Contact Us

INA238AIDGST

Brand: Texas Instruments
Texas Instruments INA238AIDGST is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA238AIDGST — Power Management & Signal Chain | Superb Automation

INA238AIDGST

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA238AIDGST from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA238AIDGST: 85 V, 16 bit delta-sigma monitor with a temperature channel

The INA238AIDGST is a 16 bit delta-sigma power monitor that senses current on rails up to 85 V and reports current, bus voltage, power and die temperature. The delta-sigma front end is the reason the accuracy rows look different from the successive approximation monitors in the same family: offset is 5 uV maximum with 0.02 uV per degree of drift, gain error is 0.1 percent maximum with 25 ppm per degree, and common mode rejection is 140 dB minimum. Those are the figures that let a system skip multi-temperature calibration in production, which is a test time saving rather than a datasheet decoration.

The full scale differential window is 163.84 mV or 40.96 mV, giving 12.5 uV or 3.125 uV per step on 16 bits. Input bias current is 2.5 nA maximum, so a shunt of tens of ohms can be used on a microamp rail without the bias term swamping the signal. A separate temperature channel reads the die to within 1 C at 25 C, which is useful when the monitor is the only sensor on a sealed module and the ambient is what the host actually wants to know.

Key data for the INA238AIDGST

Common mode0.3 V to 85 V on the inputs, independent of the supply, with a 0 V to 85 V bus voltage sense input
Front end16 bit delta-sigma converter, 163.84 mV or 40.96 mV full scale, 12.5 uV or 3.125 uV per step
AccuracyOffset 5 uV maximum, offset drift 0.02 uV per degree, gain error 0.1 percent, gain drift 25 ppm per degree
RejectionCommon mode rejection 140 dB minimum, input bias current 2.5 nA maximum
TimingConversion 50 us to 4.12 ms per channel with averaging 1 to 1024, alert response 75 us
Supply2.7 V to 5.5 V, 640 uA typical operating, 5 uA maximum in shutdown, 2.94 MHz I2C with 16 addresses

Body, marking and reel data

BodyDGS, 10 pin VSSOP at 3.00 mm by 4.90 mm, the only body offered for this device
Reel2500 pieces on a large reel for the published R suffix row
FinishThe plain R row is published with a finish column that reads Call TI, while the .A row names a tin finish at moisture level 2 with a one year floor life
Marking238I on the top side, which names the family but not the revision of the die inside
TemperatureMinus 40 C to 125 C, with the power total error figure quoted as 0.7 percent of full scale across that range

Where 85 V and 140 dB belong

DC/DC converters and inverters, industrial battery packs, power over ethernet, telecom equipment and enterprise servers are the listed uses. All of them put the monitor on a rail that switches, so the common mode at the shunt moves by tens of volts in tens of nanoseconds and the reading has to survive it. A 140 dB rejection figure is what keeps that edge from appearing as a current spike in the register, and the delta-sigma modulator with its 50 us minimum conversion is what turns the residue into an averaged number rather than a single sample of the edge.

Two selection points are worth writing down. The first is the full scale split: 40.96 mV is for a shunt sized to a low current rail, 163.84 mV for a high current one, and the choice is a register bit rather than a part number. The second is the thermal path. At 640 uA the device dissipates little, but it sits next to the shunt, and a shunt at 20 A in a 1 milliohm body is already the hottest thing on the board, so the die temperature channel reads the shunt as much as the ambient unless the part is placed away from the copper. Where a line is comparing this monitor against the 16 bit parts with a smaller common mode window, our power management cross reference lines them up on bus range, resolution and bias current.

Buyer questions on the INA238AIDGST

Is there a small reel option? The current addendum publishes the R suffix at 2500 pieces on a large reel and no T row at all, so a small reel quantity for this device has to come from a broken reel or a distributor holding older packing. That is worth knowing before a prototype build is planned around 250 pieces.

Can the temperature channel replace a board sensor? It reads the die, not the air. It is a good proxy for the shunt and the surrounding copper and a poor proxy for ambient inside a closed enclosure.

What does 2.94 MHz buy? It shortens the time to read four registers on a shared bus, which matters when the host is polling several monitors in a loop and the bus is also carrying other traffic.

Availability and ordering notes

The published row for this family is INA238AIDGSR at 2500 pieces on a large reel, with an .A row that names a tin finish and a moisture level 2 floor life. The catalogue string INA238AIDGST, with a T suffix that elsewhere in this family means a small reel, does not appear in the current addendum, so the quantity and the packing on that string have to be confirmed rather than assumed. The plain R row also carries Call TI in the finish column, which is a supply note and not a material change, but it does mean the finish cannot be certified from the table alone. We confirm body, reel and finish against the vendor record before quoting, and where a product is heading for a long life build the last time buy planning note sets out how we hold a buffer.