Contact Us

TPS2549IRTERQ1

Brand: Texas Instruments
Texas Instruments TPS2549IRTERQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS2549IRTERQ1 — Power Management & Signal Chain | Superb Automation

TPS2549IRTERQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS2549IRTERQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS2549IRTERQ1: a USB charging port controller with two current limits and cable compensation

TPS2549IRTERQ1 is a USB charging port controller and power switch that detects what is plugged in, sets the data line signature to match, and reports the port current so the upstream supply can compensate for cable drop in a WQFN body of 16 pins. The current sense output feeds the feedback of the upstream regulator, which is how the port keeps 5 V at the far end of a long cable instead of only at the connector.

Order code and package

Catalogue stringTPS2549IRTERQ1, the code printed in the page title
BodyRTE, WQFN, 16 pins, 3.00 mm by 3.00 mm, junction to ambient 44.9 C per watt
Reelthe addendum prints TPS2549RTER at 3000 pieces on a large reel and TPS2549RTET at 250 on a small reel
Finish and moistureNIPDAU plating, moisture level 1, 260 C, unlimited floor life
Temperatureminus 40 to 125 C junction
Marking2549
Suffix checkno published row carries an I before the reel letter and none carries Q1, so the automotive reading of this string is not confirmed by the vendor list

Electrical parameters that decide the application

Input range4.5 V to 6.5 V, which is a 5 V rail with tolerance rather than a battery input
Switch resistance47 mOhm typical at 25 C, 72 mOhm maximum over minus 40 to 85 C, 80 mOhm maximum over the full range
Output current3 A maximum continuous
Current limit, low setting205 mA to 305 mA with a 210 kOhm resistor, 600 mA to 720 mA with 80.6 kOhm, 2145 mA to 2455 mA with 23.2 kOhm
Current limit, high setting2500 mA to 2840 mA with 20 kOhm, 2620 mA to 2975 mA with 19.1 kOhm, 3255 mA to 3685 mA with 15.4 kOhm
Current limit, pin shorted5.5 A minimum, 7 A typical, 8 A maximum with the high limit pin held at ground
Sense output75 uA per amp of load current, with 70 uA to 80 uA across the tolerance band, usable by a regulator feedback node between 2.5 V and 6.5 V
Charging modesCDP per battery charging specification 1.2, and automatic DCP selection between the shorted mode, the 2.7 V divider mode and the 1.2 V mode
Data line protectionshort to VBUS protection on both data lines, plus 8 kV contact and 15 kV air discharge rating without external parts
Discharge resistor400 ohm to 630 ohm on the output when the port is turned off
Logic thresholds1.0 V to 2.0 V rising, 0.85 V to 1.65 V falling, 200 mV of hysteresis
Disabled current0.1 uA typical, 5 uA maximum into the input

Published rows for the sixteen pin body

TPS2549RTER3000 piece large reel, the plain string, active
TPS2549RTER.Athe revision letter row printed separately from the plain one at the same quantity
TPS2549RTERG4the green material row at 3000 pieces
TPS2549RTET250 piece small reel, the prototype quantity
Not publishedno row with an I before RTE and no row with a Q1 suffix appears in this document, which is the industrial TPS2549 revision

Points to check before this part goes on a BOM

Two current limits on one port is a power budget tool, not a fault feature. The high setting is what the port uses when the upstream supply can carry it, and the low setting is what the port falls back to when the adjacent ports are loaded. A board that only ever uses the high setting has no way to keep the 5 V rail up when all four ports pull at once.

The sense output is 75 uA per amp and it is meant to be summed into the feedback node of the upstream regulator. That closes a loop around the cable, the connector and the switch, so the port voltage at the far end of a two metre cable stays near 5 V instead of sagging by the cable drop at 2.5 A.

Automatic detection is what makes the port work with phones that expect different signatures. The part tries the shorted mode, the 2.7 V divider mode and the 1.2 V mode in turn, and settles on the one the device answers. A port built without that logic charges some phones at 500 mA for no visible reason.

The data line protection is worth its board area. A cable plugged in at an angle can put the data line onto VBUS, and a controller without that clamp dies on the first such event. Fifteen kilovolts of air discharge at the connector is also what a port needs to survive a user who has walked across a carpet.

The industrial document does not confirm the automotive and I markings in the catalogue string. That is the one item to settle before a purchase order: either the string is a distributor creation or it refers to a qualified variant that this document does not cover, and the qualification certificate should be asked for against the exact string.

A 47 mOhm switch at 3 A dissipates about 0.42 W. In a 3 by 3 mm body at 44.9 C per watt that is a 19 C rise before any copper, so the thermal land under the part is doing real work and should be counted as part of the port rather than as a formality.

How cable compensation works in practice

The switch and the cable are in series with the load, and at 2.5 A a 200 mOhm cable drops half a volt. Without compensation the phone sees 4.5 V at the far end and charges slowly, which is what users describe as a port that does not fast charge.

The sense output mirrors 75 uA per amp into a resistor to ground, which becomes a voltage that is summed into the feedback divider of the upstream converter. As the load rises, the converter raises its output, and the far end of the cable stays near 5 V. The gain is set by the resistor, so the compensation matches the cable rather than a fixed assumption.

The consequence is that the port voltage at the connector is above 5 V under load. Anything else plugged into the same rail has to accept that, which is a reason to keep the port rail separate from a rail feeding fixed 5 V logic.

Choosing between the two limits

The high limit resistor is set for the cable and the connector, the low limit resistor for the upstream supply. A four port hub on a 30 W adapter sets the low limit so that four ports at the low setting still fit inside the adapter budget.

The control pins decide which limit is active, so the choice can move at run time as ports are plugged and unplugged. A fixed resistor pair with no software control gives one setting for both, which works on a single port device and not on a hub.

Where this order code fits

This is the port controller on a USB hub, a wall charger, a car charger or an aftermarket head unit, where the port has to identify the device and then charge it at the current the supply can carry. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Supplier Quality Audit page.

Questions buyers ask

Can it charge at 3 A? The switch is rated for 3 A continuous and the high limit can be set above that, but the port only delivers what the upstream supply can hold. The 3 A figure is the switch rating, not a promise about the adapter.

What is the sense output for? It mirrors the port current at 75 uA per amp so a regulator upstream can raise its output as the load rises. Without it the port voltage at the far end of the cable falls with load.

Does it support USB battery charging 1.2? Yes, in dedicated charging port mode, and it also handles the Chinese standard shorted mode and the 2.7 V and 1.2 V divider modes automatically.

Is the Q1 suffix real? The document that covers this body lists four strings and none of them carries a Q1. A buyer who needs automotive grade should ask for the qualification against the exact string rather than treat the suffix as confirmed.

What happens if a data line shorts to VBUS? The part has integrated protection on both data lines for exactly that event, which is also why it survives the 15 kV air discharge rating without external clamps.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Incoming Inspection Plan page sets out the checks that keep a substitute from failing on the bench.