Contact Us

INA219BIDCNR

Brand: Texas Instruments
Texas Instruments INA219BIDCNR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA219BIDCNR — Power Management & Signal Chain | Superb Automation

INA219BIDCNR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA219BIDCNR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA219BIDCNR: 12-bit shunt and bus monitor that hands back amps and watts

The INA219BIDCNR is the B grade of the INA219, a shunt and bus monitor in an 8 pin SOT-23 that puts current, bus voltage and power into three registers a host reads over I2C or SMBus. The B grade is the tighter of the two published grades: offset is held to 50 uV maximum at gain 1 where the A grade allows 100 uV, and the current measurement error is 0.3 percent maximum against 0.5 percent on the A grade. On a 5 A rail with a 5 milliohm shunt the full scale signal is 25 mV, which is only 500 steps of the 12 bit converter, so the B grade offset window is where the low end of the range is won or lost.

The part carries a programmable gain amplifier with four settings rather than one fixed gain. At /1 the differential window is 40 mV, at /2 it is 80 mV, at /4 160 mV and at /8 320 mV, so a single order code spans a 100 milliohm sense resistor on a 3.3 V module and a 2 milliohm shunt on a 20 A rail. A calibration register and an internal multiplier convert the raw shunt reading into amperes, and a second register multiplies current by bus voltage for watts, which removes that arithmetic from the host on a supply that is already short of cycles.

Key data for the INA219BIDCNR

Bus range0 V to 26 V applied, 32 V full scale with the BRNG bit set and 16 V with it clear, so a 24 V rail fits and a 48 V rail does not
Shunt rangePlus or minus 40, 80, 160 or 320 mV across the four gain settings, 10 uV per step on the 12 bit converter
AccuracyOffset 50 uV maximum, current error 0.3 percent maximum and bus error 0.5 percent maximum on the B grade
RejectionCommon mode rejection 100 dB minimum and 120 dB typical across 0 V to 26 V of common mode
InterfaceI2C or SMBus with 16 addresses from the A0 and A1 pins, and a 28 ms bus timeout that releases a stuck line
Supply3 V to 5.5 V single rail, 1 mA maximum, minus 40 C to 125 C ambient

Body, marking and reel data

BodyDCN, 8 pin SOT-23 at 1.63 mm by 2.90 mm; the same die also ships in the D SOIC at 3.91 mm by 4.90 mm
Reel3000 pieces on a large reel for the R suffix and 250 on a small reel for the T suffix, both at the same moisture level
FinishNIPDAU, level 2 at 260 C with a one year floor life, so the reel carries a bake clock that level 1 parts do not
MarkingB219 on the B grade and A219 on the A grade, four characters that name grade and family but not the body
Grade splitA and B share the package and the pinout; only the offset, gain error and current error rows separate them in the electrical table

Where a 12 bit bus monitor still earns its place

The application list in the document is telecom rectifiers, servers, notebooks, battery chargers, welding equipment and bench supplies. All of those have one thing in common: a rail that has to report its own consumption to a supervisory processor over a bus that already exists. The INA219 answers that with three registers and no external multiplexer, and the 26 V ceiling covers a 24 V telecom rail with headroom for a charging cycle but not a 48 V plant.

Two circuit details decide whether the reading is worth trusting. The first is the shunt itself. At gain /1 the full scale is 40 mV, so a 10 milliohm shunt reaches 4 A before the input saturates, and a 1 milliohm shunt reaches 40 A, which is more than a 2 oz trace on a small board wants to carry. The second is the gain setting against the resolution: at /8 the step size stays 10 uV but the window grows to 320 mV, so a small signal loses no resolution by moving to a coarser gain. Where a board is moving between the INA219 and the newer 16 bit monitors in the same family, our power management cross reference groups the parts by bus range, resolution and interface, and the amplifier cross reference note covers the analog output members that replace a digital monitor when the host has an ADC but no spare bus.

Buyer questions on the INA219BIDCNR

Does the B grade cost more than the A grade? It carries tighter offset and gain rows, so it is priced above the A grade when both are in stock, and the A grade is the one now printed obsolete in the SOIC body. On a rail where 0.5 percent current error is acceptable the A grade is the cheaper answer while stock lasts.

Can the part measure a negative current? The shunt input is bidirectional and reports a signed value, so charge and discharge both read correctly. The bus voltage, however, is measured from the IN pin to ground and is unipolar, so it cannot go below zero.

Why does the SMBus timeout matter? Because a host that is reset in the middle of a transfer can hold SDA low and lock the bus for every device on it. The 28 ms timeout releases the line, which is the difference between a recoverable glitch and a board that needs a power cycle in the field.

Availability and ordering notes

INA219BIDCNR is active at 3000 pieces on a large reel with NIPDAU and moisture level 2, marking B219. Two rows in the same addendum need care before a purchase order goes out. INA219AID, the SOIC A grade in a tube, is printed Obsolete, so a legacy line that still calls that string has to move to the reel row or to the B grade. And the addendum prints the .B row of INA219BIDCNRG4 at 250 pieces in a small reel while every sibling row of the same body prints 3000 on a large reel, which reads as a column shift rather than a packing difference; a reel quantity on that string should be confirmed in writing. The date code and the moisture history travel with the shipment on the date code management note.