Contact Us

TMS320LF2401AVFA

Brand: Texas Instruments
Texas Instruments TMS320LF2401AVFA is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320LF2401AVFA — Power Management & Signal Chain | Superb Automation

TMS320LF2401AVFA

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320LF2401AVFA from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320LF2401AVFA: 40 MHz DSP controller with 8K of flash in a 32-pin LQFP

TMS320LF2401AVFA is a small fixed point DSP controller for space constrained control loops in a LQFP body of 32 pins. It is the smallest member of the C2000 line: a 40 MHz C2xx core with 8K by 16 of flash, 544 words of dual access RAM and a 10-bit converter, in a 32-pin body measuring 7 mm by 7 mm. The VFA order code is that LQFP in the A grade at minus 40 to plus 85 degrees.

Order code and package

Order codeTMS320LF2401AVFA
Package32-pin LQFP, VF body, 7 mm by 7 mm
Packingtray or reel depending on the addendum line
CoreC2xx DSP core at 40 MHz, 25 ns instruction cycle
Memory8K by 16 flash, 544 words of dual access RAM and 512 words of single access RAM
Analogue10-bit converter with 5 multiplexed inputs
Temperatureminus 40 to plus 85 degrees Celsius on the A grade

Electrical parameters that decide the application

Performance40 MIPS at 40 MHz
ADC10-bit, 5 channels, 500 ns minimum conversion time
PWMevent manager with compare channels for motor and power control
Serialone SCI asynchronous port
I/Oup to 13 multiplexed general purpose pins
Supplysingle 3.3 V rail
Timerswatchdog timer and a phase locked loop clock generator

Family variants and how they differ

LF2401A8K of flash, reprogrammable, the part on this page
LC2401A8K of mask ROM, for a frozen program at high volume
VFAthe 32-pin LQFP in the A grade
VFSthe second 32-pin order code listed in the addendum

Points to check before this part goes on a BOM

The flash is 8K by 16 bits, which is 16 kilobytes of program space, and that is the hard limit on this device. A control loop plus a serial protocol fits, and a floating point library does not: this core has no floating point unit, so any maths is fixed point and the scaling is part of the code size.

The dual access RAM is 544 words and the single access RAM is another 512 words. That is enough for a current loop, a state machine and a small buffer, and it is not enough for a logging ring or a protocol stack with a large queue. Products that outgrow the RAM usually move to the F280x generation rather than try to squeeze this one.

The 10-bit converter with five channels converts in 500 ns, and with one sample and hold the channels are measured in sequence. In a motor control application that means the three phase currents are sampled at different instants, which shows up as a small torque ripple that cannot be removed in software without knowing the sample skew.

A 32-pin 7 mm by 7 mm body is the reason this device exists: it fits inside a sensor housing, a fan module or a small actuator where a 64-pin part would not. The trade is pin count: 13 shared I/O pins mean the serial port, the PWM outputs and the converter inputs compete for the same package pins.

The 3.3 V single rail is simpler than the two rail generation that followed in some families, and it also limits the analogue range: the converter measures from ground to the 3.3 V rail, so a current sense signal that swings to 5 V needs a divider and loses resolution. Products that measure a 5 V shunt amplifier output usually rescale it.

The mask ROM version in the same family is the volume play: once the program is frozen, the LC2401A removes the flash cost. That is only worth doing at volumes where the tooling charge amortises, and it locks the code: any firmware change after the mask is cut means a new mask and a new part number.

This generation is old enough that supply comes from allocation and from the aftermarket. A buyer supporting an existing product should record the exact order code with its grade and its packing, because the same device number in another grade or another body is a different line item, and mixing them on one board is a qualification change.

The watchdog and the phase locked loop are on chip, so the external part count is small: a crystal, a few decoupling capacitors and the power supply. That is attractive in a small module, and it also means the clock quality depends entirely on the crystal and the loop filter components, which have to be placed close to the pins rather than at the other end of the board.

The event manager generates the PWM waveforms with a compare unit for each channel, and it runs independently of the core. That is what allows a 40 MHz part to control a motor at 20 kHz: the waveform timing does not depend on the loop finishing on time, only the duty update does.

The 10-bit converter has five channels and one sample and hold, and the conversion takes 500 ns. Three phase currents measured in sequence are 1 microsecond apart at that rate, which is a measurable phase error at 20 kHz. Firmware can compensate for it, but only if the order and the trigger are documented rather than assumed.

The 8K of flash is programmed through JTAG or through a loader in ROM, and the part is small enough that a production fixture can program it in a couple of seconds. A product that needs a field update has to carry a bootloader inside the same 8K, which is a real constraint on the application size.

The 32-pin body leaves 13 shared I/O pins, so the serial port, the PWM outputs and the converter inputs compete. A product that adds a second serial port or a tachometer input usually moves to a 64-pin device rather than multiplex harder, and the change is a board spin.

The part has no external memory bus, so the whole application lives in 8K words of flash and 1K word of RAM. That is a hard ceiling and it is also a benefit in a small module: there are no fast traces leaving the device, and the emissions of a 32-pin part are easier to contain than those of a 176-pin one. In a module where the device shares a housing with a motor driver, the switching node is the dominant noise source and the converter inputs are the most exposed circuit, so the filter on each analogue input and the ground return of that filter are part of the product rather than an optional refinement.

Where this order code fits

It is used in fan and pump modules, small actuators, sensor nodes and appliance controllers where a 32-pin body is the constraint. Teams comparing it with a neighbouring part start from our MCU Cross Reference page, and teams replacing a part that has gone end of life start from the Component Obsolescence Management page.

Questions buyers ask

How much program memory is there? 8K by 16 bit words of flash, 16 kilobytes. The mask ROM version of the same device carries the same size.

Does it have a floating point unit? No. The C2xx core is fixed point, so all maths is scaled integer arithmetic and the code size reflects that.

Can it drive a three phase motor? It has the event manager and compare channels for it, but the five channel 10-bit converter with one sample and hold limits how precisely the three currents can be measured at the same instant.

Is the A grade enough for an outdoor product? It covers minus 40 to plus 85 degrees ambient. An enclosure that exceeds that internal temperature needs a different device generation, because this order code does not have a wider grade.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Obsolete Part Cross Reference Hub page sets out the checks that keep a substitute from failing on the bench.