TPS53625RSMR
Product Specifications
TPS53625RSMR
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS53625RSMR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS53625RSMR: the two phase VR12.0 controller in a 4 mm VQFN
TPS53625RSMR is a two phase step-down controller written to the VR12.0 specification, the generation of processor power that Intel defined before VR13. It is a driverless controller: it produces pulse width modulated drive signals for external power stages and holds no switches of its own, so the current capability is set by the stages on the board rather than by the controller body. The 32-pin VQFN measures 4 mm by 4 mm on a 0.4 mm pitch with a 1 mm maximum height, which is why it fits under a processor socket keep out on a dense server or desktop board.
The string on our page is the RSM carrier on a 3000 piece large reel. The T tail is the same device on a 250 piece small reel, and both rows carry the same marking, TPS53625, so the reel label is the only thing that separates them once the parts leave the bag.
The numbers below come from SLUSEW7, June 2022, and from the packaging addendum at the back of that document. They cover the output range the internal digital to analogue converter can address, the telemetry interface, the overshoot and undershoot reduction levels, the carrier rows and the moisture level, which for this device is level 1 with no floor life limit.
What the order code sits on
| Function | two phase step-down controller for processor core rails, driverless |
| Specification | VR12.0 serial VID compliant |
| Phase count | one or two phases, with zero load and non zero load overlapping pulse support |
| Output range | 8 bit converter, 0.25 V to 1.52 V |
| Control | D-CAP+ with adaptive on time and phase balancing |
| Transient features | 8 independent levels of overshoot reduction and undershoot reduction |
| Light load | single phase operation in continuous or discontinuous conduction mode |
| Telemetry | VR12.0 serial VID interface for voltage, current and power state |
| Package | VQFN, 32 pins, 4 mm by 4 mm, 0.4 mm pitch, 1 mm maximum height |
| Reel | 3000 pieces on a large reel, 250 on the small reel |
| Lead finish | NIPDAU |
| Moisture level | Level-1-260C-UNLIM, no floor life limit |
| Operating temperature | minus 40 to plus 105 degrees |
| Part marking | TPS53625 |
| Document | SLUSEW7, June 2022 |
What driverless means for a bill of materials
A driverless controller holds the control loop but not the power switches, so the board carries two power stages, an inductor per phase and the output capacitors. That is more parts than an integrated converter, and it is the right answer for a processor rail because the current is far beyond what an integrated body can pass. A 4 mm controller plus two stages can deliver a hundred amps into a sub one volt rail, and no single package integrates that.
The consequence for procurement is that the controller and the stages are separate part numbers with separate lead times, and a shortage of either stops the build. It is also the reason a driverless controller is easy to re-source on paper and hard to re-source in practice: the pin pattern has to match the existing board, and the drive signals have to be compatible with the stages that are already on it.
The VR12.0 generation is now two specifications behind the current processor rails, which is the fact that decides whether this part belongs in a new build at all. Boards already released around a VR12.0 processor keep buying it, and a new board around a current processor is looking at a VR13 or later controller with a different interface and a different pin pattern. The vendor still prints this device as active on the addendum, so the part is buyable rather than end of life, but the specification it serves is what determines the demand.
The output range and the eight bit converter
The internal converter addresses 0.25 V to 1.52 V in eight bit steps, and the serial VID interface from the processor sets the code. The resolution at the bottom of the range is a few millivolts, and at the top it is larger because the same number of codes covers a wider span. A processor that changes its operating point during a load step does so by sending a new code, and the controller moves the reference with a controlled slew rate rather than in a single step.
Voltage positioning is the other half of the loop. The controller lets the output sit at the top of the tolerance band at light load and droop under heavy load, which reduces the capacitance needed for a given transient. The amount of droop is set by the load line, and a board that has been tuned for one processor cannot simply be re-populated with a different one without rechecking that line.
Overshoot and undershoot reduction are the two features that make the transient response look better than the loop bandwidth suggests. When the load drops, the controller detects the overshoot and reduces the on time of the phases to bring the rail back without waiting for the error amplifier; when the load rises, it does the opposite. Eight levels of each are available, and the level is set by register rather than by an external component, so the tuning is done through the serial interface rather than by changing parts.
Driving external stages from 32 pins
The 32 pins carry the pulse width modulated outputs, the current sense inputs, the serial VID lines, the telemetry and the bias. Because the stages are external, the current sense is also external, and the accuracy of the rail's current limit depends on the sense elements on the board rather than on anything inside the controller. A build that moves from a discrete sense resistor to inductor direct current resistance sensing changes the gain of that loop, and the controller has to be re-tuned for the new gain.
The 0.4 mm pitch is the assembly constraint that matters most. A 4 mm body with 32 pins at that pitch is at the edge of what a standard stencil can print cleanly, and the paste aperture for each pad is a fraction of a millimetre. A line that runs this package has a stencil and a reflow profile for it; a line that has never run it will see bridging on the first panels and will need an aperture reduction before yield settles.
Moisture level 1 with an unlimited floor life removes one handling rule entirely. A reel can sit on a shelf for a year, be opened, and go straight to the machine without a bake, which is the practical difference between this part and the level 2 and level 3 parts that need a dry cabinet and a seal date log. For a contract assembly line that distinction matters more than any electrical parameter on this page.
Carriers, reels and what the addendum prints
| TPS53625RSMR | VQFN RSM, 32 pins, 3000 pieces, large reel, active |
| TPS53625RSMT | same body, 250 pieces, small reel |
| Reel dimensions | 330 mm reel, 12.4 mm width, 4.25 mm pocket, 8 mm pitch |
| Lead finish | NIPDAU, nickel palladium gold |
| Moisture level | Level-1-260C-UNLIM |
| Operating temperature | minus 40 to plus 105 degrees on every reel row |
| Part marking | TPS53625 across two lines |
| Body | 4 mm by 4 mm, 0.4 mm pitch, 1 mm maximum height |
The 105 degree operating limit is the line to read carefully when the part is compared with the controllers around it. The server memory and core controllers in the same catalogue are printed at 125 degrees, and this one at 105, so a chassis with poor airflow that was qualified with a 125 degree controller cannot simply take this part. The difference is not a marketing detail; it is the ambient the die is tested to.
Where this controller still fits
The applications are processor core rails in desktop, workstation and entry server boards built to the VR12.0 generation, plus any board that has to stay compatible with a processor whose VID interface is VR12.0. The realistic demand today is repair, spare and bridge production: a board that is still produced around an older processor, or a service organisation that needs controllers for boards already in the field.
For a customer holding a board that needs this part, the useful comparison is the serial VID generation, the phase count and the output range, in that order. A controller from a later generation will not talk to a VR12.0 processor regardless of how similar the pin pattern looks. The fields to compare are listed on our power management cross reference page. If the string has already gone end of life at the vendor, the obsolete part cross reference hub covers the route where an alternative has to be qualified rather than looked up.
Questions buyers ask before a first order
Does this controller have integrated switches? No. It is driverless, so the power stages, the inductors and the current sense elements are all on the board.
Can it drive a rail above 1.52 V? Not through the internal converter. The eight bit range stops at 1.52 V, and a higher rail needs a different controller or an external divider arrangement.
Is it the same part as the TPS53625RSMT? Yes, the same silicon on a 250 piece reel instead of a 3000 piece reel.
What is the operating temperature? Minus 40 to plus 105 degrees on every row of the addendum, which is lower than the 125 degrees printed for the later controllers in this catalogue.