Contact Us

INA241B3IDDFR

Brand: Texas Instruments
Texas Instruments INA241B3IDDFR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA241B3IDDFR — Power Management & Signal Chain | Superb Automation

INA241B3IDDFR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA241B3IDDFR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA241B3IDDFR: 50 V/V in the 0.1 percent tier

The INA241B3IDDFR is the 50 V/V member of the B accuracy tier in the 8 pin SOT-23-THIN body. The input stage is shared with the rest of the family: minus 5 V to 110 V operational common mode, 120 V survival, 166 dB typical DC rejection and 1.1 MHz of bandwidth at every gain. The B tier carries 150 uV maximum offset with 0.5 uV per degree of drift, and 0.1 percent maximum gain error with 5 ppm per degree.

At 50 V/V the offset is 7.5 mV at the output, which is small against a 1 V signal and large against a 50 mV one. That single sentence is the whole selection rule for this gain: it works where the measured current is a meaningful fraction of full scale and it does not work where the channel has to read a ten to one range without switching a gain.

Key data for the INA241B3IDDFR

Gain50 V/V fixed, one of five gains in the B tier from 10 to 200 V/V
Common modeMinus 5 V to 110 V operational, minus 20 V to 120 V survival, independent of the 2.7 V to 20 V supply
AccuracyOffset 150 uV maximum, 0.5 uV per degree, gain error 0.1 percent maximum, gain drift 5 ppm per degree
Rejection166 dB DC typical, 104 dB at 100 kHz, 89 dB at 1 MHz, with PWM rejection to 125 kHz
Speed1.1 MHz at all gains, 8 V per microsecond slew, settling to 1 percent in 1 us
Supply2.7 V to 20 V, 2.5 mA typical and 3 mA maximum quiescent, minus 40 C to 125 C

Body, marking and reel data

BodyDDF, 8 pin SOT-23-THIN at 2.9 mm by 2.8 mm
Reel3000 pieces on a large reel at moisture level 1, unlimited floor life
FinishNIPDAU plated leads at 260 C reflow capability
Marking2PO3 on this gain and body, with no marker that separates the tier
Tier comparisonThe A3 string in the same package carries 10 uV offset and 0.01 percent gain error

Where the middle gain and the wider window meet

Solenoid drivers and valve controllers built to a cost target are the obvious users. A valve that pulls 4 A to open and 1 A to hold gives a 5 to 1 range, and with a 1 milliohm shunt and 50 V/V the hold current still produces 50 mV, which is more than six times the offset contribution at the output. The controller can tell open from closed and can see a stuck valve without a second sense element.

The limit appears when the same channel has to cover a 20 to 1 range: at the bottom of that range the signal falls to 25 mV and the offset is a third of it, so the reading becomes a threshold with a wide uncertainty band. Two remedies are common. One is a larger shunt, which costs heat and is often impossible in a sealed coil. The other is the A tier, which brings the offset down to 10 uV and makes the same channel usable down to a fifth of the current. Where a line is deciding between the tiers on a range requirement, the amplifier cross reference note tabulates the offset and swing for every gain, and the pin to pin cross reference confirms the two tiers share one footprint so the decision can be revisited late.

Buyer questions on the INA241B3IDDFR

Does the tier affect the common mode range? No. The input stage is the same and the common mode window does not move with the accuracy window.

Can the A and B tiers be mixed in one product family? Only if the host software or the test limits are versioned with the board. Two boards with different tiers look identical and behave differently at low current, which is the kind of difference that survives a functional test and fails in the field.

Is 50 V/V available in the automotive grade? Yes, as a separate qualified family string. The industrial addendum does not list the automotive rows.

Availability and ordering notes

The DDF rows are active at 3000 pieces on a large reel at moisture level 1. Because the marking does not carry the tier and the packing is identical, the reel label is the only control. A distributor that breaks a reel and hands over cut tape removes that control entirely, which is the reason cut tape is not accepted for this family on a production order. Full reels, with the label and the date code intact, are what we ship, and the record travels with the goods on the part cross reference hub entry for this family so a later substitution can be traced.