TLC6C5912QDWRQ1
Product Specifications
TLC6C5912QDWRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The TLC6C5912QDWRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TLC6C5912QDWRQ1: twelve channel shift register LED driver in a 20 pin wide SOIC body, automotive qualified
TLC6C5912QDWRQ1 is the wide body SOIC version of the twelve bit LED shift register, chosen where the thermal path matters more than board area in a SOIC body of 20 pins. The DW suffix is the 20 pin wide body SOIC, and the Q1 marking puts the full part number on the package rather than the short code used on the TSSOP. The die is the same twelve bit shift register with 40 V low side DMOS outputs, and the temperature grade is the automotive one from minus 40 to 125 C. The wide body carries a junction to ambient resistance of 81.2 degrees per watt against 114.8 for the TSSOP, which is 40 percent more heat out of the same silicon.
Order code and package
| Order code | TLC6C5912QDWRQ1 |
| Function | 12 bit serial in parallel out shift register, low side DMOS sink outputs |
| Package | SOIC wide body, 20 pins, body code DW, tape and reel, 2000 per reel |
| Device marking | TLC6C5912 |
| Qualification | AEC-Q100 grade 1, automotive order code |
| Logic supply | 3 to 5.5 V, 8 V absolute maximum |
| Drain rating | 40 V operating, 42 V absolute maximum |
| Output current | 50 mA continuous per channel at 5 V |
| Thermal resistance | 81.2 degrees per watt, DW body |
| Clock frequency | 10 MHz serial clock |
| Temperature range | minus 40 to 125 C, grade 1 |
| Datasheet | SLIS141C, revision of July 2016 |
Electrical parameters that decide the application
| On resistance, 5 V, 25 C | 6 ohm typical single channel, 9.6 maximum all channels |
| On resistance, 3.3 V, 25 C | 7.9 ohm typical single channel, 12.3 maximum all channels |
| On resistance, 5 V, 125 C | 9.1 ohm typical single channel, 14.5 maximum all channels |
| On resistance, 3.3 V, 125 C | 11.6 ohm typical single channel, 18.2 maximum all channels |
| Junction to case, top | 45.4 degrees per watt |
| Junction to board | 49.1 degrees per watt |
| Output enable delay | 210 nanoseconds low to high, 75 nanoseconds high to low |
| Cascade delay | 35 nanoseconds from SRCK falling to SER OUT |
| Drain rise and fall | 250 and 200 nanoseconds |
| Logic supply current | 0.1 microamp off, 170 microamps maximum all on |
| Off state leakage | 0.1 microamp at 25 C, 0.3 maximum at 125 C |
| Thermal shutdown | 150 to 200 C trip, 15 C hysteresis |
Points to check before this part goes on a BOM
The thermal advantage is the reason to pick this body, and it is measurable. Twelve channels at 50 mA into a 14.5 ohm maximum on resistance dissipate 435 mW, which is a 35 degree rise in the wide SOIC against 50 degrees in the TSSOP. At 85 C ambient the junction lands at 120 C here and 135 C there, and the 150 C shutdown floor is the difference between a margin and a flicker.
Junction to case is 45.4 degrees per watt and junction to board 49.1, so the copper under the body is the second thermal path. A wide SOIC with 1.27 mm pitch has room for a ground pour under the package, and that pour is worth more than a bigger package with a thin board under it.
The lead frame is the electrical return for every channel. Twelve sinks at 50 mA sum to 600 mA through the ground pins, and the on resistance figures already include the internal connection but not the board trace. A 0.1 ohm trace resistance at 600 mA is another 60 mV of common drop that shows up as brightness variation along the device.
Output enable delay is asymmetric: 210 nanoseconds to turn on and 75 nanoseconds to turn off, and the drain edges are 250 and 200 nanoseconds. That half microsecond is what a scanning multiplexer has to fit inside its blanking window, and it is the reason a 1 kHz scan rate with twelve channels is comfortable while a 20 kHz scan rate is not.
The device marking differs from the TSSOP order codes because the wider body has room for the full string. In a mixed inventory that marking is the only way to tell which body a reel holds once the label has been read, so receiving inspection should read the mark and not just the barcode.
Off state leakage of 0.3 microamp maximum at 125 C is small but not zero, and a channel that is off in a dark cluster is still sinking that much. Across twelve channels at 125 C the total is under 4 microamps, which matters only for a battery backed lamp that has to stay dark for months.
Where this order code fits
Instrument clusters and body control modules that already run a wide SOIC footprint, and any board where the twelve channels are driven near their 50 mA limit for long periods. The 1.27 mm lead pitch also suits assemblies that are reworked by hand, which is why aftermarket cluster repair and low volume automotive instrumentation still specify this body over the smaller TSSOP. Boards comparing it with a neighbouring part start from our Power Management Cross Reference page, and boards replacing a part that has gone end of life start from the Incoming Inspection Plan page.
Questions buyers ask
Why choose this body over the TSSOP? Thermal headroom and rework. The wide SOIC is 81.2 degrees per watt against 114.8, which is 15 degrees less rise at full load, and its 1.27 mm pitch suits hand rework.
Are the electrical limits the same as the other Q1 order codes? Yes. The die, the 40 V drain rating, the 50 mA continuous current and the shift register timing are shared, only the package and its thermal figures change.
Can the part be used at 125 C with all channels on? It can, inside the thermal budget. Twelve channels at 50 mA is 435 mW and a 35 degree rise in this body, so a 125 C ambient would put the junction at 160 C, above the shutdown floor; the current has to come down as the ambient rises.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.