INA271AIDR
Product Specifications
INA271AIDR
Texas Instruments — Power Management & Signal Chain
Product Overview
The INA271AIDR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
INA271AIDR: unidirectional 80 V monitor with a 20 V/V gain
The INA271AIDR is a voltage output current shunt monitor that measures in one direction only, across a shunt sitting between minus 16 V and plus 80 V of common mode, with a fixed gain of 20 V/V. It runs from a 2.7 V to 18 V supply, draws 700 uA typical, and holds 120 dB of common mode rejection, 0.5 mV of typical offset and 0.2 percent of typical gain error with a 130 kHz bandwidth. The SOIC body has separate filter pins, which is the feature that keeps this part in products that predate the chopper stabilised families.
The unidirectional input is the single most important thing to know about it. A current that reverses, as it does in a battery that both charges and discharges or in a motor that regenerates, drives the output to the rail and stays there. The part is for a rail that only sources current, and there are still plenty of those: a telecom rectifier output, a notebook adapter input, a charger feeding a pack.
Key data for the INA271AIDR
| Direction | Unidirectional measurement, minus 16 V to 80 V common mode, so a reverse current reads as the output rail |
| Gain | 20 V/V fixed; the same family offers 14 V/V as the INA270 for a slightly wider input window |
| Accuracy | Offset 0.5 mV typical, offset drift 2.5 uV per degree typical, gain error 0.2 percent typical, gain drift 50 ppm per degree maximum |
| Rejection | 120 dB common mode rejection, adequate for a DC rail and not for a switching one |
| Speed | 130 kHz bandwidth with a 5 pF load, which is enough for a current control loop and not for an overcurrent trip |
| Supply | 2.7 V to 18 V, 700 uA typical and 900 uA maximum quiescent, minus 40 C to 125 C |
Body, marking and reel data
| Body | D, 8 pin SOIC at 4.9 mm by 3.91 mm, with filter pins for an external RC on the input |
| Reel | 2500 pieces on a large reel for the reel row, and 75 pieces in a tube for the plain D row |
| Finish | NIPDAU at moisture level 2 with a one year floor life |
| Marking | I271 on the top side, sharing the family name with the 14 V/V INA270 |
| Filtering | The input pins are brought out separately so an RC can be added without a second amplifier stage |
Where an older unidirectional part still earns its place
Power management, automotive, telecom equipment, notebooks, battery chargers and cell phones are the listed applications. All of them are DC rails where the current flows one way and the measurement feeds a slow loop, and in that setting the 120 dB rejection and the 130 kHz bandwidth are more than enough.
The appeal is the filter pins and the offset. A 0.5 mV typical offset on a 20 V/V gain is 10 mV at the output, which a 10 bit converter reading a 3 V rail resolves easily, and the RC on the input can knock down switching residue that would otherwise need a dedicated filter amplifier. The limits are the unidirectional input and the temperature drift, which is specified as typical rather than maximum on the offset row, so a product that needs a guaranteed number over temperature has to look at the chopper parts instead. Where a line is moving from this part to a bidirectional amplifier, the amplifier cross reference note lists both with their direction, gain and common mode, and our obsolete part replacement note covers the bench checks we run when a legacy amplifier is no longer available.
Buyer questions on the INA271AIDR
What happens if the current reverses? The output saturates at the low rail and the reading is meaningless until the current returns to the intended direction. There is no sign bit and no flag.
Why does the common mode floor sit at minus 16 V? Because the input stage is built to tolerate a negative transient on a supply rail, which is what a charger plugging in or a load disconnecting produces. It is not a bidirectional measurement range.
Does the family have a lower gain option? Yes, the INA270 at 14 V/V, which accepts a slightly larger shunt drop for the same output swing.
Availability and ordering notes
The ordering table for this family prints INA271AIDR with a tube quantity of 75 on the plain row while its .A row prints 2500 pieces on a large reel, which reads as a column alignment issue in the document rather than a packing change. The reel quantity that a production order needs is the 2500 row, and the string should be confirmed against the vendor record before a date is promised. INA270AID, the tube row of the sibling gain, is printed Obsolete while INA270AIDR remains active. Where a long life product still calls this amplifier, the last time buy planning note sets out how we hold a buffer against a future status change.