Contact Us

ISO6721FBDR

Brand: Texas Instruments
Texas Instruments ISO6721FBDR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ISO6721FBDR — Power Management & Signal Chain | Superb Automation

ISO6721FBDR

Texas Instruments — Power Management & Signal Chain

Product Overview

The ISO6721FBDR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ISO6721FBDR: Two Channels, One Each Way, in an Eight-Pin Narrow Body

ISO6721FBDR is a dual-channel basic digital isolator in a SOIC body of 8 pins. It puts one forward and one reverse channel into an eight-pin narrow SOIC with a 3000 VRMS barrier, a 450 VRMS working voltage and an 11 ns typical delay.

Order code and package

Ordering stringISO6721FBDR
PackageSOIC, 8 pins, D body, narrow
CarrierTape and reel, 3000 pieces, 330 mm reel, 12.4 mm tape, pocket 6.5 by 5.4 by 2.0 mm, Q1
Supplies1.71 V to 1.89 V and 2.25 V to 5.5 V, each side independent
Temperature rangeminus 40 to plus 125 degrees Celsius
Channel directionOne forward, one reverse
Default stateOutput low, the FB suffix

Electrical parameters that decide the application

Data rate50 Mbps
Isolation ratingUp to 3000 VRMS per UL 1577 on the D package
Working voltage450 VRMS
Common-mode transient immunityplus or minus 150 kV per microsecond typical
Propagation delay11 ns typical
Supply current1.8 mA per channel typical at 1 Mbps
Level translation1.71 V to 5.5 V on either side
Clearance and creepageAbove 4 mm side to side, internal gap above 17 micrometres
Tracking indexAbove 400 V
System-level ESDPlus or minus 8 kV IEC 61000-4-2 contact across the barrier
CertificationsVDE 0884-17, UL 1577, plus TUV, CSA and CQC

Family variants and how they differ

ISO6720BTwo forward channels, default high
ISO6720FBTwo forward channels, default low
ISO6721BOne forward and one reverse, default high
ISO6721FBOne forward and one reverse, default low, the part on this page
ISO6721RBThe R variant, printed with its own rows in the addendum
PackageD 8 only for this family, the narrow body is what sets the 4 mm clearance and the 3000 VRMS rating
Qualified versionsISO6720-Q1, ISO6721-Q1 and ISO6721R-Q1 are the automotive members

Points to check before this part goes on a BOM

One each way is the smallest useful isolation channel count.A single signal that has to cross a barrier and come back, such as a fault line and its acknowledge, needs exactly two channels. The eight-pin body is the smallest package in which TI puts them, and the pad area saved against a 16-pin part is the reason it exists.

3000 VRMS is a basic insulation rating.The working voltage printed beside it is 450 VRMS. That is a functional or basic level for a 400 V class system, not a reinforced barrier for a 690 V drive. Comparing this part against ISO674x on the 3000 against 5000 VRMS headline alone hides the working voltage gap of 450 against 1500 VRMS.

The 4 mm clearance is the constraint that reaches the board.The isolator's own clearance is above 4 mm, and the pads and traces on both sides must not reduce it. A narrow body with a ground pour that comes within 2 mm of the barrier defeats the rating, and that is a board rule rather than a component rule.

1.8 mA per channel at 1 Mbps against 50 Mbps capability.The current figure is quoted at 1 Mbps. At the top rate the dynamic current dominates and the isolated supply has to be sized from the switching rows, not from the quiescent number.

The FB suffix carries a real consequence.Both channels default low when the input side loses power. On a two-channel part where one channel is a return path, a low default can be read as a valid acknowledge by the controller, so the firmware has to treat the first frame after power-up as suspect.

3000 pieces per reel changes the minimum buy.The eight-pin body ships 3000 to a 330 mm reel, so a small build of 500 pieces buys a partial reel or a cut tape, and the price per piece at that quantity is not the reel price. That is a purchasing fact rather than a technical one, and it is the reason this part is often kitted rather than bought in reels.

Where an eight-pin isolator fits

A shunt-based current sense amplifier on the high side sends one analog-derived digital line back, and the controller sends one calibration or range line out. Two channels in an eight-pin body place that pair next to the shunt without a 16-pin part and its extra clearance.

The same shape serves a isolated fault and reset pair on a gate driver module, where the forward channel carries the fault and the reverse carries the reset.

What the VDE and UL difference means in a file

The part carries UL 1577 recognition at 3000 VRMS and a VDE 0884-17 certificate. For a product file, the UL number covers the component rating and the VDE certificate covers the insulation coordination under IEC 60664-1, and the two answer different questions in a type test report.

A reviewer asking for reinforced insulation will not accept this part on the UL figure alone, because 3000 VRMS with a 450 VRMS working voltage is a basic insulation claim in the VDE table.

Comparing this part against a 5000 VRMS sibling before the board is fixed

The eight-pin body reaches 3000 VRMS and 450 VRMS working, the sixteen-pin reinforced bodies reach 5000 VRMS and 1500 VRMS working. Both are printed as isolation ratings and only one of them is the number that matters for a continuous bus voltage. A 400 V AC drive bus with ringing touches about 700 V peak, which is already outside the 450 VRMS window and comfortably inside the 1500 VRMS one.

That is why the package decision has to be made before the board is committed. Moving from the eight-pin body to the sixteen-pin body later costs the area, the clearance around the barrier and the isolated supply that feeds the second side, and none of those can be recovered by changing a resistor.

What does carry over is the function. Both bodies carry two channels, both run at 50 Mbps, both hold 11 ns of typical delay and both accept 1.71 V to 5.5 V on either side, so the change between them is a re-qualification of the insulation rather than a change of behaviour in the signal path. The firmware, the timing budget and the pin functions do not move.

Where this order code fits

Isolated current sense front ends, gate driver fault paths and small sensor interfaces use this part where two signals cross a functional barrier and board area is the binding constraint. Teams comparing it with a neighbouring part start from our Pin to Pin Cross Reference page, and teams replacing a part that has gone end of life start from the Component Lead Time Solutions page.

Questions buyers ask

What does the FB in ISO6721FBDR mean? F is the default-low option and B is the basic isolation option in this family. The part therefore holds both outputs low when the input side loses power.

Can it be used for reinforced insulation? The working voltage is 450 VRMS and the UL rating is 3000 VRMS on the D package, which is a basic insulation claim. A reinforced requirement needs a part with a higher working voltage, such as the ISO674x family at 1500 VRMS.

Are the two sides level translators? Yes. Either side runs from 1.71 V to 1.89 V or 2.25 V to 5.5 V, so a 1.8 V device and a 5 V device can talk across the barrier directly.

How many pieces come on a reel? 3000 on a 330 mm reel with 12.4 mm tape. Smaller quantities arrive as cut tape or partial reels, and the price per piece differs.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.