Contact Us

CC3200R1M2RGCR

Brand: Texas Instruments
Texas Instruments CC3200R1M2RGCR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CC3200R1M2RGCR — Power Management & Signal Chain | Superb Automation

CC3200R1M2RGCR

Texas Instruments — Power Management & Signal Chain

Product Overview

The CC3200R1M2RGCR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CC3200R1M2RGCR single chip Wi-Fi microcontroller in the 64 pin 9 by 9 mm QFN body

The CC3200R1M2RGCR is a Wi-Fi certified microcontroller that puts an application processor, a Wi-Fi network processor and a power management subsystem in one package. The application core is an Arm Cortex M4 at 80 MHz with up to 256 KB of RAM, the network processor is a second Arm core that runs the 802.11 b/g/n radio, the baseband, the MAC, the driver, the supplicant and a TCP/IP stack from ROM, and the two talk through a documented interface. For a product that has to be connected but has no Wi-Fi experience on the team, the whole protocol side arrives finished.

The value of the part is the split between the two cores. The network processor handles association, security, retries and the sockets, so the application core sees a simple send and receive interface and does not have to schedule around beacon timing. That is why an 80 MHz M4 is enough to run a cloud connected product: the radio and the stack are not competing with the application for cycles. The cost is that the product is tied to the vendor stack and its update path, which is a decision worth taking with the product life in mind rather than only at the prototype stage.

Key parameters taken from the CC3200R1M2RGCR document

Application coreArm Cortex M4 at 80 MHz, with up to 256 KB of RAM and peripheral drivers in ROM
Network processorDedicated Arm core running 802.11 b/g/n radio, baseband, MAC, Wi-Fi driver and supplicant, with the TCP/IP stack in ROM
SocketsEight simultaneous TCP or UDP sockets and two simultaneous TLS and SSL sockets, with a crypto engine supporting 256 bit AES
SecurityWPA2 personal and enterprise, with a hardware crypto engine covering AES, DES, 3DES, SHA2, MD5, CRC and checksum
Transmit power18.0 dBm at 1 Mbps DSSS and 14.5 dBm at 54 Mbps OFDM
Receive sensitivityMinus 95.7 dBm at 1 Mbps DSSS and minus 74.0 dBm at 54 Mbps OFDM
Application throughput16 Mbps UDP and 13 Mbps TCP
Operating modesStation, access point and Wi-Fi Direct, with SmartConfig, access point mode and WPS2 for provisioning
Power modesHibernate 4 microamps, low power deep sleep 250 microamps, idle connected 825 microamps at DTIM 1
Traffic current59 mA in receive with the application core active at 54 Mbps OFDM, 229 mA in transmit at 54 Mbps OFDM at maximum power
Supply2.1 to 3.6 V in wide voltage mode with VIO tied to VBAT, or a preregulated 1.85 V mode, through an integrated DC to DC converter
Clocks40.0 MHz crystal with internal oscillator and a 32.768 kHz crystal or external RTC clock
PeripheralsFour channel 12 bit ADC, 27 GPIO, eight bit parallel camera interface, one McASP with two I2S channels, SD/MMC, two UARTs, SPI, I2C, four 16 bit PWM timers and a watchdog
TemperatureMinus 40 to plus 85 C ambient
BodyQFN 64 pins, 9 by 9 mm, 0.5 mm pitch
Order code factsCC3200R1M2RGCR, VQFN RGC 64 pins, 2500 pieces on a large reel, NIPDAU finish, moisture level 3 with a 168 hour floor life, minus 40 to plus 85 C; the same code also appears on a 260 piece tray row

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The 229 mA transmit figure is the number that decides the power supply. A Wi-Fi burst is short and the current step is large, so a supply that cannot deliver the peak will sag and the radio will either retry or drop the association. On a product powered from a USB adapter this is easy. On a battery product it means a bulk capacitor close to the package and a regulator with enough headroom, and it means the battery has to be able to deliver the pulse at the end of its life rather than when it is new.

Hibernate at 4 microamps is what makes a battery product possible at all, and it is only reachable if the application core, the network processor and the external flash are all put down in the right order. The part boots from external serial flash, so the flash has to be in deep power down as well, and any pull up or level shifter left powered will hide the 4 microamps completely. The realistic figure on an assembled board is often five to ten times the data sheet number, and finding where the extra current goes is the work that decides the battery life.

The preregulated 1.85 V mode is worth understanding before the power tree is fixed. In wide voltage mode the internal DC to DC converter runs from the battery and produces the rails it needs, which is efficient and allows a 2.1 to 3.6 V supply. In the preregulated mode the part expects 1.85 V and the converter is bypassed, which suits a system that already has that rail. The two modes have different external component counts and different efficiency curves, and a product that starts in one and moves to the other needs a board revision rather than a firmware change.

The 27 GPIO and the peripheral set decide how much of the product can live on this one part. A camera interface, an SD card, an audio port and a display are all available, which is unusual for a Wi-Fi microcontroller and is why the part appears in connected cameras and audio products. The catch is that the RAM is shared between the application and the network stack buffers, and a product that streams video through the socket interface runs out of memory before it runs out of pins.

  • Transmit current and supply droop during an association burst, measured at the package pins with the production regulator.
  • Hibernate current on the assembled board, with the external flash in deep power down and every pull up accounted for.
  • Receive sensitivity on the final antenna, since the 9 by 9 mm body and the antenna clearance decide the practical range.
  • Association time and reconnect behaviour after a router reboot, because a product that takes a minute to rejoin looks broken to a user.
  • Throughput over the socket interface with the application running, since the 16 Mbps UDP figure is a radio figure and the application may not reach it.
  • Flash size and the over the air update path, because the part boots from external serial flash and the image has to fit.

Which projects this part fits

This part fits cloud connected sensors and meters, home automation hubs and appliances, access control and security panels, connected audio products, IP network sensor nodes, smart plugs and industrial control gateways. It also fits products where the team has no Wi-Fi experience, because the network side is a finished stack with a documented socket interface rather than a radio that has to be driven. Customers building a product that has to be commissioned by phone use the provisioning modes in ROM, which remove a screen and a keypad from the bill of materials.

Questions that come up before a purchase order is released

Does the part need an external flash?

Yes. The CC3200 boots from an external serial flash through a dedicated SPI interface, and the application image lives there. That flash is part of the bill of materials and part of the hibernate current, because it has to be put into deep power down with the rest of the system. The size is set by the application image plus the update image, and the part does not run without a programmed flash.

Can it work as an access point?

Yes, in access point mode, and in Wi-Fi Direct mode for a peer to peer link. That is how a product without a screen is commissioned: the phone joins the access point the product creates, the credentials are handed over, and the product joins the customer network as a station. The mode is a firmware setting and the radio supports it in the same package.

What is the practical range?

At 18 dBm in DSSS and minus 95.7 dBm sensitivity the link budget is generous, but the antenna in a small product is the limit. A metal enclosure, a plastic wall and a crowded 2.4 GHz band all cut into the margin, and most products land at 20 to 40 metres indoors. The 54 Mbps OFDM mode has 20 dB less sensitivity than DSSS, so a product that needs range at high throughput is asking for something the physics does not offer.

How does the part handle TLS?

The crypto engine accelerates AES, DES, 3DES, SHA2 and MD5, and the stack supports two simultaneous TLS and SSL sockets. A product that has to talk to a cloud service uses one of them for the session and keeps the other for an update channel. The engine makes the handshake affordable on an 80 MHz core, but a product that opens and closes sessions constantly still spends noticeable energy on the cryptography.

How is the part checked at incoming inspection?

Reel and moisture bag check, marking check, and a functional test on a known good board that joins an access point and opens a socket. The radio needs a shield box or a calibrated setup for a real power measurement, so most customers test the assembled product. We keep the firmware and the flash image version with the lot, because a stack or service pack change alters the association behaviour without any change to the silicon.

How SUPERB handles this line

We supply the CC3200R1M2RGCR from original reels with lot traceability, and we confirm the packing on the order because the same code appears on both a 2500 piece reel row and a 260 piece tray row. The MCU cross reference page lists the wireless microcontroller families we carry, RF component sourcing covers the front end parts that sit around a 2.4 GHz radio, and component lead time solutions is the page to read when a build is waiting on a specific body.