INA190A4QDCKRQ1
Product Specifications
INA190A4QDCKRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The INA190A4QDCKRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
INA190A4QDCKRQ1: gain of 200 in the automotive SC70 string
The A4 member of the INA190 family has a gain of 200 V/V, and the Q1 string carries the automotive qualification. The electrical core is the same family specification: 1.7 V to 5.5 V supply, 0.1 V to 40 V common mode, 0.5 nA of input bias current, 3 microvolts typical offset, 132 dB typical common mode rejection and an enable pin. At a gain of 200 a 5 milliohm shunt carrying 2 A develops 10 mV, which becomes 2 V at the output, so a 12 V system's load current fits a 3.3 V converter without a second stage.
The Q1 qualification changes the documentation, the temperature range and the part marking, which is why the automotive string is documented separately from the industrial INA190 file. Gain error at this gain is 0.06 per cent typical and 0.3 per cent maximum, reference rejection is specified per gain, and the output swings to within 20 mV of the positive rail, so the usable output range on a 1.8 V supply stops just below the rail rather than at it.
Key data for the INA190A4QDCKRQ1
| Gain | 200 V/V fixed, so a 5 milliohm shunt at 2 A gives 2 V of output swing |
| Offset | 3 microvolts typical, drift 10 nanovolts per degree typical, bias current 0.5 nA typical |
| Common mode | 0.1 V to 40 V, 132 dB typical and 150 dB minimum rejection, supply 1.7 V to 5.5 V |
| Accuracy | Gain error 0.06 per cent typical and 0.3 per cent maximum over temperature at this gain |
| Output | Within 20 mV of the positive rail and 1 mV of ground at a 1.8 V supply, high impedance when disabled |
| Enable | About 65 microamps enabled and 150 nanoamps in shutdown, which suits a scanned battery channel |
Body, marking and reel data
| Body | DCK, SC70 6 pin, 2 mm by 1.25 mm, 3000 pieces on a large reel, 210 mm carrier |
| String | The Q1 automotive string is not printed in the industrial INA190 addendum, so the row is confirmed per order |
| Marking | A four character code that combines the gain and the qualification, read at goods inward rather than assumed |
| Grade | Automotive qualification with the grade and temperature range printed in the automotive document |
What the automotive qualification adds to a current monitor
A current monitor sits on a rail that feeds a load in a vehicle, and the failure modes that matter are not the ones a bench measurement shows: a load dump transient, a reverse battery connection and a short to chassis all arrive at the sense pins. The Q1 string is qualified for the temperature profile, the ESD classes and the documentation a tier one supplier audits, and the part marking records that qualification so a mixed reel is caught before it is placed. The gain of 200 is the middle of the family, chosen where the shunt loss has to stay small but the output still has to fill a converter range, and where the 15 microvolt maximum offset at that gain still leaves a reading that does not need a trim at test. A part that fails a load dump test is not recovered by a tighter specification, so the qualification record is what a platform approval turns on.
Where a product is being moved from an industrial board to a vehicle platform, the SC70 footprint carries over and the part number changes, which is the cheapest kind of platform transition to manage. Our supplier quality audit page lists the documents that travel with a Q1 lot, and the power management cross reference lists the gain options across the family.
Buyer questions on the INA190A4QDCKRQ1
Is the Q1 row listed in the industrial data sheet? No. The industrial INA190 document prints INA190A1 to A5 rows without the automotive suffix, so the Q1 string is confirmed against the automotive document or with the vendor before an order is booked.
Can it measure both directions? Yes, this family is bidirectional when the reference pin is set above ground. A unidirectional measurement ties the reference to ground and ignores the negative half of the swing.
What shunt suits a 10 A full scale? At a gain of 200, a 1 milliohm shunt gives 2 V at 10 A. That keeps the shunt loss at 0.1 W and uses most of a 3.3 V converter range.
Availability and ordering notes
The SC70 body at 3000 pieces is the production packing and the string is confirmed against the automotive document on every order rather than inferred from the catalogue line. We keep the qualification papers with the lot and record the marking check at goods inward, so a delivery can be traced back to the reel it came from through the sourcing audit trail.