BQ7790512PWR
Product Specifications
BQ7790512PWR
Texas Instruments — Power Management & Signal Chain
Product Overview
The BQ7790512PWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
BQ7790512PWR: a low power protector with the option table doing the work
The BQ7790512PWR belongs to the BQ77904 and BQ77905 family, a protector for packs from three to twenty cells in series that also watches current and temperature. The 12 option is one line in a long comparison table, and that table is the part. Thresholds, delays, hysteresis and recovery behaviour are all fixed by the option code, so the same silicon covers a wide spread of pack specifications.
In normal operation the part draws 6 microamps. That figure is the reason it exists in the form it does: a pack that sits on a shelf for a year cannot afford a protector that drains it, and a protector that is switched off cannot protect anything. Everything else in the part is arranged around staying alive at that current.
Protection covers overvoltage from 3 V to 4.575 V, undervoltage from 1.2 V to 3 V, two discharge overcurrent points, a short circuit point, charge overcurrent, and over and under temperature for both charge and discharge. Voltage accuracy is plus or minus 10 mV; the current comparators are looser because they work on small sense voltages.
Key data for the BQ7790512PWR
| Function | Voltage, current, temperature and open wire protection with FET drivers |
| Cell count | 3 to 20 cells in series, extended by stacking devices |
| Overvoltage range | 3 V to 4.575 V, value fixed by the option |
| Undervoltage range | 1.2 V to 3 V, value fixed by the option |
| Voltage accuracy | Plus or minus 10 mV |
| Current protection | Discharge level 1, discharge level 2, short circuit, charge overcurrent |
| Current accuracy | Plus or minus 20 percent at or below 20 mV, plus or minus 30 percent above |
| Temperature | Charge and discharge, over and under, two settings each |
| FET drive | Independent low side NMOS drivers for charge and discharge |
| Supply current | 6 microamps normal mode |
| Package | 20 pin TSSOP, 6.50 mm by 4.40 mm |
| Temperature range | Minus 40 to 85 C operating |
| Ordering | BQ7790512PWR, large tape and reel |
Reading the option table without getting it wrong
Two parts in this family can share a package, a pinout and a price, and differ only in the undervoltage point or the recovery behaviour. On paper they are interchangeable. On a pack they are not, and the difference shows up as a product that cuts off early or refuses to charge.
The safe process is to build a small table of the five numbers that matter for the pack: overvoltage threshold, undervoltage threshold, overcurrent level, the delay on each, and whether the pack recovers by itself. Then match those against the option list before the part number is written into the bill of material. The option code is not a version number, it is the specification.
There is a second trap in the revision history. Thresholds inside one option have been changed by a silicon revision, so a part number that worked in a build five years ago may now come with a different undervoltage delay. A re qualification of a long running pack should start by reading the revision history rather than the first page.
Stacking several devices into one pack
For packs above twenty cells the family is extended by stacking, with the charge and discharge outputs of one device wired into the control inputs of the device below. The charge path is then controlled by the highest device in the chain that has seen a fault, and the whole string turns off together.
Each stage adds a level shift between two voltage domains. Those level shifts are resistors and clamps, and they are the parts that fail in a way nobody notices until the pack misbehaves in the field. A service procedure that measures the control signals between stages is worth more than any protection feature added on top.
The other stacking question is group boundaries. A device covers a fixed number of cells, and the boundary should fall where the harness is short and the cells are on the same board or in the same block. A boundary across a long connector turns a sense wire fault into a protection event that cannot be explained.
Where it fits in a build
This family is used in e bike packs, light electric vehicle packs, power tool packs and small energy storage. It suits products where a monitor is optional but protection is not, because current and temperature protection are inside the same part as the voltage comparators.
Because the option code carries the specification, cross referencing is not a matter of finding a part with the same function. A second source or a replacement has to match the thresholds line by line, and the power management cross reference page sets out how we compare two parts on the numbers that change behaviour rather than on the package alone.
The sourcing side of this part is covered on the incoming inspection plan. For a part where the option code carries the specification, that page covers the checks we run at the receiving dock.
Questions we get on this code
Can the thresholds be programmed in the pack? No. This family has no memory and no bus. A pack that needs adjustable thresholds needs a monitor with registers, and that is a different part with a different current draw.
Does the part protect the FETs during a short circuit? It turns them off, and the delay is set by the option. Whether the FETs survive depends on their safe operating area and on the loop inductance, both of which are outside the protector.
Why is the current accuracy so wide? Because the comparator works on a sense voltage of tens of millivolts, where the offset of the amplifier is a large fraction of the signal. A tighter current limit needs a larger sense resistor, not a different part.
How does the pack recover after an overtemperature event? By itself, once the temperature comes back inside the window and the delay has elapsed. Nothing latches, so a pack that is left in a hot vehicle will resume charging when it cools, which may not be what the product intends.