TLC339ID
Product Specifications
TLC339ID
Texas Instruments — Power Management & Signal Chain
Product Overview
The TLC339ID from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TLC339ID: quad micropower comparator in a 14 pin SOIC tube, industrial temperature, obsolete order code
TLC339ID is the industrial temperature quad comparator in tube packing, and the order code TI now lists as obsolete while the reel version remains active in a SOIC body of 14 pins. The I suffix is the industrial grade from minus 40 to 85 C, and the plain D suffix is the 14 pin SOIC in tubes. In the current packaging addendum this exact order code is listed as obsolete with no quantity and a call for stock, while TLC339IDR on the same die and in the same body is active on a 2500 piece reel. Electrically it is the four comparator part at 44 microamps typical and 2.5 microseconds at 5 mV overdrive.
Order code and package
| Order code | TLC339ID |
| Function | quad differential comparator, open drain output |
| Package | SOIC, 14 pins, body code D, tube |
| Lifecycle | obsolete in the current packaging addendum |
| Active alternative | TLC339IDR, same die and body, 2500 piece reel |
| Supply range | 3 to 16 V, 18 V absolute maximum |
| Supply current | 44 microamps typical, 80 maximum at 25 C |
| Response time | 2.5 microseconds at 5 mV overdrive, 4.5 at 2 mV |
| Input offset voltage | 1.4 mV typical, 5 mV maximum at 25 C, 7 over the range |
| Common mode range | 0 to VDD minus 1 V, VDD minus 1.5 V over temperature |
| Temperature range | minus 40 to 85 C, I suffix |
| Datasheet | SLCS119B, revision of December 2006 |
Electrical parameters that decide the application
| Input offset voltage | 1.4 mV typical, 5 mV maximum at 25 C, 7 mV from minus 40 to 85 C |
| Input bias current | 5 picoamps typical at 25 C |
| Input offset current | 1 picoamp typical |
| Common mode rejection | 84 dB typical |
| Supply rejection | 85 dB typical from 5 to 10 V |
| Low output level | 300 mV typical, 400 maximum at 6 mA |
| High level leakage | 0.8 nanoamps typical at 5 V |
| Supply current over temperature | 100 microamps maximum for four comparators |
| Propagation at 2 mV overdrive | 4.5 microseconds typical |
| Propagation at 10 mV overdrive | 1.7 microseconds typical |
| Output current rating | 20 mA absolute maximum per output |
| Offset stability | 0.23 microvolts per month including the first 30 days |
Points to check before this part goes on a BOM
The obsolescence here is in the packing, not in the silicon. TLC339ID is the tube packed SOIC and it is listed as obsolete, while TLC339IDR is the same die in the same body on a 2500 piece reel and is listed as active. A BOM that calls out the tube code for a new build is asking for a shortage that has a one character answer.
The 7 mV full range offset over minus 40 to 85 C is 2 mV more than the 25 C limit. Over 125 degrees of span that is 16 microvolts per degree, which is consistent with the 0.23 microvolt per month stability figure being a long term term and not a temperature term; the two should not be added as if they were the same thing.
Industrial users should note that the same family offers the Q grade at minus 40 to 125 C with the same 5 mV offset at 25 C. Where the ambient at the board reaches 100 C, the I grade at 85 C is the wrong code and the drop in replacement is a different suffix in the same package.
The input common mode window loses half a volt at temperature: VDD minus 1 V at 25 C becomes VDD minus 1.5 V across the range. On a 5 V rail the usable top of the window is 3.5 V, which is why rail referenced thresholds on this part are usually divided down rather than taken from the supply.
Leakage at the input pins grows with temperature and is specified at 25 C only in the table used here. The family figure is 0.6 nanoamps at 70 C and it continues upward, so a 1 megohm threshold network at 85 C is operating on a bias current the table does not bound at that temperature.
The output is open drain with a 20 mA absolute maximum per pin. Four outputs tied to one pull-up at 15 mA each is 60 mA through the shared node and 24 mA through the common ground pin, which is the practical ceiling of the package rather than the per pin figure.
The four sections share a die, so their offsets track with process rather than scattering. On a pack monitor that means the four thresholds move together with temperature, which preserves the balance between channels even though every absolute threshold shifts by up to 2 mV. The practical consequence is that a guard band sized on one channel also protects the other three.
Where this order code fits
Existing industrial boards that were released with tube packed SOIC parts: process controllers, power supplies with four rail monitors, and instrument front ends that were built before the reel became the only packing offered. The function is identical to the active reel code, so the practical question for a buyer is packing and availability rather than performance. Boards comparing it with a neighbouring part start from our Obsolete Part Cross Reference Hub page, and boards replacing a part that has gone end of life start from the Component Obsolescence Management page.
Questions buyers ask
Is this part discontinued? The tube packed SOIC order code is listed as obsolete in the current packaging addendum. The reel packed version on the same die, TLC339IDR, is active.
Is the obsolete code electrically different? No. Same die, same 14 pin body, same 5 mV offset and same 44 microamp supply current. Only the packing and the lifecycle status differ.
What if the ambient reaches 100 C? The I grade stops at 85 C. The Q grade in the same family covers minus 40 to 125 C with the same 25 C offset limit.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.