BQ26500PWR
Product Specifications
BQ26500PWR
Texas Instruments — Power Management & Signal Chain
Product Overview
The BQ26500PWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
BQ26500: a coulomb counting gauge that needs no processor
The BQ26500PWR is a single cell Li-ion and Li-polymer gas gauge from the bqJUNIOR family. It reports state of charge, cell voltage and cell temperature over a single wire HDQ bus at 5 kbits per second, and it does the counting itself. There is no host algorithm, no chemistry model to run and no calibration routine to write.
The method is coulometric: a sense resistor in series with the pack, an integrating converter across it, and automatic offset cancellation so the integrator does not drift with temperature and time. It also needs no external crystal, because the time base is internal. On a small pack with a low cost host, those two omissions are the difference between a gauge and a gauge plus four components.
Four automatic low power modes move the part between full measurement and a standby state as the current changes, so the gauge itself does not become the load that shortens the runtime it is measuring.
Key data for the BQ26500PWR
| Function | Single cell coulometric battery gas gauge, bqJUNIOR family |
| Reporting | State of charge, cell voltage, cell temperature, available capacity |
| Method | Coulometric charge and discharge integration with automatic offset cancellation |
| Calibration | No offset calibration required |
| Time base | Internal, no external crystal |
| Interface | HDQ single wire, 5 kbits per second |
| Power modes | Four automatic low power operating modes |
| I/O | One programmable input or output port |
| Package | TSSOP, 8 pins, PW body, marking 26500 |
| Temperature | 0 to 70 C operating |
The other limit is the sense resistor value. A larger resistor gives a better signal and wastes more power; the document recommends a value and the accuracy figures are quoted against it. Changing that value without changing the configuration scales every reading, and a pack that reports 8 per cent low is usually a resistor change rather than a gauge fault.
Body and ordering data
Two rows: BQ26500PW in a 100 piece tube and BQ26500PWR at 2000 pieces on a large tape and reel, both TSSOP PW with 8 pins, NIPDAU finish, moisture level 2 with a one year floor life, 0 to 70 C, marking 26500. The 0 to 70 C window is the commercial grade, and it is the number that rules this part out of most industrial work today.
This is an old document, revised in 2003, and the part is kept in production for platforms that already specify it. A new build should look at the CEDV gauges instead, because the algorithm and the tooling have moved on by two generations.
What coulomb counting does not do
Counting charge in and out gives a state of charge that is accurate until the pack ages. As the cell loses capacity, the counter still believes the original number, so a pack at 70 per cent of its original capacity will report full until it collapses. The gauge reports voltage and temperature as well, and the host is expected to use those to correct the model. A product that only reads the percentage will drift over the life of the pack.
Offset is the other failure mode, and it is why the automatic cancellation matters. A microvolt of offset in the sense amplifier, integrated over a week of standby, is a state of charge error of several per cent. The cancellation runs in the part rather than in a calibration step, which is what allows a pack maker to ship without a bench calibration.
Where it fits in a build
PDAs, phones, media players, cameras and handheld instruments built around a single cell, where the host has no room for a fuel gauge algorithm. The memory cross reference page lists the gauges and the identification parts we compare when a platform is being refreshed.
A new build in 2026 should not start here. The CEDV parts in the same catalogue give a better aged pack model, a faster bus and an industrial temperature range for the same board area.
The sourcing side of this part is covered on the obsolete part cross reference hub. For a platform still built around this gauge, that page covers the replacements we compare on bus, sense value and temperature grade.
Questions we get on this code
Does it need a sense resistor? Yes, and its value sets the resolution. the document gives the recommended value and the routing rule for the differential pair.
Can the host read it while the pack is charging? Yes, the HDQ bus is independent of the charge state.
Is 0 to 70 C a real limit? It is the rated operating window. A pack that sees 85 C in a vehicle will be outside the specification even though the part may still function.
Is the programmable port useful? It gives one GPIO over the same bus, which on a small host is often the only spare pin available.