INA213AIRSWR
Product Specifications
INA213AIRSWR
Texas Instruments — Power Management & Signal Chain
Product Overview
The INA213AIRSWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
INA213AIRSWR: the same 50 V/V monitor in a 10 pin UQFN
The INA213AIRSWR is the UQFN 10 pin body of the 50 V/V INA213, measuring 1.80 mm by 1.40 mm, with the same die, the same 26 V common mode window, the same 35 uV maximum offset and the same 80 kHz of bandwidth at gain 50. It exists for boards where the SC70 footprint does not fit or where the extra pins of the RSW body are wanted for a cleaner ground return. Supply range is 2.7 V to 26 V and quiescent current is 100 uA maximum.
The packing is where this row surprises people. The addendum prints the plain INA213AIRSWR string against a SC70 body at 3000 pieces on a large reel, while the lettered rows of the same string print the UQFN RSW 10 body at 250 pieces on a small reel, moisture level 2, marking KPJ. Two facts follow. The RSW body ships in prototype quantity only on the lettered rows, and the plain row's package column contradicts its own suffix. Both are read from the reel label before a line is planned.
Key data for the INA213AIRSWR
| Gain | 50 V/V, the low gain row of the INA210 to INA215 family with 80 kHz of bandwidth |
| Input | Common mode minus 0.3 V to plus 26 V, bidirectional, independent of the supply |
| Accuracy | Offset 35 uV maximum, 0.5 uV per degree drift, gain error 1 percent over temperature |
| Bandwidth | 80 kHz at a 10 pF load, falling to 30 kHz at gain 100 and 7 kHz at gain 500 |
| Supply | 2.7 V to 26 V, 100 uA maximum quiescent current, no enable pin |
| Body size | UQFN 10 pin at 1.80 mm by 1.40 mm, smaller in area than the SC70 it competes with |
Body, marking and reel data
| Body | RSW, UQFN 10 pin, 1.80 mm by 1.40 mm, a different footprint from the SC70 6 pin of the same die |
| Reel | 250 pieces on a small reel on the lettered rows, the only packing printed for the RSW body |
| Finish | NIPDAU, moisture level 2 at 260 C with a one year floor life |
| Marking | KPJ on the UQFN row, three characters shared with the small reel string |
| Status | Active on the lettered rows, while the plain row is printed against the SC70 packing |
Choosing the body before the gain
The UQFN and the SC70 are not interchangeable on a board, so the body decision comes first and the gain decision second. That order matters because the same die is offered in both, and a purchasing team that compares prices across the family can easily compare two different footprints. The RSW body is also a 250 piece reel, which is a prototype quantity: a production run of 5000 boards needs twenty reels or a repack, and that is a line planning problem rather than a price problem.
Thermally, the UQFN with its exposed pad gives a better path to the ground plane when the monitor sits next to a hot shunt, and the smaller body shortens the trace from the shunt terminals. Where a board is being re-spun anyway, our pin to pin cross reference records which current sense families share a land pattern and which only share a die, and the kitting service page covers how a twenty reel kit is built and reconciled against a BOM.
Buyer questions on the INA213AIRSWR
Why only 250 pieces on a reel? That is the packing the addendum prints for the RSW body on this string. A production quantity is built from multiple reels, which is normal for small body sizes and worth knowing before the line is scheduled.
Can an SC70 part be fitted to a UQFN land? No. The pin count and the pitch differ. The die is the same, the footprint is not, so the body has to be chosen before the board is released.
Is the moisture level different from the SC70 row? Yes, level 2 here against level 1 on the SC70 lettered row. That means a one year floor life and a bake after a year on the shelf.
Availability and ordering notes
The RSW rows are active, 250 pieces per small reel, NIPDAU, moisture level 2, marking KPJ. The plain string's package column in the same table prints the SC70 body at 3000 pieces, which is an addendum inconsistency and not a second product, so the order code and the body are confirmed against the reel label together. An incoming check of the marking is the cheapest way to catch a mixed carton, and the incoming inspection plan page sets out what we look at. On a 250 piece reel the check is quick: body size against the label, the marking KPJ, and a moisture card in the bag. Anything outside that pattern is quarantined before it reaches the line, which is cheaper than a rework batch.