HXNM40009
Product Specifications
HXNM40009
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXNM40009 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXNM40009: eight hundred megahertz of gain matched coverage at 5.1 to 5.9 GHz
The HXNM40009 covers the whole upper 5 GHz region in one part. The vendor index row reads 5.1 to 5.9 GHz, saturated output at least 38 dBm, gain at least 18 dB, drain efficiency at least 30 per cent, 28 V drain rail, continuous wave. That is 6.31 W across 800 MHz, which is the widest window in the high gain family and the widest in this part of the catalogue.
Eight hundred megahertz at a 5.5 GHz centre is 14.55 per cent fractional bandwidth. That covers the 5.1 to 5.3 GHz WLAN block, the 5.4 GHz channels, the 5.8 GHz ISM band and the 5.85 to 5.925 GHz vehicle link allocation, all inside one amplifier. A product that has to ship into several markets can change its filter rather than its power stage.
The power budget is ordinary. At 30 per cent efficiency 6.31 W of output draws 21.0 W from the rail, which is 0.751 A at 28 V, and leaves 14.7 W of heat. The efficiency is the lowest in the family after the 20 W member, and the heat is the number the carrier has to remove.
The drive is 20 dBm, which is 100 mW. That is a packaged driver or a small discrete stage, not a modem output, so the chain has two devices rather than one. Eighteen decibels of gain at 5.5 GHz is still 6 dB more than the standard family gives on the same window.
The parameter rows Hisiwell publishes for HXNM40009
| Part class | Gallium nitride power transistor, internally matched, high gain family |
| Frequency range | 5.1 to 5.9 GHz |
| Bandwidth, calculated | 800 MHz, 14.55 per cent fractional at a 5.50 GHz centre |
| Saturation output power as published | at least 38 dBm |
| Saturation output power in watts, calculated | 6.31 W |
| Gain as published | at least 18 dB |
| Drain efficiency as published | at least 30 per cent |
| Drain voltage | 28 V |
| Flatness across the band | not published, the index prints a slash in that column |
| Operating mode | continuous wave |
| Output at 1 dB compression | not published, the index prints a slash in that column |
| DC input at saturation, calculated | 21.0 W |
| Drain current at saturation, calculated | 0.751 A at 28 V |
| Dissipation at saturation, calculated | 14.7 W |
| Dissipation if efficiency rises to 40 per cent, calculated | 9.5 W |
| Drive power for the rated output, calculated | 20 dBm, 100 mW |
| Output per 100 MHz of the band, calculated | 0.79 W |
| Load voltage at saturation into 50 ohm, calculated | 17.8 V RMS, 25.1 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text |
| Scattering parameters | not published |
| Stability data and load mismatch tolerance | not published |
| Pinch off voltage and gate bias point | not published |
| Operating and storage temperature | not published |
| Orderable addendum and packing | not published |
| Family neighbour at 33 dBm on 5.3 to 5.9 GHz | HXNM40010, same rail, 28 dB gain |
Eight hundred megahertz from an internally matched carrier
A 14.55 per cent window is where internal matching starts to cost. The gain floor drops to 18 dB, which is the lowest in the family apart from the 20 dB of the 8 to 12 GHz member, and the efficiency drops to 30 per cent. Both are the price of holding a match across 800 MHz on a single carrier.
The published power is 38 dBm, which sits between the 36 dBm and 40 dBm members on other bands. What it buys is the whole 5.1 to 5.9 GHz span without a switch, which for a test instrument or a multi band link is worth more than 2 dB of output.
The flatness is not published, and on a window this wide it is the figure that matters most. A part that holds 38 dBm at the centre and drops 2 dB at the edges is a different product from one that holds it across the band. Without a vendor number the first article has to measure it across the full span at several points.
Where the system can live inside 5.3 to 5.9 GHz, HXNM40010 covers that narrower window at 33 dBm with 28 dB of gain. Ten decibels less output, ten more decibels of gain, and a narrower match: the two parts are a pair for a product line that spans two power classes.
The 5.1 to 5.9 GHz multi band case
The 5.1 to 5.3 GHz WLAN block, the 5.4 GHz channels and the 5.8 GHz ISM band are all inside the window, and so is the 5.85 to 5.925 GHz allocation used for vehicle links. A single board covering all of them is a real advantage for a product sold into several regulatory regions.
The 6.31 W output is a sensible level for a link of a few kilometres with a directional antenna, and for an in building distributed antenna system where the last metre of coax decides the coverage. The 25.1 V peak load voltage is above the 28 V rail and inside the rating of a good SMA connector, which keeps the mechanical build simple.
For a drone data link the same window is used for the video downlink in several regions. Our drone and UAV components page covers the filters and the driver stages that sit around this part in such a link.
For a test instrument the wide window means one swept source covers the whole 5 GHz region. The flatness question then becomes the instrument's calibration problem, and a part with a known response can be corrected in software where a part with an unknown response cannot.
Thirty per cent efficiency at six watts
14.7 W of dissipation is the figure to size the carrier around. On 3 C per watt the rise is 44 C over the case and on 5 C per watt it is 74 C, so at a 70 C ambient the first sits at 114 C and the second at 144 C. Neither is a margin, which means the carrier has to be better than 3 C per watt or the ambient has to be lower.
The efficiency row is a minimum and may be conservative. If the real part runs at 40 per cent the heat falls to 9.5 W, which is a third less and changes the carrier requirement entirely. That is worth measuring before the sink is specified, and the measurement is a simple one: DC input and radio frequency output at saturation on a bench.
The drain current is 0.751 A, which is a wide trace rather than a bar, and the decoupling bank has to hold the rail through the envelope. At 30 per cent efficiency the part draws more current for the same output than the 40 dBm members do, so the feed and the supply have to be sized against 21 W rather than against 6 W of output.
Backing off 6 dB for linear operation gives 1.58 W of average output and, at an assumed 25 per cent efficiency in backoff, 4.75 W of heat. That is the operating point of a multicarrier link, and the thermal system sized for saturation is then generous.
Choosing between the upper 5 GHz members
The catalogue has several ways to cover this region. HXN40061 and HXN40062 cover 5.3 to 5.9 GHz at 37 and 40 dBm with 12 dB of gain. HXNM40009 covers 5.1 to 5.9 GHz at 38 dBm with 18 dB. HXNM40010 covers 5.3 to 5.9 GHz at 33 dBm with 28 dB.
The choice turns on three questions: how wide the window has to be, how much drive the source can provide, and how much heat the enclosure can remove. This part answers a wide window and a moderate drive with a thermal penalty, and it is the only member that reaches down to 5.1 GHz.
Where the source is a modem output at 10 dBm, HXNM40010 is the part, because 28 dB of gain needs 5 dBm and the 33 dBm output is enough for a short link. Where the window has to start at 5.1 GHz, this part is the only choice in the family.
For a replacement study the fields to compare are the rail, the mode, the band, the gain and the drive level, and the band field has to name both edges. Our pin to pin cross reference page sets out that comparison and the bench work each field implies.
Questions buyers ask about HXNM40009
Is 38 dBm enough for a 5.8 GHz link. It is 6.31 W, which with a 20 dBi antenna on each end and a 6 dB link margin gives several kilometres at a modest data rate. The link budget decides, and the amplifier is rarely the limiting part at this power.
What is the flatness across 800 MHz. Not published. On a window this wide it has to be measured, and the measurement should be at several points across the band rather than at the two edges only.
Can it run from a 12 V rail. No. The published drain rail is 28 V, and the match is built around the load line at that voltage. A 12 V system needs a boost converter, and a boost converter on the drain of a 5 GHz power stage brings its own stability questions.
How is it supplied. With no addendum, no packing column and no moisture level on the vendor page, the order names the band, the rail and the quantity. The part is held with the upper 5 GHz family through the component lead time solutions route, which covers the holding and the schedule for a multi month build.