Contact Us

TMS320F28027PTQR

Brand: Texas Instruments
Texas Instruments TMS320F28027PTQR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320F28027PTQR — Power Management & Signal Chain | Superb Automation

TMS320F28027PTQR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320F28027PTQR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320F28027PTQR Piccolo controller at 60 MHz in the 48 pin LQFP, automotive grade

The TMS320F28027PTQR is the 48 pin LQFP member of the F2802x Piccolo line, a 32 bit real time controller that runs the C28x core at 60 MHz with a 16.67 ns cycle. It carries 32K words of flash, which is 64 KB, in four sectors of 8K words, plus 6K words of static RAM, 1K word of one time programmable memory and an 8K word boot ROM. The whole device runs from a single 3.3 V rail through an internal regulator and needs no power sequencing, which removes a supply supervisor, a sequencing circuit and a set of routing rules from a small board.

For a 48 pin body the peripheral count is generous: a 12 bit converter with thirteen channels and a 216.67 ns conversion time, seven enhanced PWM outputs with high resolution extension, one comparator with an internal 10 bit reference, an on chip temperature sensor, one UART, one SPI port, one I2C bus, a capture module and a watchdog with missing clock detection. The automotive Q letter in the code puts the part at minus 40 to plus 125 C with AEC-Q100 qualification, and the R letter puts it on a 1000 piece reel for a line that feeds from tape.

Key parameters taken from the TMS320F28027PTQR document

CoreTMS320C28x, 32 bit, 60 MHz, 16.67 ns cycle, fixed point with 16 by 16 and 32 by 32 MAC
Flash32K by 16 words, 64 KB, four sectors of 8K words
RAM and boot6K by 16 words of SARAM, 1K by 16 OTP, 8K by 16 boot ROM
Supplysingle 3.3 V rail, internal regulator for the core, no power sequencing required, integrated power on and brown out resets
Converter12 bit, thirteen channels, 216.67 ns conversion, two sample and hold circuits
Comparatorone comparator with an internal 10 bit reference and a programmable filter
PWMseven ePWM outputs with high resolution extension, independent 16 bit timer in each module
Captureone eCAP module, three 32 bit CPU timers
Serialone SCI, one SPI with a four level FIFO, one I2C
GPIO22 shared pins with input filtering on the 48 pin body
Clocktwo internal zero pin oscillators, on chip crystal oscillator, external clock input, missing clock detection
Security128 bit key and lock protecting the secure memory blocks
TemperatureQ grade, minus 40 to plus 125 C, AEC-Q100 qualified
Order code factsTMS320F28027PTQR, LQFP PT 48 pins, 1000 pieces on a large reel, NIPDAU, Level-2-260C-1 YEAR, minus 40 to plus 125 C, Active

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The single rail is the reason this part wins small boards. With no sequencing requirement there is no order to get wrong, no supervisor to hold a core rail down, and no risk of a brown out that resets one rail before the other. The internal regulator still needs its decoupling at the pin and a ground plane under the device, and the document prints the capacitor values and the placement note. A board that copies a two rail circuit onto this part and leaves the regulator pin floating will run warm and reset intermittently, which is a fault that a bench test at room temperature rarely catches.

Thirty two kilowords of flash is small once a bootloader and a communication stack are in the image, and the four 8K word sectors make the arithmetic brutal: a parameter record that needs one sector on its own costs a quarter of the array. The practical split is a bootloader in the first sector, the application in the next two, and the last sector kept for calibration data or for a recovery image. Read the map file before the first build, not after the image stops fitting, because at that point the only remaining option is to move to a larger member with a different pin count.

The converter is fast for a device in this class at 216.67 ns, and the two sample and hold circuits can sample two channels at the same instant, which is what a current sense pair in a three phase stage needs. Thirteen channels on a 48 pin body means the analog pins are shared with digital functions, so the pin mux table decides which channels are actually available once the serial ports and the PWM outputs are assigned. The first step in any port to this part is to write the pin assignment table from the document rather than from the board drawing, because the two disagree more often than expected.

The Q letter adds cost and it also adds a handling rule: level 2 moisture class with a one year floor life. That is more forgiving than the level 3 parts in this family and it still requires the bag to be opened at the line and the open time to be recorded. The temperature range of minus 40 to plus 125 C is the junction range, and a 48 pin LQFP on a small board with a power stage close by will run hot, so the thermal pad and the copper under the device decide how much of that range is usable in a sealed enclosure.

  • Core rail at the pin from the internal regulator, and the regulator decoupling exactly as printed.
  • Converter accuracy at both ends of the range with the internal reference and with the real sensor connected.
  • Simultaneous sampling of the two current channels, checked for skew rather than for amplitude.
  • High resolution duty linearity at low duty, where a motor drive spends its time at light load.
  • Brown out behaviour: a slow supply ramp should reset cleanly and not leave the part in a partial state.
  • Die temperature at full load inside the enclosure, compared against the 125 C grade with margin.

Which projects this part fits

This device is the control block in appliance and small motor drives, air conditioner outdoor units, textile machinery, micro inverters, AC drive power stages, BLDC motor control for fans and pumps, industrial AC to DC supplies, three phase UPS modules, merchant DC to DC converters, network and server power supplies and telecom rectifiers. For SUPERB customers it usually appears as the controller on a small power board that also carries a gate driver, a shunt amplifier and a handful of passives, which is exactly the kind of board we assemble and test as a unit rather than as a kit of parts.

Questions that come up before a purchase order is released

Is this part really a single supply device?

Yes. An internal regulator generates the core rail from the 3.3 V input and the document states that no power sequencing is required. The conditions are the decoupling printed for the regulator pin and a clean 3.3 V input. A board that feeds the regulator pin from a noisy intermediate rail will show resets that look like firmware faults.

How does the Q grade differ from the plain part?

Qualification and temperature. The Q letter is AEC-Q100 at minus 40 to plus 125 C with a level 2 moisture class, while the plain rows of the same body carry a narrower grade. The silicon is the same core, so the difference is what the vendor guarantees and how the part is handled, and a product that does not need the automotive paper can use the plain row and save the qualification cost.

Why is the flash only 32K words?

Because the family is built for a single control loop, not for an application processor. A motor control image with a serial protocol and a calibration table typically lands between 12K and 24K words, which leaves room, and a product that needs more should move to the next member with 64K words rather than compress the code. The document prints the flash options across the family in one table.

Can the internal temperature sensor be used for product level thermal protection?

It can be used for a trend, not for an absolute reading, because it measures the die and its accuracy is not specified to the same level as the converter channels. The document describes it as an on chip sensor with a known slope. For a protection threshold that has to hold over temperature and lot, an external sensor or a thermistor in the divider is the safer route.

What does the R letter mean on this order code?

It is the large reel option, printed as 1000 pieces on a large reel for this body. The same body also appears in a 250 piece JEDEC tray under a different suffix, so a prototype build can be served from a tray while production runs from the reel, and the two arrive with different moisture labels.

How SUPERB handles this line

We supply the TMS320F28027PTQR on the 1000 piece reel with the automotive letter and the moisture class verified on the label, and we can split a reel for a prototype quantity without breaking the traceability of the rest. For customers building a power board around this device we quote the gate driver, the shunt amplifier and the passives on the same order, because the pin assignment on a 48 pin body is decided by the whole set and not by the controller alone. The MCU cross reference page lists the members of the family with their flash and pin options, and the kitting service page covers the case where the controller and its surrounding parts have to arrive as one kit.