Contact Us

TPS22950CQDDCRQ1

Brand: Texas Instruments
Texas Instruments TPS22950CQDDCRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS22950CQDDCRQ1 — Power Management & Signal Chain | Superb Automation

TPS22950CQDDCRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS22950CQDDCRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS22950CQDDCRQ1: 5.5 V, 3.2 A load switch with adjustable current limit and auto retry

TPS22950CQDDCRQ1 is a load switch with an adjustable current limit from 50 mA to 3.5 A and auto retry behaviour in a SOT-23 body of 6 pins. On resistance is 34 milliohm at a 5 V bias and 41 milliohm at 3.3 V, with a slow turn on of 800 and 550 microsecond respectively, which is deliberately long enough to keep the inrush into a large capacitive load from tripping the upstream supply. The C suffix is the auto retry version, so a fault clears itself instead of latching the branch off until someone power cycles the board.

Order code and package

TPS22950CDDCRActive, SOT-23-6 body, 3000 pieces on a large reel, minus 40 to 125 degrees
TPS22950LYBHRActive, the latch off version in the six ball WCSP package
TPS22950YBHRActive, the auto retry version in the WCSP package
The Q1 automotive suffixno Q1 row appears in this addendum, the rows printed are plain TPS22950 strings
CertificationUL 2367 recognised, file E169910, certified from 66 mA to 2.46 A

Electrical parameters that decide the application

Input voltage1.8 V to 5.5 V
Current limit range50 mA to 3.5 A typical, set by a resistor
On resistance at 5 V34 milliohm typical
On resistance at 3.3 V41 milliohm typical
Turn on time800 microsecond at 5 V, 550 microsecond at 3.3 V
Quiescent current40 microamp in the on state, 0.2 microamp off
Quick output discharge150 ohm when the switch turns off
Pulsed current6 A maximum at 85 degrees junction with a 2 per cent duty cycle

Family variants and how they differ

610 ohm limit resistor1.54 to 2.46 A
1.15 kohm limit resistor0.75 to 1.25 A
2.21 kohm limit resistor0.38 to 0.62 A
19.2 kohm limit resistor34 to 66 mA
C suffixauto retry after a fault, this order code
L suffixlatch off after a debounce window, needs a power cycle or an enable toggle

Points to check before this part goes on a BOM

Auto retry and latch off are two different products in one family. The C suffix retries, so a branch that sees a transient short recovers on its own and the equipment keeps working. The L suffix latches, so the fault stays visible until something resets it. On an unattended device the retry version is usually right, and on a device where a repeating fault could damage the load the latch version is.

The limit resistor table is coarse and that matters at low currents. 610 ohm gives 1.54 to 2.46 A, which is a wide window. 19.2 k gives 34 to 66 mA, which is the same absolute spread around a much smaller current, so the relative accuracy at the bottom of the range is far worse. A branch that has to protect a 100 mA load is working near the bottom of the certified range.

800 microsecond of turn on is a deliberate choice, not a slow part. The inrush into a 100 microfarad load at 5 V would be tens of amp if the switch closed in a microsecond. Ramping over 800 microsecond keeps that inside the current limit and inside what the upstream regulator can supply. Changing the switch for a faster one to save start up time would move the problem to the upstream rail.

0.2 microamp in the off state is what makes the branch worth switching. The switch exists to remove the load from the battery. If the off state leaked a microamp the branch would still drain the pack, and the 40 microamp on state figure shows that the saving only appears when the load is actually off for long periods.

150 ohm quick output discharge is not a bleeder for a big capacitor. It discharges the output when the switch turns off, which keeps a connector from staying live. It is not sized to empty a thousand microfarad quickly, and a rail that must be dead within milliseconds needs an active discharge sized for that job.

This addendum prints no Q1 row. The catalogue string carries the automotive Q1 suffix, but the orderable rows in the document are plain TPS22950 strings. An automotive customer needs the Q1 document and the AEC-Q100 paper, so the status of the Q1 string has to be confirmed before it is offered on a vehicle programme rather than assumed from the part number.

The pulsed current rating is a separate limit from the DC limit. 6 A is allowed at 85 degrees junction with a 2 per cent duty cycle. A load that draws a 5 A pulse for 10 per cent of the time is outside that window even though 5 A is below the figure, and the thermal result is what fails first.

The WCSP body and the SOT-23 body are the same silicon. Both appear in the addendum with the same current limit behaviour, but the land patterns and the thermal paths differ. A substitution between them is a board change, and the WCSP body is the one that suits a phone sized board while the leaded body suits a board that has to survive thermal cycling.

The 5.5 V rating is a ceiling, not a target. A 5 V rail with a 10 per cent transient reaches 5.5 V exactly, so a port on a 5 V rail behind a charger that overshoots sits at the operating maximum. A part that runs at its maximum on every hot plug has no margin left for the next transient, and a 3.3 V rail behind the same switch is the calmer arrangement.

Quick output discharge is a convenience, not a safety function. 150 ohm empties a small output capacitor but not a large one, and a port that has to be dead within a defined time needs an active discharge sized for that time.

The enable pin is a logic input, not a ramp control. Driving the enable through an RC network produces an undefined state in the switch rather than a controlled ramp, because the device already has its own slow turn on. The ramp comes from the part, not from the pin.

What the UL 2367 recognition actually covers

The certificate is held from 66 mA to 2.46 A of limit current, which is narrower than the electrical range of the part. A branch set below 66 mA is outside the certified window.

The file number has to appear on the customer's safety submission, so the certificate is a document to ask for at quotation stage rather than after the technical review.

Where this order code fits

It protects a 5 V or 3.3 V branch against a short at the load, on boards that have to meet UL 2367 with a resettable limit instead of a fuse. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Component Lead Time Solutions page.

Questions buyers ask

What is the difference between the C and the L version? The response to a fault. The C version retries, so the switch turns back on after the fault clears. The L version latches off after a debounce window and stays off until the enable is cycled.

Can it be used on a 3.3 V rail? Yes. The input range starts at 1.8 V, and on resistance at 3.3 V is 41 milliohm. The turn on time is also shorter at that bias, which affects the inrush calculation.

Does it block reverse current? The TPS22950 provides always-on reverse current blocking, so a load that is at a higher potential than the input does not feed back through the switch. That is one of the differences from a plain load switch with a body diode.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.