Contact Us

TMP1075DSGR

Brand: Texas Instruments
Texas Instruments TMP1075DSGR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMP1075DSGR — Power Management & Signal Chain | Superb Automation

TMP1075DSGR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMP1075DSGR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMP1075DSGR twelve bit digital temperature sensor in a two millimetre WSON body

The TMP1075DSGR is the same silicon as the SOIC member of this family in a two by two millimetre WSON body with eight pins. It measures minus 55 to plus 125 C at twelve bit resolution with a quarter degree per code, talks SMBus and I2C, offers thirty two addresses and an open drain alert, and draws ten microamps typical at the default conversion rate. The reason to choose this body is board area: the die is identical and the register map is identical, and the package footprint, the thermal path and the assembly process are what change.

The accuracy window printed for the WSON body is narrower at the warm end than the SOIC and VSSOP bodies: plus or minus one degree maximum applies from minus 40 to plus 75 C rather than to plus 110 C, with plus or minus two degrees maximum across the full range. That is a package effect, not a silicon selection, and it appears in the device comparison table of the document. A product that needs one degree of accuracy at 100 C has to use the SOIC or the VSSOP body, or accept the wider number and document it.

Key parameters taken from the TMP1075DSGR document

Rangeminus 55 to plus 125 C, twelve bit resolution, 0.0625 C per code
Accuracyplus or minus 0.25 C typical, plus or minus 1 C maximum from minus 40 to plus 75 C, plus or minus 2 C maximum over the full range
Supply1.7 to 5.5 V, reading independent of the supply
InterfaceSMBus and I2C, thirty two addresses, SMBus reset, alert output, I3C mixed fast mode compatible
Conversion27.5 ms default, also 55, 110 and 220 ms, one shot in 4.5 to 7 ms
Current10 microamps typical at the default rate, 2.7 microamps at the slowest rate, 52 microamps during conversion, 0.37 microamps shutdown
Alertopen drain, programmable limit and fault queue, 0.4 V maximum low level at 3 mA
CompatibilityLM75 and TMP75 register map, same firmware interface as the SOIC member
PackageWSON, body DSG, eight pins, 2.00 by 2.00 mm
Thermal notethe smaller body follows the board temperature faster and has less copper to spread heat
Order code factsTMP1075DSGR, WSON DSG 8 pins, 3000 pieces on a large reel, NIPDAU, markings vary by row, Active; moisture class rows disagree inside the document

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

A two by two millimetre body has almost no thermal mass, so what it measures is the copper it is soldered to. That is an advantage when the sensor is placed next to a processor and a disadvantage when it is placed near a power component, because the reading follows the nearest heat source rather than the average of the board. The document prints the thermal resistance and the response, and the placement decision belongs in the mechanical review of the board rather than in the electrical one. A sensor on the far side of a plane from the heat source reports the plane, not the device.

The ground pad under a WSON body is the thermal path and the electrical reference at the same time. A pad with voids changes both, and the change shows up as a slow reading rather than as a fault. The reflow profile and the stencil aperture for that pad decide the result, and the first article should include an x ray of the pad area on every new assembly source. On a part whose whole function is temperature, a voided pad is a calibration error that no software can correct.

The moisture class printed in the document for this string is not consistent across rows. The plain row shows level 1 with an unlimited floor life, and the A row of the same string shows level 2 with a one year floor life, while the automotive G4 row shows level 2 with a narrower temperature range. Because the difference decides whether a bake is needed, the carton label is the authority, and a production line that plans for level 1 and receives a level 2 bag has a handling step it did not schedule.

The accuracy window is the one number that separates this body from its siblings, and it is easy to miss because the part number is the same apart from two letters. A product that needs one degree at 100 C cannot use this body, and a product that only needs one degree at 70 C can. The document prints the comparison table per body, and a substitution from the SOIC to the WSON in a mature product should be checked against that table before the first build, not after a customer asks why the reported temperature moved.

  • Reading at three temperatures with the reference probe touching the same copper, not the same air.
  • X ray of the ground pad on the first article of every assembly lot, since the pad is the thermal path.
  • Accuracy at the top of the one degree window and above it, to see where the printed boundary actually falls.
  • Alert behaviour with the fault queue the product uses, exercised by heating the board rather than the air.
  • Supply current at the conversion rate in use, and leakage of the alert pull up when the output is low.
  • Moisture class and floor life from the carton label, recorded in the traveler before the bag is opened.

Which projects this part fits

This body is used where the board has no room for an eight pin SOIC: wearable and handheld instruments, dense line cards, camera modules, battery packs, small sensors nodes, medical patches and any product where the sensor sits within a few millimetres of the device it protects. It carries the same register map as the larger bodies, so a product can move from one to the other without a firmware change, which makes it a practical second source inside a single product.

Questions that come up before a purchase order is released

Is the firmware identical to the SOIC part?

Yes, the register map and the interface are the same, and the resolution and the conversion rate settings are the same. The address straps are the same three pins. A product can move between the bodies with a build change only, provided the accuracy window still meets the specification, which is the one thing that differs.

Why is the accuracy window shorter than on the SOIC part?

The document prints one degree maximum from minus 40 to plus 75 C for this body against plus 110 C for the SOIC and VSSOP bodies, with the same two degree maximum over the full range. The difference is attributed to the package. A product that needs the tighter window at high temperature should use the larger body rather than assume the die is the same and the number follows.

Does the WSON body need a different stencil?

Yes, the pad geometry and the aperture for the thermal pad are different from the SOIC land pattern, and the paste volume on the thermal pad controls the void rate. The vendor prints a recommended land pattern in the package section, and the assembly should start from that pattern rather than from a scaled version of an existing footprint.

Which moisture class should the receiving inspection expect?

The document prints level 1 on the plain row and level 2 on the A row of the same string, so the answer depends on the lot and the label. For planning, treat it as level 2 and add the bake step only if the label says so. Recording the label value per lot is the only way to keep the reflow schedule and the handling record consistent.

Can this part be used in a reflow process with other lead free parts?

Yes, the finish printed for the body is NIPDAU and the part is RoHS compliant, so it shares the standard lead free profile. The limit is the small body and the thermal pad, which need a profile that does not overshoot on the small mass while still wetting the pad, and that is a profile measured on the actual board rather than taken from a generic chart.

How SUPERB handles this line

We supply the TMP1075DSGR on the original 3000 piece reel with date code and lot traceability, and we check the moisture label and the marking per lot because the same string appears with more than one row in the document. The body is small enough that the first article should include an x ray of the thermal pad, and we keep that record with the build. The power management cross reference page lists the parts that share this bus, and the supplier quality audit page describes how we qualify an assembly source for a package this small.