STM32F103 Mainstream MCUs for Industrial Control Boards
Product Specifications
Product Overview
The STM32F103 is the part that most industrial control boards were designed around in the last fifteen years, and a very large number of those boards are still in production. The 72 MHz Cortex-M3 core, the five USARTs, the three 12-bit ADCs and the CAN interface cover most control, meter and interface product requirements without an external peripheral, and the part is still specified for new designs where the firmware is already written.
The family is organised by Flash size, memory and package: 64 kB and 128 kB parts with 20 kB of SRAM, 256 kB parts with 48 kB, and 384 kB to 512 kB parts with 64 kB, plus the XL-density parts at 768 kB and 1 MB. Reading the package code correctly matters, because the same Flash size is offered in LQFP48, LQFP64, LQFP100 and LQFP144 with a different I/O count and a different peripheral set.
All models are grouped into this single product, so you can send one list covering a product family with several board variants and receive one quote with the package and Flash size of each line.
Electrical Specifications
| Parameter | STM32F103 specification |
|---|---|
| Core | Arm Cortex-M3 32-bit RISC, 72 MHz maximum, 1.25 DMIPS/MHz, single cycle multiply and hardware divide |
| Flash and SRAM | 64 kB to 512 kB Flash (medium and high density), 768 kB to 1 MB on XL-density parts; 20 kB, 48 kB or 64 kB SRAM depending on density |
| ADC | 2 or 3 x 12-bit ADC, 1 us conversion, up to 21 channels, triple sample and hold |
| DAC | 2 x 12-bit DAC on the high density parts |
| Timers | Up to 11 timers, including 2 x 16-bit motor control PWM timers with dead time generation and emergency stop |
| Communication | Up to 5 USARTs, up to 3 SPIs (18 Mbit/s), up to 2 I2C, CAN 2.0B Active, USB 2.0 full speed, SDIO |
| Supply and clock | 2.0 V to 3.6 V application supply, 4 to 16 MHz crystal, internal 8 MHz RC, 32 kHz oscillator for RTC |
| Packages | LQFP48, LQFP64, LQFP100, LQFP144, VFQFPN36, BGA100 and BGA144 |
| Temperature range | -40 C to +85 C, with -40 C to +105 C parts available in the same family |
Included Models and Order Codes
The order code carries the package, the Flash size and the temperature range, so please send the complete string. The list below shows the variants requested most often and what changes between them.
| Model | Flash | SRAM | Package | Notes |
|---|---|---|---|---|
| STM32F103C8T6 | 64 kB | 20 kB | LQFP48 | Compact boards and interface adapters |
| STM32F103CBT6 | 128 kB | 20 kB | LQFP48 | Same footprint as the 64 kB part with more Flash |
| STM32F103C6T6A | 32 kB | 10 kB | LQFP48 | Entry version, small control tasks |
| STM32F103R8T6 | 64 kB | 20 kB | LQFP64 | General control boards |
| STM32F103RBT6 | 128 kB | 20 kB | LQFP64 | Most common LQFP64 density |
| STM32F103RCT6 | 256 kB | 48 kB | LQFP64 | High density part with 3 ADCs and 2 DACs |
| STM32F103RET6 | 512 kB | 64 kB | LQFP64 | High density, larger firmware and file systems |
| STM32F103RFT6 | 768 kB | 96 kB | LQFP64 | XL-density part for larger applications |
| STM32F103RGT6 | 1 MB | 96 kB | LQFP64 | Largest density in the LQFP64 package |
| STM32F103VBT6 | 128 kB | 20 kB | LQFP100 | More I/O for interface and I/O modules |
| STM32F103VCT6 | 256 kB | 48 kB | LQFP100 | High density with full peripheral set |
| STM32F103VET6 | 512 kB | 64 kB | LQFP100 | High density with the most I/O in this group |
| STM32F103ZET6 | 512 kB | 64 kB | LQFP144 | Boards that need the full I/O count and external memory bus |
| STM32F103T8U6 | 64 kB | 20 kB | VFQFPN36 | Space constrained boards without the CAN requirement |
Key Features
Long Term Availability Focus – A part that has been in production for many years and is still available, which matters more than a performance increase for a board that is already certified.
Package And Density Ladder – The same code base scales from LQFP48 with 64 kB to LQFP144 with 512 kB, so one firmware image can serve several board variants.
Peripherals For Control Boards – CAN 2.0B, five USARTs, three SPIs, USB and SDIO on chip, which keeps the interface hardware to a minimum.
Motor Control Timers – Two advanced timers with dead time generation and emergency stop for PWM drives and servo outputs.
Analog On Chip – 12-bit ADC with up to 21 channels and dual 12-bit DACs on the high density parts.
Wide Temperature And Supply Range – 2.0 V to 3.6 V operation and -40 C to +105 C options for outdoor and industrial equipment.
Repair And Existing Design Support – Board level repair quantities supplied alongside production quantities, which is normal for equipment with a ten year service life.
Applications
Typical boards built on this family: Control boards built on this family are usually quoted together with the SUPERB PCB and SUPERB PCBA work we support, so the processor, the interface parts and the assembly arrive as one line.
Industrial Control And Automation – PLC modules, I/O cards, drives and machine control boards with CAN or serial interfaces.
Measurement And Instrumentation – Data loggers, meters and sensor interfaces using the on chip ADC with external signal conditioning.
Motor And Actuator Control – Brushless motor control and positioning stages using the advanced timers and the CAN interface.
Interface Converters And Gateways – Protocol converters between CAN, RS-485, USB and Ethernet, and gateway boards that need several serial ports.
Sourcing and Cross-Reference
Because the STM32F103 family has been copied more than almost any other microcontroller in this market, the risk of receiving a re marked or non conforming part is real. We source through established supply channels, state the marking and the condition on the quote, and can quote sealed original stock for production where a customer qualification process requires it.
Movement between densities inside the family is the most useful kind of substitution here: 64 kB to 128 kB and 256 kB to 512 kB parts share the peripheral set and often the package, so a larger Flash part can keep a line running when the exact density is short. Where the package changes, we say so, because that means a new layout rather than a substitution.
Where the control board is assembled in volume, SUPERB Assembly support covers the SMT build.
Q: Can you supply a drop-in replacement when the exact STM32F103 order code is out of stock?
A: Yes. Send the complete order code and the quantity and the SUPERB Tech sales team will reply with availability, marking information and the nearest density in the same package.
Why Source STM32F103 MCUs from Superb Automation?
- Mainstream MCU Focus: The STM32 families most used on industrial, medical and telecom boards, quoted with the package and Flash size of the exact order code.
- Density And Package Substitution: Alternatives inside the family listed with the peripheral and pin out differences made explicit.
- Counterfeit Risk Control: Marking, condition and packing stated on the quote, with sealed original options for qualification sensitive builds.
- Repair Quantities: Small quantities for service and repair supplied from the same stock as production orders.
- Supporting Parts Together: Crystals, CAN transceivers, flash and power parts for the same board quoted on one line so your BOM arrives complete.
- Straight Answers On Availability: If a part is on allocation or obsolete we say so in the first reply and propose the options, rather than taking the order and waiting.
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: MCU and Embedded Processors, Multi-Function ICs, Power Management ICs, Components.