DRV5023AJEDBZRQ1
Product Specifications
DRV5023AJEDBZRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The DRV5023AJEDBZRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
DRV5023AJEDBZRQ1: a 6.9 mT unipolar switch in the automotive SOT-23
The DRV5023AJEDBZRQ1 is a digital unipolar Hall switch in the three pin SOT-23 body, coded with the AJ sensitivity, the E temperature grade and the Q1 automotive qualifier. Where a latch needs the field to reverse, this part needs the field only to fall: the output goes low above the operate point and comes back when the field drops below the release point, so a single magnet passing once produces exactly one pulse.
The AJ option sits in the middle of the three thresholds. The operate point is 6.9 mT and the release point is 3.2 mT, which gives 3.7 mT of hysteresis. The part runs from 2.5 V to 38 V, sinks 30 mA, survives 22 V of reverse supply, and is ready 35 us after power is applied.
Unipolar behaviour is what makes the part useful on a door, a drawer, a valve or a docking cradle: the field is present or absent rather than alternating, and the switch has to work with the one magnet that the mechanical assembly can carry. The FI version of the same family inverts the output sense, so a board that expects a high on field presence needs the right suffix rather than an inverter.
Key data for the DRV5023AJEDBZRQ1
| Output | Open drain, 30 mA sink, low when the field is above the operate point |
| Operate point | 6.9 mT typical on the AJ option, within 10 percent over temperature |
| Release point | 3.2 mT typical, so 3.7 mT of hysteresis |
| Supply | 2.5 V to 38 V with no external regulator, reverse protection to 22 V |
| Response | 35 us power-on time, then a pulse marks the moment the output is valid |
| Temperature | Minus 40 C to plus 150 C on the E grade in the code |
| Protection | Reverse supply, load dump, output short circuit and overcurrent |
Body, packing and marking data
| Body | SOT-23, three pins, 2.92 mm by 2.37 mm footprint on the board |
| Packing | 3000 pieces on a large reel on the R suffix |
| RoHS and finish | RoHS compliant, tin lead finish on the published industrial rows |
| Marking | PLAJ and 1J22 on the industrial AJ body, so the automotive die needs the reel label to be read |
Reading the code and the gap in the addendum
The string decodes as DRV5023, AJ sensitivity, E temperature, DBZ body, R large reel, Q1 automotive. Each letter is documented, but the combination is not. The orderable addendum of the current data sheet prints the industrial rows only, AJQDBZR, AJQDBZT, AJQLPG and AJQLPGM, and it carries no row for an AJ part with both the E grade and the Q1 qualifier.
That does not mean the part does not exist. It means the string has to be confirmed with the vendor or against a customer purchase order before it is written into a bill of materials as a released item. We write the page this way so that an engineer reading it does not assume the suffix is stocked in the shape the code implies.
The second check is the temperature grade against the qualification. The E grade extends operation to 150 C, and a Q1 part is qualified to AEC-Q100, but the two are separate decisions: a 150 C ambient part still has to pass the automotive qualification for the program it sits in.
Where this switch earns its place
Docking detection on a handheld, door and lid position on an enclosure, valve end stops, pulse counting on a rotating target and general proximity sensing are the five applications the vendor names. In each of them the magnet is fixed to the moving part and the sensor to the frame, so the air gap budget is what decides the sensitivity option.
When the mechanical envelope changes after the board is released, the pin to pin cross reference page lists what can move between the FA, AJ and BI options without a board change, and the how to verify a drop in replacement page covers the magnet and threshold checks before a substitute is accepted.
Questions we get on this code
Is a unipolar switch safe against the wrong pole? Yes, in the sense that the wrong pole never turns it on, but that is also the failure mode people miss: a magnet fitted backwards produces no output at all and the sensor is blamed first. The data sheet defines a south pole at the marked face as positive, so the assembly drawing should show the pole, not just the magnet.
The second question is about the output pull up. The output sinks 30 mA, which is enough for an opto coupler or a relay driver, but the pull up has to be sized for the current the receiving input needs and for the rise time at the cable capacitance. A 10 k pull up into a long harness turns a clean edge into a slow ramp, and a controller with a Schmitt trigger input will read it late.