TMS5700332APZQQ1
Product Specifications
TMS5700332APZQQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The TMS5700332APZQQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TMS5700332APZQQ1: lockstep Cortex-R4F safety microcontroller with 256K bytes of flash in the 100 pin body
TMS5700332APZQQ1 is the 256K byte member of the TMS570 safety line, keeping the lockstep pair and the full diagnostic set in a 100 pin LQFP in a LQFP body of 100 pins. This is the LS0332: 80 MHz Cortex-R4F pair in lockstep, 256K bytes of program flash with ECC, 32K bytes of ECC RAM and 16K bytes of emulated EEPROM, all in a 100 pin body measuring 14 by 14 mm. The A in the code is the silicon revision, PZ the body, and the QQ1 marking is the automotive grade that the data sheet specifies from minus 40 to 125 C. Peripherals match the rest of the 0x32 family, including two CAN controllers and a 16 channel 12 bit ADC.
Order code and package
| Order code | TMS5700332APZQQ1 |
| Core | dual Cortex-R4F in lockstep, 80 MHz |
| Package | LQFP, 100 pins, body code PZ |
| Flash | 256K bytes with ECC |
| RAM | 32K bytes with ECC |
| Emulated EEPROM | 16K bytes |
| ADC | 12 bit, 16 channels |
| CAN | two DCAN controllers |
| Supply | 1.2 V core, 3.3 V I/O |
| Safety | lockstep, BIST, ECC, error signalling module |
| Temperature | minus 40 to 125 C, automotive grade |
| Datasheet | SPNS186C, revised May 2018 |
Electrical parameters that decide the application
| Silicon revision | A, marked in the order code |
| Flash size | 256K bytes, against 384K bytes on the LS0432 |
| RAM | 32K bytes, ECC protected |
| N2HET | 19 pins, 128 word instruction RAM, angle generator |
| ADC buffers | 64 results with parity protection |
| Serial | two DCAN, MibSPI, two SPI, SCI with LIN |
| eQEP | motor position encoder interface |
| CRC | two channel checker on the safety path |
| MPU | 8 region memory protection |
| Clock | FMPLL with slip detector |
| Debug | JTAG and CoreSight components |
| Grade | Q1 automotive marking, minus 40 to 125 C |
Points to check before this part goes on a BOM
The only difference between the LS0332 and the LS0432 is flash size, 256K against 384K bytes, and they share the same data sheet, the same 100 pin body and the same peripheral set. That makes the choice a code size question, and it makes the two parts interchangeable on a board that has spare flash headroom, which is useful when one of them is short.
The silicon revision letter sits in the order code and it matters for errata. A firmware workaround written against an A revision may be unnecessary on a later one, and a bug fixed in the later silicon is still present in the earlier. We record the revision on every offer so that the customer's production file and the parts on the line match.
The safety documentation for this family covers ISO 26262 and IEC 61508 use, and the diagnostic software package is part of the qualification, not an option. A board built with the part but without the self test sequence passes the bench and fails the assessment, and the difference is a firmware decision made before the first prototype.
The N2HET is a timer coprocessor with its own instruction set and 128 words of instruction RAM. It can generate complex pulse trains and capture edges without loading the core, which is how a single lockstep pair runs several control loops at once. The cost is that the N2HET program is written in its own language and has to be qualified like any other safety relevant code.
The ADC has sixteen channels and sixty four result buffers, and the buffers are parity protected. On a motor controller the current samples have to land at a fixed point in the PWM period; the trigger comes from the timer and the buffer index has to be checked, otherwise a missed conversion reads as a plausible but stale current and the loop reacts to the wrong number.
The 100 pin body is small enough to fit on a dense board and it is still 14 by 14 mm, which means the thermal path is short but the copper under the body has to be planned. At 125 C ambient the junction depends on the dissipation of the core pair and the I/O ring, so the thermal calculation belongs in the board review, not in the bring up.
The 100 pin body commits sixteen analogue channels and two CAN interfaces, and on a dense board those pins are already spoken for by the power stage. A sensor added after the board is released usually has to share an existing channel through an external multiplexer, which adds settling time inside the current loop. Freeze the channel list together with the pin mux.
Where this order code fits
Body and chassis domain controllers, electric drive inverter control, battery management, and industrial safety functions built to IEC 61508 where the same device family can be used from prototype to production without changing the tool chain. Boards comparing it with a neighbouring part start from our MCU Cross Reference page, and boards replacing a part that has gone end of life start from the Incoming Inspection Plan page.
Questions buyers ask
How do I choose between this and the LS0432? By code size. The two parts share a data sheet, a body and a peripheral set; the LS0432 carries 384K bytes of flash and this one 256K. If the application fits in 256K with room for an update image, this is the cheaper part and the same board takes either.
Is the A revision in the code important? Yes, it identifies the silicon revision and therefore which errata apply. The revision should match the production firmware's assumptions, and we state it on the offer so the build and the file stay aligned.
Does the part need external memory? No. The application, the calibration area and the fault log all fit in the on chip flash, and the 32K bytes of RAM hold the working set. External memory would only add pins and a failure mode.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Obsolete RF Part Replacement page sets out the checks that keep a substitute from failing on the bench.