Contact Us

CC2651R31T0RKPR

Brand: Texas Instruments
Texas Instruments CC2651R31T0RKPR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CC2651R31T0RKPR — Power Management & Signal Chain | Superb Automation

CC2651R31T0RKPR

Texas Instruments — Power Management & Signal Chain

Product Overview

The CC2651R31T0RKPR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CC2651R31T0RKPR single protocol 2.4 GHz wireless MCU in the 5 by 5 mm 40 pin VQFN body

The CC2651R31T0RKPR is a 2.4 GHz wireless microcontroller with an Arm Cortex M4 at 48 MHz, 352 KB of flash and 32 KB of ultra low leakage SRAM, in the 5 by 5 mm VQFN40 body with 23 GPIO. It supports Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4 and the proprietary 2.4 GHz modes, one protocol at a time, which is what the single protocol name means. The part sits between the small sensor controllers and the dual protocol devices, and its M4 core with a floating point unit is what makes it usable for a product that has to do real signal work on the node.

The reason this part exists is the ten to fifteen year product life that industrial and metering customers ask for. The flash is larger than the earlier generation, the temperature range reaches plus 105 C, and the supply window is 1.8 to 3.8 V from a single rail with an on chip buck converter. For a smart meter or a building controller that has to be supported for a decade, the part being in the vendor long life programme matters as much as any electrical figure, because a board revision in year eight costs more than the difference in unit price.

Key parameters taken from the CC2651R31T0RKPR document

ProcessorArm Cortex M4 at 48 MHz with a floating point unit, 2.91 mA active on CoreMark, 61 microamps per MHz
Memory352 KB of flash, 32 KB of ultra low leakage SRAM, and 8 KB of cache SRAM usable as general purpose RAM
Radio2.4 GHz from 2360 to 2500 MHz, supporting 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
SensitivityMinus 104 dBm on the 125 kbps Bluetooth low energy coded PHY, with receive bandwidth down to 4 kHz
Output powerUp to +5 dBm with temperature compensation, 9.5 mA in transmit at +5 dBm against 7.1 mA at 0 dBm
Receive current6.4 mA
Sleep current0.8 microamps in standby with RTC and 32 KB RAM retained, 0.1 microamps in shutdown with wake on a pin
Supply1.8 to 3.8 V single rail with an on chip buck DC to DC converter
TemperatureMinus 40 to plus 105 C
GPIO23 pins in this body, 31 pins in the 7 by 7 mm body, every digital peripheral routable to any pin
Peripherals12 bit 200 ksample per second ADC with eight channels, 8 bit DAC, four 32 bit or eight 16 bit timers, UART, SSI, I2C, I2S, AES 128 accelerator, true random number generator
BodyVQFN 40 pins, 5 by 5 mm, 0.5 mm pitch
Order code factsCC2651R31T0RKPR, VQFN RKP 40 pins, 2500 pieces on a large reel, NIPDAU finish, moisture level 3 with a 168 hour floor life, minus 40 to plus 105 C

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The M4 with a floating point unit changes what can be done on the node. A product that filters an accelerometer stream, runs a small transform or computes a threshold on a calibrated curve can do it locally instead of sending raw data, which cuts the radio duty cycle and therefore the average current. On a battery product the radio is the largest single consumer, so moving work to the core is often cheaper than moving data to a gateway. The 352 KB of flash is what allows the filter code, the stack and the application to sit together without external memory.

The 23 GPIO in this body is a working number rather than a luxurious one. A product with a display, a sensor bus, a debug port and a radio front end uses most of it. The 7 by 7 mm body with 31 pins exists for the cases that run out, and the firmware moves across because the silicon is the same. Customers who plan a product family should decide the body by the largest configuration they intend to sell, not by the first prototype.

The plus 105 C rating is the figure that separates this part from consumer wireless microcontrollers. A controller mounted inside a meter cabinet, a motor housing or a street light sees ambient temperatures that a plus 85 C part survives only on paper, and the radio current rises with temperature in a way that has to be included in the thermal budget. The buck converter helps because it dissipates less than a linear regulator, but the part still has to be laid out with a copper area under it that can carry the heat away.

The single protocol limitation is worth stating plainly because it appears in quotations. This part runs one 2.4 GHz stack at a time: Zigbee, or Bluetooth low energy, or IEEE 802.15.4, or a proprietary mode. A product that has to run a Zigbee network and a Bluetooth commissioning channel at the same time needs the dual protocol family, and a product that only needs to be commissioned over Bluetooth once and then joins a Zigbee network can normally do it with a firmware switch and a reboot. The distinction is a firmware decision, but it has to be made before the part is committed to a board.

  • Average current with the radio duty cycle the application actually uses, measured over a full reporting interval.
  • Junction temperature at the top of the ambient range, since the radio current and the buck losses both rise with temperature.
  • Flash headroom with the stack, the application and the bootloader linked together, because 352 KB is generous but not unlimited.
  • Antenna delivered power at plus 5 dBm, with the temperature compensation active, on the final board.
  • Wake latency from standby to a transmitted packet, since the 0.8 microamp standby only pays off if the wake path is short.
  • Pin count with every peripheral assigned, before the 5 by 5 mm body is committed to a production board.

Which projects this part fits

This part fits smart meters and grid infrastructure, building automation controllers, HVAC thermostats and sensors, fire detection devices, electronic shelf labels and point of sale peripherals, medical monitors that need local processing, and industrial sensors in a metal enclosure where the ambient runs hot. It also fits products that are sold with a ten year support commitment, because the flash size and the temperature range leave room for growth without a silicon change. Customers building a Zigbee product line commonly use this part at the node and a larger family member at the coordinator.

Questions that come up before a purchase order is released

Can this part run Bluetooth low energy and Zigbee at the same time?

No. It is a single protocol device, so one 2.4 GHz stack runs at a time. A product that needs concurrent operation uses the dual protocol family, where two stacks share the radio through a scheduler. A product that only needs Bluetooth for commissioning can switch stacks in firmware, which is a normal pattern for a sensor that is configured by phone and then joins a Zigbee network.

Why does the temperature range stop at 105 C?

Because that is the grade the vendor qualifies and the grade the electrical tables are written at. Operation above that is outside the published window and the radio behaviour is not guaranteed. A product that sees higher ambient has to move the heat away from the part or choose a different family, and the thermal resistance of the 5 by 5 mm body is the number that decides how much copper is needed under it.

What is the difference between this body and the 7 by 7 mm part?

Eight pins and a larger thermal pad. The silicon, the radio, the memory and the current figures are the same. The larger body is easier to route, has a better thermal path and carries 31 GPIO, while the 5 by 5 mm body saves board area. Both are in the same family and the same SDK, so a firmware image moves with a pin map change.

Does the part need an external crystal?

It needs a 48 MHz crystal or an external clock for the radio and a 32.768 kHz crystal for the low frequency clock. The 48 MHz source decides the radio frequency accuracy and therefore the compliance margin at the band edges, and the 32.768 kHz source decides the sleep clock accuracy, which sets how often the device has to resynchronise. Both are part of the RF bill of materials and both belong in the tolerance budget.

How is the part checked at incoming inspection?

Reel and moisture bag check, marking check, and a functional join and report test on a known good board. The radio needs a shield box for a real measurement, so the practical screen is a connect and range test against a reference unit. Because the part runs from 1.8 to 3.8 V, the test should also cover the low end of the supply window, where the buck converter behaves differently from the nominal 3.3 V case.

How SUPERB handles this line

We supply the CC2651R31T0RKPR and the 7 by 7 mm body of the same family from original reels with lot traceability, and we confirm the body letter on the order because the two packages differ by one character in the part number. The MCU cross reference page lists the wireless families we carry with their package and temperature options, RF component sourcing covers the matching and front end parts around a 2.4 GHz radio, and component lead time solutions is the page to read when a build is short of a specific body.