Contact Us

TMS470R1A256PZ

Brand: Texas Instruments
Texas Instruments TMS470R1A256PZ is a power management component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS470R1A256PZ — Power Management & Signal Chain | Superb Automation

TMS470R1A256PZ

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS470R1A256PZ from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS470R1A256PZ: ARM7TDMI flash microcontroller with 256K bytes and a 100 pin body, industrial temperature

TMS470R1A256PZ is a 24 MHz ARM7TDMI core with 256K bytes of program flash, a 16 channel high end timer and a CAN controller, in a 100 pin LQFP for boards that need a general purpose 16 and 32 bit core with real peripherals in a LQFP body of 100 pins. The A256 is the 256K byte member of the TMS470R1A family, built on the ARM7TDMI core and running at 24 MHz system clock with a 48 MHz pipeline mode. Flash is one bank of fourteen contiguous sectors with an internal state machine for program and erase, the SRAM is 12K bytes with a further 1K byte of high end timer RAM, and the core runs from 1.81 to 2.05 V with a 3.0 to 3.6 V I/O ring. The PZ body carries 100 pins.

Order code and package

Order codeTMS470R1A256PZ
CoreARM7TDMI, 16 and 32 bit instruction set, big endian
Clock24 MHz system clock, 48 MHz pipeline mode
PackageLQFP, 100 pins, body code PZ
Flash256K bytes, one bank, 14 contiguous sectors
SRAM12K bytes, plus 1K byte HET RAM
High end timer16 channels, 14 high resolution, 2 standard
ADC10 bit, 16 inputs, 64 word FIFO
Serialtwo SPI, two SCI, CAN controller with 16 mailboxes
Core supply1.81 to 2.05 V
I/O supply3.0 to 3.6 V
DatasheetSPNS100B, revised August 2006

Electrical parameters that decide the application

Instruction cycleone system clock, 24 MHz, pipeline mode doubles the throughput
Flash endurance50 000 write and erase cycles at minus 40 to 125 C
Sector erase1.7 s typical for a sector
Full program28 s typical for the whole 256K byte array
ADC10 bit, 16 inputs, 64 word result FIFO
HET channels16 programmable, 14 high resolution, shareable with XOR
CANsingle controller, 16 mailboxes, protocol 2.0B
C2SIbclass II serial interface, 10.4 kbps normal and 41.6 kbps in 4X mode
Watchdoganalog watchdog with external RC
Clock modulezero pin PLL, multiply by 8 option
Low powerSTANDBY and HALT modes
Temperatureextended industrial, T and Q options defined in the nomenclature

Points to check before this part goes on a BOM

The two clock figures are not the same thing. The system clock is 24 MHz and the pipeline mode runs the core at 48 MHz, so a loop that was timed at 48 MHz and then runs without the pipeline is half the speed. Flash access and the peripheral clock are set from the same tree, so the pipeline setting also changes the timer base if it is not compensated.

Flash endurance is 50 000 cycles across the whole temperature range, and each erase takes 1.7 s. That is enough for parameter storage if the writes are spread over sectors, and far too little for a logger that writes every second. A board that stores counters in flash needs a wear levelling scheme or an external EEPROM, and the sector map of fourteen contiguous sectors is what the scheme has to work with.

The HET is the reason to pick this family over a plain ARM7 part. Sixteen channels with fourteen high resolution outputs can generate the PWM, the capture and the pulse trains that would otherwise need external logic, and the XOR share feature lets two channels share one pin structure. It is programmed in its own instruction set, so the code that drives it is not portable C.

Core supply is 1.8 V nominal with a window of 1.81 to 2.05 V, which is narrow. A regulator with two percent accuracy and a hundred millivolts of drop over temperature is already at the edge, and the part will run at 1.7 V on the bench and fail in the field. Set the regulator at 1.9 V and check it at the pins under load.

The CAN controller has sixteen mailboxes and is protocol 2.0B compliant but it is a single controller. A board that needs two independent CAN channels has to move to the A288, which carries two SCC controllers. That difference is easy to miss when the two order codes are compared on price alone.

The 10 bit ADC has sixteen inputs and a 64 word FIFO. The FIFO lets a conversion sequence complete without the core reading each result, which matters at 24 MHz where a per conversion interrupt would eat a large share of the cycles. Group the channels so that the FIFO holds a whole sequence and read it in one burst.

Where this order code fits

Industrial controllers and interface boards that need a 32 bit core with CAN, two serial ports, two SPI ports and a flexible timer: motor and actuator control, building and factory automation nodes, instrumentation front panels, and automotive body modules on the T grade. Boards comparing it with a neighbouring part start from our MCU Cross Reference page, and boards replacing a part that has gone end of life start from the Component Obsolescence Management page.

Questions buyers ask

Does the PZ body carry the external expansion bus? No. The expansion bus module exists on the 144 pin PGE body of the A288 and not on this 100 pin part. If the board needs an 8 or 16 bit external memory or a peripheral bus, the body has to change.

How many CAN channels does this part have? One controller with sixteen mailboxes, compliant to protocol 2.0B. Two independent controllers are on the A288, which is the part to quote when a board has to sit on two networks at once.

Is the temperature grade in the order code? The data sheet defines T as minus 40 to 105 C and Q as minus 40 to 125 C for this family, and the letter sits at the end of the order code. We confirm the grade from the packaging data before the offer goes out, because the same body is sold in both ranges.

SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.