FPGA and CPLD Chips for Industrial and Telecom Boards
Product Specifications
Product Overview
Programmable logic stays in production far longer than the process it was built on, and that is the practical problem behind most FPGA sourcing requests. A board designed around a mid range device in 2014 is still shipping, the configuration memory may already be programmed for that device, and changing to the current equivalent means a new bitstream, new timing closure and sometimes a new board revision. Keeping the original part available is usually cheaper than replanning the design.
The families on this page cover the two ends of that market. The small CPLDs handle glue logic, address decoding, level shifting and interface expansion where a few hundred macrocells are enough and no external configuration memory is needed. The FPGA families cover industrial control, telecom line cards and instrumentation where block memory, DSP slices and high speed serial links set the limit.
All models are grouped into this single product, so a board can be quoted with the programmable device, its configuration memory and the power sequencing parts in one line. Tell us the logic size, the package, the speed grade and the temperature grade on the existing build, and the exact order code can be matched against the one in the drawing.
Key Specifications
| Parameter | FPGA Families | CPLD Families |
|---|---|---|
| Logic capacity | 2,000 to 326,080 logic cells or logic elements | 64 to 570 macrocells |
| Block memory | 270 Kb to 16,020 Kb of block RAM | Up to 8,192 bits of user flash for the design |
| Arithmetic blocks | DSP slices from 15 to 840, 18 x 18 or 25 x 18 multipliers | Not applicable, logic based arithmetic |
| Configuration | External SPI flash or parallel flash loading | Non volatile on chip, instant on at power up |
| Packages | TQFP-144, CSG324, FGG484, FFG676, FFG900, BG256, EQFP-144 | TQFP-100, VQFP-44, QFN |
| Speed grades | -1, -2, -3 for Xilinx, 6, 7, 8 for Intel, 6, 7 for Lattice | -5, -7, -10 |
| Supply | Core 0.9 V to 1.2 V with 1.8 V, 2.5 V and 3.3 V capable IO banks | 1.8 V and 3.3 V cores, 3.3 V IO |
| Temperature grades | Commercial, industrial and automotive | Commercial and industrial |
Included Models and Order Codes
The table lists the programmable logic devices most often requested for existing industrial and telecom boards. Send the complete order code including the package code, the speed grade and the temperature grade and we confirm availability against that exact string.
| Model | Family | Logic | Memory and Blocks | Package | Speed and Grade |
|---|---|---|---|---|---|
| XC7A35T-1CSG324C | Artix-7 | 33,280 logic cells | 1,800 Kb block RAM, 90 DSP slices | CSG324 BGA | -1 speed grade, commercial |
| XC7A50T-1CSG324C | Artix-7 | 52,160 logic cells | 2,700 Kb block RAM, 120 DSP slices | CSG324 BGA | -1 speed grade, commercial |
| XC7A100T-2FGG484C | Artix-7 | 101,440 logic cells | 4,860 Kb block RAM, 240 DSP slices | FGG484 BGA | -2 speed grade, commercial |
| XC7A200T-2FBG484C | Artix-7 | 215,360 logic cells | 13,140 Kb block RAM, 740 DSP slices | FBG484 BGA | -2 speed grade, commercial |
| XC7K160T-2FFG676C | Kintex-7 | 162,240 logic cells | 11,700 Kb block RAM, 600 DSP slices | FFG676 BGA | -2 speed grade, commercial |
| XC7K325T-2FFG900C | Kintex-7 | 326,080 logic cells | 16,020 Kb block RAM, 840 DSP slices | FFG900 BGA | -2 speed grade, commercial |
| XC6SLX9-2TQG144C | Spartan-6 | 9,152 logic cells | 576 Kb block RAM, 16 DSP slices | TQFP-144 | -2 speed grade, commercial |
| XC6SLX16-2CSG324C | Spartan-6 | 14,579 logic cells | 576 Kb block RAM, 32 DSP slices | CSG324 BGA | -2 speed grade, commercial |
| XC6SLX45-2FGG484C | Spartan-6 | 43,661 logic cells | 2,088 Kb block RAM, 58 DSP slices | FGG484 BGA | -2 speed grade, commercial |
| EP4CE6E22C8N | Cyclone IV E | 6,272 logic elements | 270 Kb M9K memory, 15 multipliers | EQFP-144 | speed grade 8, commercial |
| EP4CE10F17C8N | Cyclone IV E | 10,320 logic elements | 414 Kb M9K memory, 23 multipliers | FBGA-256 | speed grade 8, commercial |
| EP4CE22F17C6N | Cyclone IV E | 22,320 logic elements | 594 Kb M9K memory, 66 multipliers | FBGA-256 | speed grade 6, commercial |
| 10M08SAU169C8G | MAX 10 | 8,000 logic elements | Integrated flash configuration, single supply | UBGA-169 | speed grade 8, commercial |
| 10M50DAF484C7G | MAX 10 | 50,000 logic elements | Integrated flash configuration, ADC blocks | FBGA-484 | speed grade 7, commercial |
| 5CEFA2F23I7N | Cyclone V E | 25,000 logic elements | M10K memory blocks, variable precision DSP | FBGA-484 | speed grade 7, industrial |
| EPM240T100C5N | MAX II CPLD | 240 logic elements | 8,192 bits user flash | TQFP-100 | speed grade 5, commercial |
| EPM570T100C5N | MAX II CPLD | 570 logic elements | 8,192 bits user flash | TQFP-100 | speed grade 5, commercial |
| XC9572XL-10TQG100C | XC9500XL CPLD | 72 macrocells | 1,600 usable gates, 3.3 V core and IO | TQFP-100 | speed grade 10, commercial |
| XC2C64A-7VQG44C | CoolRunner-II CPLD | 64 macrocells | 1.8 V core with 3.3 V tolerant IO | VQFP-44 | speed grade 7, commercial |
| LFE5U-25F-6BG256C | ECP5 | 24,000 LUT4 elements | 1,008 Kb embedded block RAM, 28 DSP blocks | caBGA-256 | speed grade 6, commercial |
Key Features
Order Code Matching – Package code, speed grade and temperature grade are checked letter by letter against the drawing, because a different package letter is a different part even when the die is the same.
Industrial And Automotive Grades – I and A grade devices for equipment that has to run at -40 C or in an engine bay, not only the commercial grade that dominates distribution stock.
Small CPLD Substitutes – Where a glue logic device is obsolete, the nearest live CPLD with the same macrocell count and package is quoted with the pin out difference stated.
Configuration Memory Together – Configuration flash for the FPGA and the power sequencing parts are quoted on the same line as the device itself.
BGA Inspection Support – Devices are supplied with the moisture sensitivity level and the packing stated, so the assembly process can be planned for a reflow profile that suits the package.
Programmed And Unprogrammed Options – Unprogrammed parts for normal build, or devices from stock with their previous programming stated, which matters when a board is being repaired rather than built.
Long Lifecycle Sourcing – Mature families are kept available for platforms that stay in service after the vendor has moved to a newer process.
Applications
Boards where these devices are specified: Programmable logic is normally quoted with the SUPERB PCB and SUPERB PCBA work we support, so the device, the configuration memory and the assembly are handled as one order.
Industrial Control And Motion – Machine control, motion and vision boards that need deterministic parallel logic next to a processor.
Telecom And Networking Line Cards – Line cards and interface boards where high speed serial links and block memory set the device class.
Test And Measurement Instruments – Instrument front ends and acquisition boards that need a reconfigurable data path and a long production life.
Legacy Platform Continuation – Existing boards kept in production where the original device has to be found rather than redesigned.
Sourcing and Cross-Reference
Programmable logic is the hardest family to substitute because the configuration data is tied to the device. Moving to a different density, speed grade or package code normally means regenerating the bitstream and repeating timing closure, and in a regulated product it may also mean re validation. That is why the first question on this family is always whether the exact order code is available rather than which device is nearest.
We check the requested code against the vendor lifecycle status, the distribution pipeline and the secondary market, and we state whether the parts are new and sealed or pulled and tested. Where the code is no longer available, the options are spelled out: the same die in another package, the next density up or down with the implications for the bitstream, or a CPLD substitute where the function is small enough.
For volume builds, SUPERB Assembly support covers the SMT assembly of the board around the device.
Q: Can you confirm availability of an exact FPGA order code that has been discontinued?
A: Yes. Send the complete order code and the quantity and the SUPERB Tech sales team will confirm availability, the batch information and the nearest live density.
Why Source Programmable Logic from Superb Automation?
- Specialised Sourcing Focus: Programmable logic, RF parts and mixed signal devices for industrial, telecom, medical and defence builds, traced back to the exact order code.
- Hard To Find And Obsolete Parts: Devices that stay in demand after they leave production, sourced with the lifecycle status and the batch information stated up front.
- Cross Reference Discipline: Package, speed grade and temperature grade differences listed with the quote, including the implications for the configuration bitstream.
- Stock And Build Quantities: Single parts for repair, small quantities for a pilot build and volume orders are all welcome.
- BOM Kitting: The programmable device, the configuration memory and the power parts for the same board can be quoted together.
- Reply With Evidence: Documents, batch marking and the condition of the parts are stated on the quote before the order is placed.
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Obsolete RF Part Replacement, FPGA and Programmable Logic, BOM Shortage Recovery, MCU and Embedded Processors.