Contact Us

TPS62132RGTR

Brand: Texas Instruments
Texas Instruments TPS62132RGTR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS62132RGTR — Power Management & Signal Chain | Superb Automation

TPS62132RGTR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS62132RGTR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS62132RGTR: 3.3 V fixed 3 A step-down, 3 V to 17 V input, 2.5 MHz, QFN-16

TPS62132RGTR is a 3 A synchronous step down converter with a fixed 3.3 V output, running at about 2.5 MHz so the inductor is small enough for a dense board in a QFN-16 body of 16 pins. The input range is 3 V to 17 V and the output is fixed at 3.3 V on this string, selected by the DEF pin being left at high impedance. The converter uses DCS-Control with a typical switching frequency of 2.5 MHz, a quiescent current of 17 microamp and a power save mode that keeps efficiency up at light load. A power good output and a 100 per cent duty cycle mode complete the feature set.

Order code and package

TPS62132RGTRActive, VQFN (RGT) body, 16 pins, 3 mm by 3 mm, 3000 pieces on a large reel, marking QVY
TPS62132RGTR.AActive, same body and same 3000 piece reel, material row printed separately
TPS62132RGTTActive, the same part with 250 pieces on a small reel
TPS62130the adjustable member with an 800 mV reference, same body and pin out
Temperature rangeminus 40 to 125 degrees junction

Electrical parameters that decide the application

Input voltage3 V to 17 V
Output voltage3.3 V fixed on this string, 0.9 V to 6 V on the adjustable member
Output current3 A maximum
Switching frequencyabout 2.5 MHz typical, selectable between two settings
Quiescent current17 microamp typical in power save mode
Reference800 mV on the adjustable member, 785.6 to 800 mV over temperature
Duty cycle100 per cent mode, which allows the output to follow the input when it falls
Protectionshort circuit protection, over temperature protection and a power good output

Family variants and how they differ

TPS621323.3 V fixed output, the string on this page
TPS621311.8 V fixed output, same body and same current
TPS621335.0 V fixed output, same body and same current
TPS62130adjustable from an 800 mV reference, for a rail outside the fixed list
DEF pinsets which member the silicon behaves as, and a fixed member reads a high impedance on that pin

Points to check before this part goes on a BOM

Two and a half megahertz is the whole point of this family. At that frequency a 1 microhenry or smaller inductor is enough for 3 A, which is what allows the whole converter to fit in a few millimetres next to a processor. The cost is switching loss and a tighter placement requirement: the input capacitor loop has to be very small, because at 2.5 MHz a few millimetres of trace is a significant inductance.

A fixed 3.3 V output removes two resistors and a tolerance term. The divider on an adjustable part contributes its own error and draws current from the rail continuously. The fixed member has neither, which is why it is preferred on a rail that runs all the time. The trade is that 3.3 V is the only value available from this string.

Seventeen microamp of quiescent current with 3 A of capability is an unusual pair. Most 3 A converters draw hundreds of microamp, which rules them out for a product that keeps the rail alive while the rest of the system sleeps. This one keeps the rail alive at a cost that is negligible against the self discharge of a battery, and it still delivers a full 3 A when the load wakes up.

Power save mode changes the ripple at light load. Below a few tens of milliamps the converter reduces its switching frequency and the ripple becomes a low frequency wave. For a digital rail that is invisible. For a rail feeding an analogue front end it is not, and the mode can be forced to continuous operation by a pin on this family, at the cost of the light load efficiency.

One hundred per cent duty cycle mode is what keeps a rail alive in a brownout. When the input falls close to 3.3 V the converter stops switching and passes the input through, minus the resistive drop. The output follows the input down rather than dropping out, which keeps a processor running through a supply dip instead of resetting it.

The QFN-16 body is 3 mm by 3 mm and has an exposed pad. At 3 A the conduction and switching losses together are around a watt, and the pad is the path. A board with vias under the pad and copper on the other side carries it. A board that puts the part on a narrow trace and relies on the leads does not, and the symptom is efficiency that falls as the board warms up.

A power good output on a fixed output part is more useful than it looks. It lets a sequencer start the next rail without a fixed delay, and it reports a real fault if the output collapses. On a board with four rails that is the difference between a defined start order and a race that works on the bench and fails in the field.

Three volts input is low enough to run from a lithium cell, and 17 V is high enough for a 12 V rail. That combination covers a portable product and an industrial one with the same part, which is why this family appears in both. A 24 V bus is outside the rating, and a 12 V rail with load dump is outside it too.

Reel options are 3000 and 250 pieces. The R string carries the large reel and the T string a small one, from the same silicon. A prototype build of a few hundred pieces is the case for the small reel, and a distributor moving between the two changes the packing rather than the part.

What to confirm before this part goes on a purchase order

Confirm the output voltage. This string is fixed at 3.3 V and the 1.8 V and 5.0 V members are different order codes with the same body.

State the input bus and whether the rail sleeps. The 17 microamp quiescent current is the reason to choose this family for a standby rail, and a rail that never sleeps may be better served by a cheaper part.

Where this order code fits

It makes a 3.3 V or 5 V rail at 3 A from a 12 V rail in a dense board where the inductor height and the switching frequency decide whether the circuit fits. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

Can the output be changed to 1.8 V? Not on this string. The output is fixed at 3.3 V by the part number, and the 1.8 V member of the family is TPS62131 with the same body and pin out. The adjustable member TPS62130 can be set to any value from 0.9 V to 6 V with a divider.

Why does the converter run at 2.5 MHz? To make the inductor small enough for a dense board and to improve the transient response. The penalty is switching loss and a strict requirement on the input capacitor loop, which has to be as short as possible for the part to meet its emission and efficiency numbers.

What happens when the input falls below 3.3 V? The converter enters 100 per cent duty cycle mode and passes the input through, minus the resistive drop of the high side switch and the inductor. The output follows the input down instead of collapsing, which is what keeps a processor running through a short supply dip.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.