Contact Us

INA234AIYBJR

Brand: Texas Instruments
Texas Instruments INA234AIYBJR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA234AIYBJR — Power Management & Signal Chain | Superb Automation

INA234AIYBJR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA234AIYBJR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA234AIYBJR: 12 bit monitor in a 0.745 mm wafer level body

The INA234AIYBJR is a 12 bit current, voltage and power monitor in an 8 bump wafer level package that measures 0.745 mm by 1.508 mm, which is small enough to sit between two decoupling capacitors on a phone main board. It senses from 0.3 V to 28 V common mode while running from 1.7 V to 5.5 V, and reports current, bus voltage and power over an I2C bus that is compliant down to 1.2 V logic. Gain error is 0.5 percent maximum and offset 100 uV maximum, with a 10 nA maximum input bias current that allows a large shunt on a small current rail.

Twelve bits is the deliberate trade against the 16 bit members of the family. On a rail that carries between 100 mA and 3 A, a 12 bit converter over an 80 mV window still resolves 20 uV per step, which is 2 mA on a 10 milliohm shunt, and that is enough for a fuel gauge or a policy engine that is deciding whether to throttle. The extra four bits of a 16 bit part buy resolution below the offset of most shunts and cost current, package area and price.

Key data for the INA234AIYBJR

Common mode0.3 V to 28 V, high side or low side, independent of the supply rail
Resolution12 bit converter over a 20 mV or 80 mV full scale window, 20 uV per step at the wider setting
AccuracyGain error 0.5 percent maximum, offset 100 uV maximum, bias current 10 nA maximum
TimingConversion from 140 us to 8.244 ms with averaging from 1 to 128 samples
AlertOver and under current plus over and under voltage, one open drain output shared with the conversion ready flag
Supply1.7 V to 5.5 V, 300 uA typical, 1.2 V compliant I2C and SMBus

Body, marking and reel data

BodyYBJ, 8 bump DSBGA at 0.745 mm by 1.508 mm, the smallest body in this monitor family
Reel3000 pieces on a large reel for the R suffix in both the A and the B address options
FinishSNAGCU bumps at moisture level 1, unlimited floor life, no bake
Address setFour addresses per option from the A0 pin; the A and B options together cover eight devices on one segment
TemperatureMinus 40 C to 125 C, with the electrical table specified across the range

Where a 12 bit part is the right answer

Mobile phones, smart speakers, wearables and the auxiliary rails of a server are the listed applications. In each of them the interesting question is not a precise number but a direction and a magnitude: is this rail drawing 40 mA or 400 mA, has the camera module stopped drawing current, is the speaker amplifier idling. A 12 bit reading with a 0.5 percent gain error answers that, and it answers it from a body that does not force a change of board thickness.

The limits are set by the shunt and the common mode. At 20 mV full scale a 10 milliohm shunt saturates at 2 A, so a rail that can deliver 3 A needs the 80 mV setting or a smaller shunt. The 28 V ceiling covers a 24 V rail but nothing above it. And on a wafer level body the thermal path is through the bumps, so the two input traces have to be short, symmetric and wide enough to carry the current without adding a temperature gradient across the shunt, which would show up as a gain error that moves with load. Where a board is choosing between the 12 bit and the 16 bit members, the amplifier cross reference lists them by resolution and bias current, and the power management cross reference covers the rails each one is usually paired with.

Buyer questions on the INA234AIYBJR

Is 12 bit enough to catch a 5 mA standby current? On a 1 ohm shunt at the 20 mV setting the step is 20 uV, which is 20 uA, so 5 mA is 250 steps and clearly resolved. On a 10 milliohm shunt the same 5 mA is 50 uV and only two or three steps, so the shunt has to grow with the resolution limit in mind.

Does the part need a separate supply? No, it runs from the same 1.7 V to 5.5 V housekeeping rail as the host, and the bus pins accept 1.2 V logic, so no level shifter is needed on a low voltage processor.

How does it differ from the INA232? The INA232 is 16 bit with 48 V common mode and 0.3 percent gain error; this part is 12 bit, 28 V and 0.5 percent. Both use the same register map, so a host can move between them with a change of scale factor.

Availability and ordering notes

INA234AIYBJR is active at 3000 pieces on a large reel with SNAGCU bumps at moisture level 1, and the B address option is published at the same quantity in the same body. The package is a bare die on bumps, so the reel label and the moisture bag are the only identification once the parts are out of the original packing, and a street reel of this body cannot be verified by marking. We keep the bag label, the date code and the reel count with the shipment on the date code management record.