Contact Us

TPS61020DRCR

Brand: Texas Instruments
Texas Instruments TPS61020DRCR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS61020DRCR — Power Management & Signal Chain | Superb Automation

TPS61020DRCR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS61020DRCR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS61020DRCR: synchronous boost converter for one to three cell battery products

TPS61020DRCR is a synchronous boost converter that starts from 0.9 V and holds a 3.3 V rail from one to three cells in a VSON body of 10 pins. The part starts from 0.9 V and, once running, takes up to 6.5 V on the input, so a single alkaline cell at the end of its life and a three cell pack at the start of theirs use the same circuit. The feedback pin regulates 500 mV, the switch current limit is 1.5 A typical on this member, and the body is a 10-pin VSON measuring 3.00 mm by 3.00 mm.

Order code and package

TPS61020DRCR10-pin VSON (DRC), 3000-piece large reel, marking BDR, -40 C to 125 C
TPS61020DRCRG4same body and reel, green row, marking BDS
TPS61020DRCR.Balternate assembly row on the same body and reel
Moisture sensitivityLevel-2-260C-1 YEAR, NIPDAU and NIPDAUAG finishes
Family in the same documentTPS61020 through TPS61029, adjustable and fixed output members

Electrical parameters that decide the application

Minimum input voltage for start-up0.9 V minimum, 1.2 V maximum, into a 120 Ohm load
Input voltage after start-up0.9 V to 6.5 V on the 61020, 61028 and 61029 members
Input voltage, 5.5 V members0.9 V to 5.5 V on the members with the lower ceiling
Feedback voltage490 mV minimum, 500 mV typical, 510 mV maximum
Switch current limit1200 mA minimum, 1500 mA typical, 1800 mA maximum on this member
Switch on resistance, SWP290 mOhm at 3.3 V output
Total accuracyplus or minus 3 per cent including line and load regulation
Quiescent current from the battery1 uA typical, 3 uA maximum at 1.2 V
Shutdown current0.1 uA typical, 1 uA maximum at 1.2 V
Undervoltage lockout0.8 V, set by the low battery input divider

Members of the family and what changes

TPS61020, TPS61028, TPS61029500 mV feedback, adjustable output by divider
Fixed output membersthe divider sits inside the body, so no external feedback pair
TPS61024same 1200 to 1800 mA switch window, different fixed output row
TPS61028800 mA switch limit, the low current member of the family
Low battery comparatora separate input and output flag the cell going flat
Power save inputthe PS pin selects between the low ripple and the low current mode

Points to check before this part goes on a BOM

Start-up needs 0.9 V minimum under a 120 Ohm load, but that is the start-up condition and not the running condition. A cell that has fallen to 0.9 V will start the converter and then be asked for far more current than it can give, so the practical floor for a 100 mA load is closer to 1.2 V, and the data sheet curves show where the load line crosses the cell curve.

The input ceiling is 6.5 V after start-up on this member and 5.5 V on the others, which matters when the same board is built for a three cell pack and for a USB rail. A 5 V USB input sits comfortably under both, but a 6 V lantern battery pack only works on the members with the 6.5 V ceiling.

The switch current limit on this member is 1200 to 1800 mA with 1500 mA typical, which sets the deliverable output current together with the input to output ratio. A 3.3 V output at 200 mA from a 1.5 V cell needs about 500 mA of input current, which is inside the window, while a 5 V output at 200 mA from the same cell is not.

The 500 mV feedback keeps the sense dissipation low, 50 mW at 100 mA, and it also means the divider current can be small. A 200 kOhm and 30 kOhm pair draws about 6 uA from the output, which on a battery product is a real term in the standby budget and should be chosen deliberately rather than copied.

Quiescent current from the battery is 1 uA typical and 3 uA maximum, and shutdown current is 0.1 uA typical. On a product that sleeps for months, the 3 uA maximum is the number to plan with, because the typical figure is not a guarantee and the part is not binned for it.

Total accuracy is plus or minus 3 per cent including line and load regulation, which covers the DC behaviour but not the ripple. A load that is sensitive to the switching residue needs the output capacitor selected from the ripple curves rather than from the accuracy figure.

The low battery comparator has its own input and its own output flag, so a product can warn before the converter drops out. Its threshold is set by the same kind of divider as the feedback network, and the two dividers should be fed from the same point, otherwise the warning arrives after the rail has already sagged.

The power save input selects between a low ripple mode and a low current mode. The low current mode lets the part skip cycles at light load, which is worth several hundred microamps on a load that idles, and it costs ripple at the output, which is the trade every battery product makes.

The VSON body is 3.00 mm by 3.00 mm with ten pins and an exposed pad, and at 1.5 A of switch current the pad is the only path for the heat. A board that uses the part at full limit in a sealed enclosure should check the junction against the 125 C ambient rating with the actual copper area under the pad.

The marking differs between the plain and the green rows, BDR and BDS, on what is otherwise the same part. A build that mixes reels from two purchase orders will show two markings on the same board, and an inspector who reads marking as a traceability check needs both codes on the paperwork.

The whole TPS6102x family shares the 10-pin VSON body, so a board built around one member can usually take another when the cell count or the load changes, provided the inductor, the feedback divider and the input capacitor are checked against the new member's switch limit and reference. The family also carries fixed output members whose divider is inside the body, which removes two resistors and their tolerance from the output budget, at the cost of one order code per rail.

Where this order code fits

It holds a 3.3 V or 5 V rail in a portable audio player, a meter, a remote control or a handheld instrument that runs from one to three alkaline or NiMH cells, or from a single lithium cell, and has to keep the rail up as the cells discharge. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the How to Reduce Component Cost page.

Questions buyers ask

Will it run from a single alkaline cell to the end? It starts at 0.9 V and keeps running below 1 V, but the current it can deliver at that input is small. A 3.3 V rail at 50 mA from a cell at 1.0 V is realistic, while 200 mA is not, and the curves in the data sheet show the boundary.

What sets the output voltage? Two resistors from the output to the feedback pin and from that pin to ground. The part regulates the feedback pin to 500 mV, so the divider ratio sets the output and the divider current sets part of the standby draw.

Can it deliver 5 V from two cells? Yes, within the switch limit. Two alkaline cells at 2.4 V to 5 V out at 200 mA is about 500 mA of input current, which is inside the 1.2 A minimum limit, but the efficiency at that ratio is lower than at 3.3 V out.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the BOM Shortage Recovery page sets out the checks that keep a substitute from failing on the bench.