Contact Us

TPS61261DRVR

Brand: Texas Instruments
Texas Instruments TPS61261DRVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS61261DRVR — Power Management & Signal Chain | Superb Automation

TPS61261DRVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS61261DRVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS61261DRVR: 0.8 V to 4 V input, 100 mA synchronous boost converter for single cell and coin cell supplies

TPS61261DRVR is a synchronous boost converter with a programmable average output current that keeps working down to 0.8 V input in a WSON (DRV) body of 6 pins. It boosts from as low as 0.8 V to 1.8 V through 4 V output at up to 100 mA, switches at a quasi fixed 2.5 MHz, and draws 29 microamp of quiescent current, which is what a coin cell can afford.

Order code and package

Ordering stringTPS61261DRVR, DRV package, 2 mm by 2 mm 6-pin WSON, tape and reel
Family membersTPS61260 and TPS61261, fixed and adjustable output options
Package6-pin WSON, 2.00 mm by 2.00 mm
Ambient range-40 C to 85 C
Output optionsFixed or adjustable from 1.8 V to 4.0 V
Assembly noteThe 2 mm body has a thermal pad and no leads to inspect, so the stencil aperture matters

Electrical parameters that decide the application

Input range0.8 V to 4.0 V, with startup assisted by the advanced soft start
Output current100 mA at 3.3 V out with the input above 1 V
Switching frequencyQuasi fixed 2.5 MHz
Quiescent current29 microamp
Average output currentProgrammable from 10 mA to 100 mA
Switch current limitAdjustable, up to 700 mA average in the switches
ProtectionsOutput over voltage, under voltage lockout, load disconnect during shutdown
EfficiencyUp to 95 percent

Points to check before this part goes on a BOM

A boost converter that starts at 0.8 V is a different problem from one that runs at 0.8 V. The internal circuit needs a supply to drive the switch, so the part uses the output side to bootstrap, and the advanced soft start is what limits the current while the output is still below the input. On a coin cell with several ohm of internal resistance, a converter without that control pulls the cell below its cutoff during startup and never leaves the start attempt.

The 29 microamp quiescent current is the number that decides whether the product survives shelf life. Over a year it is 254 mAh, which is already more than a CR2032 holds, so a product that must sit for a year has to use the shutdown state rather than the no-load state. In shutdown the load disconnect feature removes the path from input to output, so the cell is not drained through the output divider either.

The programmable average output current is unusual and useful. Instead of limiting only the switch current, the part regulates the average delivered current, so an LED string or a sensor heater gets a defined current rather than a defined voltage. That turns the converter into a constant current source with a voltage ceiling, which is what a coin cell driven LED indicator actually needs.

Quasi fixed frequency means the 2.5 MHz is nominal and moves with the operating point, so the inductor and the output capacitor are chosen around a band rather than a single value. At 100 mA out and 3.3 V the input current from a 1.2 V cell is around 300 mA, and the ripple in a 2.2 microhenry inductor at that current is a significant fraction of the average, which is why the switch limit is programmable up to 700 mA.

The 100 mA rating is tied to the input voltage. At 3.3 V out and 1.2 V in the conversion ratio is 2.75, and with 85 percent efficiency the input current for 100 mA out is about 320 mA, which is close to what a single alkaline cell can deliver without a large voltage drop. At 0.9 V in the same output can only be sustained at a lower current, and the data sheet curve is the honest source for that limit.

Output over voltage protection is what protects the load if the feedback divider opens. Without it the boost loop would run to the maximum duty and take the output to whatever the switch and the diode allow, which on a 6 V rated part is enough to destroy a 3.3 V sensor. The protection is internal and non latching, so the device recovers once the fault is removed, which is the right behaviour for a portable instrument.

The inductor and the switch current limit have to be chosen together. At 2.2 microhenry and 2.5 MHz the ripple at a 300 mA input current is a large fraction of the average, so the peak reaches the 700 mA switch limit at a load well below the 100 mA output rating when the input is low. Raising the inductance to 4.7 microhenry halves the ripple and moves the peak back inside the limit, at the cost of a larger part and a slower loop. That trade is the difference between a boost that delivers 100 mA from a fresh cell and one that only reaches it above 1.2 V input.

Where this order code fits

It is used in single and dual cell alkaline, NiCd and NiMH products, coin cell devices, personal medical products, LED indicators, wireless headsets and industrial metering, where the supply has to keep working as the cell approaches the end of its discharge. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Medical Device Components page.

Questions buyers ask

Can it start from a coin cell? Yes, the advanced soft start is intended for high impedance sources such as coin cells, and the input range starts at 0.8 V, but the available output current at that input is well below the 100 mA figure.

Does it disconnect the load in shutdown? Yes. The load disconnect feature removes the path between input and output when the device is off, so the cell does not discharge through the output network.

What sets the output current limit? An external component sets the average output current between 10 mA and 100 mA, and a separate setting limits the switch current for inductor protection.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.