Contact Us

INA186A5IDDFR

Brand: Texas Instruments
Texas Instruments INA186A5IDDFR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA186A5IDDFR — Power Management & Signal Chain | Superb Automation

INA186A5IDDFR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA186A5IDDFR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA186A5IDDFR: the same gain of 500 in the thin eight pin body

The DDFR code is the thin SOT-23 body with eight pins, and it carries the same gain of 500 V/V as the six pin member of the INA186 family. The extra pins are not extra functions in the electrical sense: the body gives more space around the pad, a slightly larger thermal path and a pinout that some placement machines handle more easily than a 2 mm by 1.25 mm six pin package. Offset, bias current, common mode range and bandwidth are the same figures as the rest of the family, 3 microvolts typical, 0.5 nA, 0.1 V to 40 V and 35 kHz at this gain.

The reason to choose between the two bodies is mechanical rather than electrical. A board with 0402 passives and a fine pitch converter has room for the SC70; a board built on a coarser process, or one where the amplifier sits next to a shunt that has to be hand reworked, is easier with the thin SOT-23. The reel is 3000 pieces in both cases, so the packing does not force the choice. A body change on an existing board is a copper revision, so the mechanical question is settled before the electrical one is discussed, and a customer with both positions free should pick the body the assembly house places most often.

Key data for the INA186A5IDDFR

Gain500 V/V fixed, the highest in the family, so a 10 mV shunt drop gives 5 V at the output
Offset3 microvolts typical and 50 microvolts maximum at a 1.8 V supply, drift 0.05 microvolts per degree
Common mode0.1 V to 40 V, 120 dB minimum rejection, 150 dB typical, from a 1.7 V to 5.5 V supply
Bias0.5 nA typical, which keeps the error small when a shunt of tens of ohms is used
Bandwidth35 kHz at a gain of 500, 30 microseconds settling to 1 per cent, enable pin for a shutdown state
OutputSwing to within 20 mV of the positive rail and 2 mV of ground at a 1.8 V supply, 10 mV at zero current

Body, marking and reel data

BodyDDF, thin SOT-23 8 pin, 2.3 mm by 2.55 mm, 3000 pieces on a large reel, 180 mm carrier
Marking1EB on the A5 row of this body, which is how the gain is confirmed without opening the label
FinishNIPDAU or call TI depending on the row, moisture level 1 and 2 both appear in the addendum
GradeAmbient minus 40 C to 125 C on the industrial rows, with the Q1 string documented separately

Two bodies, one silicon, one decision

When a customer's board has an existing eight pin position, the DDF body drops in and the six pin body does not, even though the die and the reel size are the same. That is a mechanical constraint rather than an electrical one, and it is the sort of thing that turns a two week sourcing job into a four week one when it is discovered after the artwork is released. Checking the body against the footprint before quoting is part of how we handle a substitution.

The gain of 500 also means the output is close to the rail at full scale, and the swing specification matters: within 20 mV of the positive rail at 1.8 V is a small margin, so a circuit that expects 5 V of output from a 5.5 V supply has to leave the headroom. Our drop in verification page lists the checks that a body change requires, and the pin to pin cross reference page covers which of them share a pinout.

Buyer questions on the INA186A5IDDFR

Is the DDF body the same silicon as the DCK body? Yes. The family is one die in several packages, and the electrical table is shared. The pin count and the pad geometry are what differ.

Can the reference pin set the zero level? The reference pin sets the output level at zero current, so a bidirectional measurement is possible within the output swing. A unidirectional measurement ties it to ground.

Does the enable pin have a default state? It has an internal pull up on this family, so an unused pin leaves the channel running. A circuit that needs the channel off by default drives the pin low.

Availability and ordering notes

Both bodies ship 3000 pieces on a large reel and both are active in the addendum, so the choice is the footprint. Where a customer's approved list names only one body, we quote that one and flag the other as an alternative rather than substituting silently. The comparison and the paperwork are kept with the quote through the sourcing audit trail.