fits

It runs two rails on a handheld board fed by one lithium cell: the core rail at 1.2 V and the input output rail at 3.3 V, in phones, organisers, media players and cameras. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

Can both outputs be used at full current at the same time? Yes, 600 mA and 1000 mA are independent ratings. The limit is thermal: the 3 mm body has to dump the losses of both converters, so a board running both at full load in a warm enclosure needs the thermal pad soldered to a real copper area, not to a trace.

Is this part suitable for a 5 V to 3.3 V rail on an industrial board? Electrically yes, the input range covers it. The 85 degree rating is the constraint. An industrial board that has to run at 85 degree ambient needs the junction to stay below 85, which leaves no margin at all once both converters are loaded.

What replaces it if it is short? The same family in the 125 degree body, or a single output converter per rail. Both change the bill of material, so the substitute has to be checked against the divider values and the MODE pin state before it is offered as a drop in.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.