Contact Us

INA180A1IDBVR

Brand: Texas Instruments
Texas Instruments INA180A1IDBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA180A1IDBVR — Power Management & Signal Chain | Superb Automation

INA180A1IDBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA180A1IDBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA180A1IDBVR: fixed gain 20 V per V current sense amplifier with a 26 V common mode range

INA180A1IDBVR is a low and high side voltage output current sense amplifier in a SOT-23 body of 5 pins. It amplifies the drop across a shunt with a fixed gain of 20 and delivers a voltage to an analog to digital input, sensing on either side of the load between minus 0.2 V and plus 26 V regardless of its own supply. The A1 suffix is the 20 V per V gain option and the DBVR order code is the five pin SOT-23 on a 3000 piece reel.

Order code and package

Order codeINA180A1IDBVR
Package5-pin SOT-23, 2.9 mm by 1.6 mm
Packingtape and reel, 3000 pieces
Gain optionA1 equals 20 V per V, with A2 at 50, A3 at 100 and A4 at 200
Common mode rangeminus 0.2 V to plus 26 V
Supply2.7 V to 5.5 V, single supply
Outputvoltage output, rail to rail
Temperature rangeminus 40 to plus 125 degrees

Electrical parameters that decide the application

Bandwidth350 kHz on the A1 gain option
Offset voltage150 microvolt maximum at zero common mode, 500 microvolt at 12 V
Offset drift1 microvolt per degree maximum
Gain error1 percent maximum
Supply current260 microampere maximum for the single channel
Output slew rate2 V per microsecond
Common mode rejectionspecified across the full minus 0.2 V to 26 V range

Family variants and how they differ

A120 V per V, 350 kHz, this order code
A250 V per V, lower bandwidth
A3100 V per V
A4200 V per V, the highest gain and the narrowest bandwidth

Points to check before this part goes on a BOM

The gain is fixed at 20, so the shunt and the converter range have to be chosen together. A 10 mV shunt drop becomes 200 mV at the output, which suits a 3.3 V converter measuring a 160 mV to 3.1 V window, and a 50 mV full scale shunt would need the A3 option at 100 to reach 5 V.

Offset voltage is the accuracy limit at low currents, not gain error. The 150 microvolt maximum at zero common mode is 7.5 mV at the output with a gain of 20, and against a 20 mV shunt drop that is a 7.5 percent error, so a build that measures small currents needs the larger shunt or the higher gain option rather than a better reference.

The offset figure moves with common mode: 150 microvolt at 0 V and 500 microvolt at 12 V. That difference is not a defect, it is the price of a common mode range that extends above the supply, and a build that senses a 24 V rail has to budget the 500 microvolt figure and not the one printed first in the feature list.

The minus 0.2 V bottom of the common mode range allows low side sensing through a ground return that lifts slightly, which is the reason the part is described as low and high side. Sensing a shunt below ground by more than 200 mV is outside the part and will read as a stuck output.

Bandwidth of 350 kHz on the A1 option is the highest in the family and falls as gain rises, so a motor current loop that samples at 20 kHz has room on A1 and very little on A4. The 2 V per microsecond slew rate also limits how fast a full scale step appears at the converter input.

The supply current of 260 microampere is a maximum for the single channel and rises to 500 and 900 microampere for the dual and quad versions. On a battery product that is a real load, and the part has no shutdown pin, so it is either supplied from a switched rail or accepted as a standing drain.

Two pinouts share the DBV package and they are not interchangeable: the A and B variants swap the supply and output positions. A board that has been laid out for one and is loaded with the other reads as a dead channel, so the pinout letter belongs on the assembly drawing next to the order code.

Choosing the gain option is the same decision as choosing the shunt. A 3.3 V converter with a 1.6 V usable input span and a 20 V per V gain measures up to 80 mV of shunt drop, so a 10 A rail needs an 8 milliohm shunt to use the range. A 4 milliohm shunt would only reach 1.6 V at 20 A and would waste half the converter.

The output is rail to rail but it cannot go below ground, so a bidirectional current through a single shunt with this part needs a reference offset. A part with a fixed gain and no reference pin measures one direction only, and a bidirectional measurement belongs with a different family that has a reference input.

Where this order code fits

It is used for motor control current feedback, battery and adapter current monitoring, over current detection, lighting control and solar inverter current sensing. Teams comparing it with a neighbouring part start from our Amplifier Cross Reference page, and teams replacing a part that has gone end of life start from the How to Verify a Drop in Replacement page.

Questions buyers ask

Can I change the gain? Only by changing the order code. The gain network is inside, so A1, A2, A3 and A4 give 20, 50, 100 and 200 V per V and the part number has to match the shunt chosen.

Does it work above its own supply? Yes for the input. The common mode range reaches 26 V independent of the 2.7 V to 5.5 V supply, but the offset is larger at high common mode.

What is the output at zero current? The offset voltage multiplied by the gain, which for a 150 microvolt offset at a gain of 20 is about 3 mV, plus the output stage's own limitation near ground.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.