Contact Us

BQ24073RGTR

Brand: Texas Instruments
Texas Instruments BQ24073RGTR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ24073RGTR — Power Management & Signal Chain | Superb Automation

BQ24073RGTR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ24073RGTR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ24073RGTR: 1.5 A single-cell linear charger with power path

BQ24073RGTR is a standalone single-cell lithium charger with a system power path in a VQFN body of 16 pins. It charges one cell at up to 1.5 A from a USB or adapter input, selects a 100 mA or 500 mA input limit for USB compliance, adds input-based dynamic power management for weak sources, and powers the system while it charges.

Order code and package

Ordering stringBQ24073RGTR, RGT package, tape and reel
Package16-pin VQFN, 3.00 mm by 3.00 mm
FamilyBQ24072, 73, 74, 75 and 79 differ in termination, status and current options
Cell countOne lithium-ion or lithium-polymer cell
InputUSB port or a 5 V adapter, with detection of a weak source

Electrical parameters that decide the application

Charge currentUp to 1.5 A, set by an external resistor
USB input limit100 mA or 500 mA, selected by a pin
Input current limitProgrammable up to 1.5 A on the wider family members
Power pathSystem output stays powered while the battery charges
ProtectionInput overvoltage, input-based dynamic power management, thermal regulation
TerminationCurrent-based, with a programmable level on the family members that offer it

Points to check before this part goes on a BOM

The 100 mA and 500 mA input limits exist because a USB port is not a power supply. A host port promises 500 mA and a configured port promises more, and a charger that pulls 1.5 A from an unconfigured port collapses the bus and takes the host down with it. The pin that selects the limit is therefore a system decision that has to be made before enumeration, and getting it wrong shows up as a host that resets when a phone is plugged in.

Input-based dynamic power management is the second line of defence. When the input voltage falls because the source cannot supply the programmed current, the charger reduces its own draw instead of letting the rail collapse. That behaviour is what makes a cheap 1 A adapter usable at 500 mA without a negotiation protocol, and it is invisible until the adapter is weak.

DPPM is a different loop with a similar purpose: it watches the system output and reduces charge current when the system load pulls the output down. A product that runs a display, a radio and a processor from the same power path can draw more than the input allows, and the battery has to make up the difference. DPPM decides how much of the input goes to the system and how much to the battery, and the threshold is what keeps the system from browning out.

A linear charger at 1.5 A dissipates what the input voltage exceeds the cell voltage, and that is the number that decides the package. Charging a 3.7 V cell from 5 V at 1.5 A is 1.95 W inside a 3 mm by 3 mm body, which the thermal regulation loop will not allow for long: it reduces the current to hold the die at its limit. The 1.5 A rating is reachable at the start of a charge from a deeply discharged cell and not near the top of the charge.

Termination on a lithium cell is a current threshold at a fixed voltage, and it has to be low enough to be safe and high enough not to extend the charge forever. The family members with a programmable termination let the threshold follow the cell capacity; the ones without it use a fixed fraction, which is fine for a nominal capacity and wrong for a cell half that size.

The power path is what lets a product work with no battery at all. The system output is fed from the input through a pass element while the battery charges, so a device with a dead or missing cell still boots when it is plugged in. That behaviour is a product requirement far more often than it is a battery requirement, and it is the reason to choose a part with a power path rather than a plain charger.

The current-set resistor value in this family changed in a later revision of the data sheet, from 3 kilohm to 8.9 kilohm in the pin description, which is a reminder that a circuit copied from an older printout can program the wrong current while every part on the board is correct. The charge current, the termination level and the input limit all come from resistor values, and those values have to be read from the revision that matches the silicon in hand rather than from a saved drawing.

Where this order code fits

It fits a handheld instrument, a portable speaker, a barcode reader or a small medical device, where a single cell charges from USB and the product has to run while charging. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the BOM Shortage Recovery page.

Questions buyers ask

Does this part negotiate with the USB host? No. It applies a fixed 100 mA or 500 mA limit selected by a pin, and it protects itself against a weak source. Enumeration and higher current levels need a controller or a host-side protocol, and the family members with programmable limits are the ones to compare.

Can the system run with the battery removed? Yes, the power path feeds the system from the input. The system sees the input voltage minus the path drop, so the downstream regulator has to accept a slightly lower rail than the adapter provides.

Why does the charge current fall before the cell is full? Thermal regulation. A linear charger at high current in a small body reaches its thermal limit and reduces current to stay inside it. That is normal behaviour, not a fault, and it is why the current rating is not the same as the current delivered for the whole charge.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.