INA185A3IDRLR
Product Specifications
INA185A3IDRLR
Texas Instruments — Power Management & Signal Chain
Product Overview
The INA185A3IDRLR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
INA185A3IDRLR: gain of 100 in the small bidirectional current sense body
The A3 member of the INA185 family has a fixed gain of 100 V/V in the same 1.6 mm SOT-563 body as the rest of the family, with a 26 V common mode range, a 2.7 V to 5.5 V supply and a reference pin that sets the zero current level. At this gain a 1 milliohm shunt carrying 5 A gives 5 mV, which becomes 500 mV at the output, so a small shunt and a small loss can still fill a useful part of a 12 bit converter range. Bandwidth is 150 kHz at this gain, and the gain error is 0.05 per cent across the A1 to A3 members.
The trade at a gain of 100 is the offset multiplied by the gain. The 25 microvolt typical offset becomes 2.5 mV at the output, so a circuit that measures a few hundred milliamps through a small shunt sees the offset as a significant part of the reading at the bottom of the range. That is why the family is offered in four gains: a low gain for a wide range with a big shunt, a high gain for a narrow range with a small one, and the choice is made from the current and the loss allowed in the shunt.
Key data for the INA185A3IDRLR
| Gain | 100 V/V fixed, so a 1 milliohm shunt at 5 A gives 500 mV of output swing |
| Direction | Bidirectional, with the reference pin setting the zero current level to half the supply in most uses |
| Common mode | Up to 26 V, independent of the supply, so the part works on a 20 V battery stack |
| Offset | 25 microvolts typical, gain error 0.05 per cent over temperature on the A1 to A3 members |
| Bandwidth | 150 kHz at a gain of 100, against 350 kHz at a gain of 20 and 210 kHz at 50 |
| Body size | SOT-563, 1.6 mm by 1.6 mm by 0.55 mm, six pins including the reference pin |
Body, marking and reel data
| Body | DRL, SOT-563 6 pin, the smallest of the bodies this family ships in, with a 4000 piece large reel |
| Marking | 1DX on the A3 row, one character different from the A2 row, so a mixed bag needs the label read |
| Status | The plain INA185A3IDRLR row prints obsolete and the .B row prints active against the SC70 body |
| Grade | Ambient minus 40 C to 125 C, moisture level 1 with unlimited floor life on the active rows |
Status first, then the electrical choice
This string is a case where the electrical selection is the easy part and the availability question is the one that decides the order. The addendum prints the plain row as obsolete while the .B row of the same string prints active against a different body, so a board built around the DRL footprint may need either a stock position or a body change. Both are normal, but neither is something a purchase order should discover on the delivery date.
Where a customer's product is in production and the DRL body is short, the gain can be kept and the body changed to the SC70 pinout if the footprint allows, or the circuit can move to a larger body with a different gain and a recalculated shunt. Our obsolescence management page covers the sequence, and the last time buy planning page sets out how a final order is sized against the remaining production life.
Buyer questions on the INA185A3IDRLR
Does the .B suffix mean a different silicon? The addendum prints the .B row against the SC70 body, which suggests a packing or body revision rather than a new die. The transfer function is the same, and the body has to be confirmed before a footprint is committed.
What shunt suits a 2 A full scale? At a gain of 100, a 5 milliohm shunt gives 1 V at 2 A, which is a reasonable converter target with a 50 mV drop. A larger shunt raises the signal and the loss together.
Can the part be used on a 24 V rail? The common mode range stops at 26 V, so a 24 V rail sits inside it with 2 V of margin but no room for a transient. A rail that rings above 26 V needs a higher voltage monitor.
Availability and ordering notes
Every order for this string is checked against the current addendum first, because the plain row and the .B row print different statuses. Where the DRL body is unavailable, we quote the alternative body with its own part number rather than shipping a lookalike, and the customer's approved list decides whether the change is acceptable. The check is recorded in the OEM procurement review that accompanies the first shipment of any new string.