Contact Us

ISO7731FDBQR

Brand: Texas Instruments
Texas Instruments ISO7731FDBQR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ISO7731FDBQR — Power Management & Signal Chain | Superb Automation

ISO7731FDBQR

Texas Instruments — Power Management & Signal Chain

Product Overview

The ISO7731FDBQR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ISO7731FDBQR: two channels out, one back, 100 Mbps

The ISO7731FDBQR is a three channel digital isolator with two forward and one reverse channel, a low default state and a 100 Mbps rating. It sits in the ISO773x family, whose members differ only in the direction map and the default. Three channels in a 16 pin body cover the common field pattern: a clock and a data line going out, and a fault or acknowledge coming back.

The F letter sets the default low on loss of input power or input signal. The plain member holds the outputs high. This is the setting that decides how a receiver behaves when the isolated side loses its supply, and it is invisible on the label unless the full string is printed on the order.

Isolation depends on the body. The shrink SSOP body carries 3000 VRMS and 4242 VPK, while the wide SOIC body of the same family carries 5000 VRMS and 8000 VPK. Both are certified to the same standards, and the choice between them is a creepage and a board area question rather than an electrical one. Propagation delay is 6 ns minimum, 11 ns typical and 18.5 ns maximum at 5 V, and the supply current is 1.8 mA typical on the input side at 1 Mbps.

Key data for the ISO7731FDBQR

ChannelsThree, two forward and one reverse, with an output enable pin
Data rate100 Mbps maximum specified
Isolation in this bodySSOP DBQ gives 3000 VRMS and 4242 VPK, the wide SOIC body of the same family gives 5000 VRMS and 8000 VPK
Supply2.25 V to 5.5 V on each side, 2.25 V to 5.5 V level translation
TimingPropagation delay 6 ns minimum, 11 ns typical and 18.5 ns maximum at 5 V
ImmunityCMTI 100 kV per microsecond typical and 85 kV per microsecond minimum
Default stateOutput low on loss of input power or signal, the F variant

Body, packing and a packaging note

BodySSOP DBQ, 16 pins, 4.9 mm by 3.9 mm
Packing2500 pieces on a large reel on the plain and the A row
Addendum mismatchThe A row of this string prints SOIC DW at 2000 pieces while the plain row prints SSOP DBQ at 2500, so the package on the row a buyer picks can disagree with the label
FinishNIPDAU, moisture level 2, 260 C peak, one year floor life
TemperatureMinus 55 C to plus 125 C

The package mismatch is the thing to watch

In the current addendum the plain row of this string reads SSOP DBQ at 2500 pieces, while the A row of the same string reads SOIC DW at 2000 pieces. Two different bodies cannot share one order string in reality, so one of the two rows carries a package field that does not match the part it describes. A buyer who orders by string alone has a one in two chance of receiving the body the board was drawn for.

The practical fix is to name the body on the purchase order in words, for example SSOP 16 pin on a 2500 piece reel, and to compare the first article against that statement. A 3000 VRMS shrink body and a 5000 VRMS wide body are both valid parts, but only one of them fits a given land pattern, and only one of them satisfies a given creepage requirement at the applied working voltage.

Where three channels with a return path are used

Field IO blocks, motor control interfaces and instrument front ends all use this map. Two forward channels carry a clock and data or a pair of commands, and the reverse channel carries the response. Because the reverse channel is on the other side of the barrier, its delay and its default are set by the same die and the same order code.

Our CAN bus transceiver selection page covers how an isolated transceiver pair is put together around a digital isolator, and the vendor consolidation page is useful when a board carries several isolator strings that could be reduced to two.

Questions we get on this code

Buyers ask whether the enable pin can be used to save power. It puts the outputs into a high impedance state, and the barrier keeps running, so the saving is small. If standby current matters, the supply has to be gated rather than the enable pin toggled.

The second question is whether the 3000 VRMS shrink body is acceptable for a mains referenced product. That depends on the working voltage named on the certificate and on the creepage the board provides. The wide body is the simpler answer where the board has room, and the shrink body is the answer where the board does not, as long as the certificate covers the applied voltage.