CC1312PSIPMOTR
Product Specifications
CC1312PSIPMOTR
Texas Instruments — Power Management & Signal Chain
Product Overview
The CC1312PSIPMOTR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
CC1312PSIPMOTR: a sub 1 GHz system in a package with the certification done
CC1312PSIPMOTR is a wireless system in a package: a Cortex-M4F core at 48 MHz, 352 kilobytes of flash, 80 kilobytes of SRAM, the radio, the crystals, the DC to DC converter and the matching network, all inside a 7 mm by 7 mm package with 30 general purpose pins. The suffix MOTR is that package on a large reel.
What makes it different from a discrete wireless microcontroller is the word certified. The module carries FCC part 15 and ISED certification as a module, which means a product built around it does not need its own radio certification in the United States and Canada, provided the antenna and the enclosure rules in the module grant are respected. For a product with a nine month schedule that is the single largest item on the critical path, removed.
The radio reaches minus 119 dBm in long range mode at 2.5 kbps and minus 108 dBm at 50 kbps in the 802.15.4 arrangement, with output power up to plus 20 dBm. The receive current at 868 MHz is 5.8 mA, the transmit current is 28.7 mA at plus 14 dBm and 62 mA at plus 19 dBm. Those are the numbers that decide the battery and the thermal plan.
What the package removes and what it does not
The package contains both crystals: a 48 MHz reference with 10 ppm accuracy over temperature and a 32 kHz crystal for the real time clock with 50 ppm. It also contains the DC to DC converter components, the decoupling and a single 50 ohm RF pin. A discrete build has all of those as external parts, each with a tolerance, a placement rule and a line item.
What it does not remove is the antenna. The module grant covers a specific antenna arrangement, and a product that uses a different antenna needs either a new certification or a grant that permits it. That is the one item on the radio side that a product team still has to plan, and it is where schedules slip.
The second thing it does not remove is the enclosure. A plastic housing with a metalized coating, a metal lid or a battery in the wrong place will change the antenna performance, and a module certification that was granted with the antenna in free space does not automatically cover a product where it is not.
| Function | sub 1 GHz wireless system in a package |
| Core | Arm Cortex-M4F at 48 MHz |
| Flash | 352 kilobytes |
| ROM | 256 kilobytes for protocols and library functions |
| SRAM | 80 kilobytes with parity, plus 8 kilobytes of cache |
| Radio | 2-FSK, 4-FSK, GFSK, MSK and OOK, plus 802.15.4 |
| Sensitivity | minus 119 dBm at 2.5 kbps long range |
| Sensitivity, 802.15.4 | minus 108 dBm at 50 kbps at 868 MHz |
| Output power | up to plus 20 dBm with compensation |
| Receive current | 5.8 mA at 868 MHz |
| Transmit current | 28.7 mA at plus 14 dBm, 62 mA at plus 19 dBm |
| Supply range | 1.8 V to 3.8 V |
| Crystals | 48 MHz at 10 ppm and 32 kHz at 50 ppm, both inside |
| Certification | FCC part 15 and ISED certified as a module |
| Package | MOT body, 7 mm by 7 mm, 30 general purpose pins |
| Carrier | large tape and reel |
| Operating range | minus 40 to plus 105 with the 14 dBm amplifier |
The twenty decibel amplifier and the thermal bill
Plus 20 dBm is 100 milliwatts, and at 915 MHz the part draws 86 mA to produce it. In a 7 mm package with the radio, the crystals and the converter all inside, that current turns into heat in a very small volume, and the document prints two operating ranges for exactly that reason: minus 40 to plus 105 with the 14 dBm amplifier and minus 40 to plus 95 with the 20 dBm one.
The five degree difference is not a detail. A gateway mounted in a metal enclosure on a pole in a hot climate is already at 60 degrees internal, and a 20 dBm transmit duty cycle can add another 25. A product that picks the 20 dBm setting for range and then discovers the thermal limit at qualification has to either reduce the duty cycle or move to the 14 dBm setting and a better antenna.
In practice the 14 dBm setting with a good antenna outperforms the 20 dBm setting with a poor one, and it produces half the heat. That is the trade we recommend a customer evaluate before the enclosure is fixed.
Certification as a product feature
A module certification is granted to the module, not to the product, and it comes with conditions: the antenna type and gain, the separation from the user, the label wording. A product that follows those conditions inherits the certification. A product that departs from them does not, and the departure is usually accidental.
The label is the most common departure. A module grant requires the host product to carry a statement that it contains a certified module, and a product that prints its own FCC mark without that statement is not covered. The document prints the required wording, and it is worth handing to the mechanical and label team on day one.
The second is the antenna gain. A module certified with a 2 dBi antenna is not certified with a 5 dBi one, even if the radio is the same, because the effective radiated power changes. A product that swaps the antenna for a longer one for range is outside the grant.
Our MCU cross reference page covers the wireless module and microcontroller families we hold, and the RF component sourcing page describes the traceability we keep for module lots.
Where a certified module changes the schedule
The document lists smart meters for water, gas, electricity and heat cost allocation, 868 and 902 to 928 MHz systems with receive bandwidth down to 4 kHz, grid communications, building automation and security, EV charging, solar micro inverters, HVAC, factory automation, fire safety and medical telemetry.
The meter segment is the largest, and it is the one where certification cost dominates at low volume. A utility meter in a pilot of five thousand units cannot absorb a full radio certification, so a module with the certification already granted is the difference between a pilot and no pilot.
The EV charging and solar segments are the second fit, and there the long range mode matters. A charge point in a parking structure has to reach a gateway through concrete, and minus 119 dBm at 2.5 kbps buys the link margin that a faster mode does not.
The thirty general purpose pins are the other reason this package is used on a gateway rather than on a sensor. A gateway needs an Ethernet port, a second serial port for a local console, a few LEDs, a tamper input and a connector for the antenna. That is more than ten pins before the radio is counted, and the MOT body is the smallest member of the family that carries them.
That is also why the module approach is usually chosen by teams that are new to radio rather than by teams that have done it before. The experienced team knows what the certification costs and plans for it; the new team discovers it and the module removes the discovery.
Three questions buyers ask about this string
Do we still need our own radio test? Not for FCC or ISED if the antenna and label conditions are met. Other markets have their own rules and the module grant may not cover them.
Is it pin compatible with the 2.4 GHz system in a package? Yes, the document states pin compatibility with the CC2652 members of the family, which is what lets one board carry either radio.
Does the 20 dBm setting need an external amplifier? No, it is inside. What it needs is a thermal plan and a supply that can deliver the current.