Contact Us

TMS320F28035PNT

Brand: Texas Instruments
Texas Instruments TMS320F28035PNT is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320F28035PNT — Power Management & Signal Chain | Superb Automation

TMS320F28035PNT

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320F28035PNT from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320F28035PNT sixty megahertz real time controller with a single 3.3 V supply in an 80 pin package

The TMS320F28035PNT is the 80 pin member of the F2803x family, a real time controller that runs a C28x core at 60 MHz with a control law accelerator beside it. What makes the family attractive in cost sensitive products is the supply: one 3.3 V rail, no power sequencing, an internal regulator, and a power on reset with a brown out circuit. There are no analog support pins to filter, and the whole device can be brought up from a single rail without a sequencing supervisor.

The memory is 64K words of flash, which is 128 KB, split into eight sectors of 8K words, plus 10K words of single access RAM and 1K words of one time programmable memory. The part is aimed at motor control, digital power, lighting and appliance drives where a fixed point or light floating point core plus a decent analog front end is enough, and where a two rail device with a sequencing requirement would add cost to the board.

Key parameters taken from the TMS320F28035PNT document

CoreC28x at 60 MHz, 16.67 ns cycle time, 16 by 16 and 32 by 32 multiply accumulate
Co processorcontrol law accelerator, 32 bit floating point accelerator that runs independently of the CPU
Flash64K words, which is 128 KB, in eight 8K word sectors
RAM10K words of single access RAM, 20 KB
One time programmable memory1K words
Supplysingle 3.3 V rail, internal regulator, power on reset and brown out reset, no sequencing required
Analog12 bit converter at 4.6 MSPS with a 216.67 ns conversion time, 16 channels on the 80 pin body
PWM14 channels of enhanced PWM on the 80 pin body
Capture and positionone enhanced capture input, one enhanced quadrature encoder module
Pins45 general purpose input output pins
PackageLQFP PN, 80 pins
Order code factsTMS320F28035PNT, tray of 119, MSL Level-3-260C-168HR, minus 40 to plus 105 C, Active; the .A row of the same code is listed at minus 40 to plus 125 C

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The temperature grade in the order code and in the addendum do not agree on the same line, and it is worth reading both rows. The plain code is printed at minus 40 to plus 105 C while the .A row of the identical string is printed at minus 40 to plus 125 C. On a product that has to run hot, that difference is the difference between passing and failing a soak, and the safe path is to confirm the grade with the vendor or the distributor against the actual reel label rather than to take the first row in the table.

The single rail supply is the reason this part wins cost reviews. A 3.3 V only device with an internal regulator removes the 1.8 V rail, the sequencing supervisor and the tracking requirement, which on a small board is several components and one more thing to get wrong in production. The trade is that the internal regulator dissipates heat, so the thermal path from the exposed pad has to be real, especially at 60 MHz with the analog blocks running.

The analog section is modest but well matched to the job. One 12 bit converter at 4.6 MSPS over 16 channels, a 216.67 ns conversion time and an internal temperature sensor cover motor current sensing, bus voltage, an NTC and a couple of housekeeping channels. Two comparators with an internal reference feed the trip zone directly, so an over current can shut the PWM off without the CPU being involved, which is the behaviour a safety review will ask about.

The control law accelerator is what separates this family from the older fixed point parts. It runs floating point code independently, so the current loop can stay in the accelerator while the CPU handles state machine, communications and housekeeping. A 60 MHz core that also has to run a fast current loop in software will not close the loop at the rate a modern motor drive expects, and moving that loop into the accelerator is the whole point of the part.

Flash at 128 KB sounds generous until the code includes a field update path. A bootloader with a dual image, the vendor libraries and a small file system consume a good part of it, and the sector split of eight 8K word blocks constrains how the images are placed. The flash API from the vendor has to be run from RAM, and its timing has to be checked against the clock, which is a step that gets skipped on a board where the code was ported from a 100 MHz device.

  • The 80 pin body provides 14 PWM channels, so a three phase inverter plus a power factor stage plus a spare fits, while the 64 pin body tops out lower.
  • One encoder module is enough for a single axis, so a two axis product needs to count on capture inputs for the second axis.
  • The internal oscillator removes the crystal, but the frequency tolerance then has to be checked against the communications baud rate budget.
  • The one time programmable memory is the right place for a calibration record and a serial number, and it is readable from the boot code without an external memory.
  • The 119 piece tray is the published packing, so a small build takes a full tray and the balance has to be stored dry.

Which projects this part fits

Appliance and pump drives, fan and compressor controllers, digital power supplies, LED drivers, solar micro inverters, battery chargers and small industrial automation modules fit this part. It is also a common choice where a product is moving off an older fixed point C2000 device and wants to keep the same tool chain and the same analog front end while removing the second rail. Our MCU cross reference lists what we hold against this family, and the date code management page covers how a tray based part is stored and rotated on the line.

Questions that come up before a purchase order is released

Does this part have a floating point unit on the main core?

No. The C28x core is fixed point with 16 by 16 and 32 by 32 multiply accumulate instructions, and the floating point work is done in the control law accelerator. Code that assumes a hardware floating point unit on the main core will run, but it will run slowly, which is the difference between this part and the F2837x family.

What is the difference between this and the F28034?

The two share the body and the pinout, and the flash and RAM differ. The vendor document states the F28035 and F28034 carry 64K words of flash, while the smaller members of the family carry 32K or 16K. A build that swaps between them has to check the linker script and the sector use, not just the part number.

Can the board be built without a crystal?

Yes. The device has two internal zero pin oscillators and an on chip crystal oscillator, so a crystal is optional. The internal oscillator is adequate for a motor loop and for most serial links, but the baud rate error budget has to be calculated before a product relies on it for a long cable run.

How SUPERB handles this line

We supply the TMS320F28035PNT in original trays with date code and lot traceability, and we confirm the temperature grade against the reel label rather than against the first row of the addendum. If the product is moving from an older C2000 device, send the current peripheral list and the memory map and we will check that the 80 pin body covers it before the board is changed. Start from the MCU cross reference page if the question is availability rather than pin count.