Contact Us

INA199A2DCKR

Brand: Texas Instruments
Texas Instruments INA199A2DCKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA199A2DCKR — Power Management & Signal Chain | Superb Automation

INA199A2DCKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA199A2DCKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA199A2DCKR: 100 V/V zero drift monitor in a 2 mm SC70

The INA199A2DCKR is the 100 V/V member of the INA199 series, a bidirectional current shunt monitor in a 6 pin SC70 body measuring 2.00 mm by 1.25 mm. It senses across a shunt anywhere from 0.3 V below ground to 26 V above it while running from a 2.7 V to 26 V supply, and it holds offset to 150 uV maximum with a zero drift chopper stage. The three gains in the series are 50, 100 and 200, chosen by the digit after the letter: x1 for 50, x2 for 100, x3 for 200. Gain error is 1.5 percent maximum over temperature on the A and B versions and 1 percent on the C version, with 10 ppm per degree of gain drift and 0.5 uV per degree of offset drift.

The useful number here is the 10 mV full scale input the data sheet keeps referring to. At gain 100 a 10 mV shunt drop becomes 1 V at the output, so a 10 milliohm shunt covers 1 A and a 1 milliohm shunt covers 10 A. That is the range where a phone, a wireless charger or a notebook battery rail actually lives, and it is why this part appears in so many battery charger circuits. Quiescent current is 100 uA maximum, which is small enough to leave the monitor permanently powered on a battery rail.

Key data for the INA199A2DCKR

Gain100 V/V, with 50 V/V and 200 V/V siblings in the same body and the same land pattern
InputCommon mode minus 0.3 V to plus 26 V, bidirectional, independent of the 2.7 V to 26 V supply
AccuracyOffset 150 uV maximum, offset drift 0.5 uV per degree, gain error 1.5 percent maximum on A and B rows
Bandwidth30 kHz at gain 100, 80 kHz at gain 50 and 14 kHz at gain 200, all with a 10 pF load
Supply2.7 V to 26 V, 100 uA maximum quiescent current, no shutdown pin
OutputVoltage output referenced to the REF pin, which sets the zero current level for bidirectional sensing

Body, marking and reel data

BodyDCK, SC70 6 pin, 2.00 mm by 1.25 mm, with the UQFN 10 pin as the alternative in the same series
Reel3000 pieces on a large reel for the R suffix, 250 pieces on a small reel for the T suffix
FinishNIPDAU, moisture level 2 at 260 C, one year floor life
MarkingOBH on the INA199A2 row, a three character code that does not carry the gain
TemperatureMinus 40 C to 125 C across every gain option in the series

Bidirectional sensing and the reference pin

A bidirectional monitor needs a zero point that is not ground, because a negative shunt drop has to produce a positive output. The INA199 does that with a REF pin: tie it to a reference and the output sits at that level at zero current, swinging above and below as the current reverses. Tying REF to ground turns the part into a unidirectional monitor with the full output range in one direction, which is what a charge only rail wants. Getting this wrong is the most common integration mistake, and it does not show up until the battery is discharging.

The second integration point is the shunt itself. A 10 milliohm 1 percent resistor at 3 A dissipates 90 mW and drops 30 mV, which at gain 100 is 3 V, already close to the rail on a 3.3 V supply. The gain has to be chosen against the maximum current and the supply together, not against the resolution alone. Where a charger project is moving between gain options, our amplifier cross reference lists the series by gain and offset, and the BOM shortage recovery page sets out how a missing gain option is covered without a board change.

Buyer questions on the INA199A2DCKR

Can I change gain by swapping to the A3 version? Yes within the series. The 50, 100 and 200 rows share the body and the pinout, so a gain change is a part number change and a recalibration, not a board change.

What does the C version change? The C rows tighten the gain error limit to 1 percent over temperature against 1.5 percent on the A and B rows. Offset and drift are unchanged, so the C part is bought when the current reading is a measurement rather than a trip.

Does the part work on a 26 V rail with a 3.3 V supply? Yes. The common mode window is independent of the supply, so the inputs can sit at 26 V while the device runs from 3.3 V. The output then swings inside the 3.3 V range.

Availability and ordering notes

The A2 row is active at 3000 pieces on a large reel with NIPDAU and moisture level 2, and the .B row of the same string ships 250 pieces on a small reel for prototypes. The UQFN body is a different footprint, so a line that has been running the SC70 cannot take it without a land change. We check the gain digit, the body and the reel size on the reel label before shipping, and the date code management note records the moisture level so the line knows whether a bake is needed.