HXC50101
Product Specifications
HXC50101
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC50101 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC50101: the 200 W row that actually carries a data sheet
The HXC50101 is a Hisiwell LDMOS RF power transistor at 200 W, single ended, unmatched, with a band edge at 800 MHz and a 50 V rail. It is the only row written in this pass whose vendor page links a document with real numbers, and that changes what can be said about it. The document on the page is titled HX510200V, not HXC50101, which is the first thing a buyer should notice.
The row, the page and the document agree on the essentials: 200 W, 50 V, HF to 800 MHz, unmatched, rugged. The document adds maximum ratings, a thermal resistance, a typical performance table across 410 to 600 MHz and a fixture drawing with a bill of materials. It does not add a pulse width, a duty cycle, a load pull table or an orderable addendum, so it is a better document than the rest of the shelf rather than a complete one.
The difference between a row with a document and a row without one is not academic. With a thermal resistance of 0.58 degrees per watt, a buyer can compute a junction temperature and argue a lifetime. With a typical performance table, a buyer can see what the part does at 500 MHz rather than what it does at the band centre the marketing figure was taken at. Both of those are missing on the 650 W and 900 W rows.
The HXC50101 rows and the document behind them
| Part class | LDMOS RF power transistor, unmatched, single ended |
| Frequency range, index row | HF to 0.8 GHz |
| Frequency range, document | HF to 800 MHz |
| Output, index row and document | 200 W |
| Output in dBm, calculated | 53.01 dBm |
| Drain rail, all three sources | 50 V nominal, 48 V in the typical table, 55 V maximum VDD |
| Drain to source maximum, document | 120 V, breakdown 122 V minimum |
| Gate to source maximum, document | Minus 10 V to plus 10 V |
| Junction temperature maximum, document | 225 degrees C |
| Case operating temperature, document | 150 degrees C |
| Storage range, document | Minus 65 to plus 150 degrees C |
| Thermal resistance, junction to case, document | 0.58 degrees C per watt, at 85 degree case, DC test |
| Gate threshold, document | 2.73 V typical at 600 microamps |
| Gate quiescent voltage, document | 3.3 V typical at 200 mA and 50 V |
| Drain leakage at 50 V, document | 1 microamp maximum |
| Gate leakage at 10 V, document | 1 microamp maximum |
| ESD class, document | Human body model class 2 |
| Typical gain across 410 to 600 MHz, document | 16.8 to 18.8 dB |
| Typical efficiency across the same band, document | 56.2 to 60.6 per cent |
| Typical drain current across the same band, document | 6.9 to 9.3 A at 48 V |
| Typical output across the same band, document | 53.0 to 54.0 dBm |
| Drive in the typical table, document | 34.9 to 36.8 dBm, about 3.1 to 4.8 W |
| Functional test at 600 MHz, document | 17 dB gain, 200 W typical, 60 per cent efficiency |
| Input return loss, document | Minus 7 dB typical |
| Package, document | Flanged ceramic, two leads, PKG-G2E |
| Fixture laminate, document | 0.762 mm, dielectric constant 3.50, Rogers 4350B, 1 ounce copper |
| Fixture class, document | Class AB, 410 to 600 MHz |
| Load voltage at 200 W into 50 ohm, calculated | 100.0 V rms, 141.4 V peak |
| Peak against the 48 V rail, calculated | 2.95 times |
| Peak at a 2 to 1 mismatch, calculated | 282.8 V |
| Heat at 60 per cent, calculated | 133.3 W |
| Junction rise at 133.3 W, calculated | 77.3 degrees C, 162.3 degrees C at an 85 degree case |
| Orderable addendum and packing | None published |
| Pulse width and duty cycle | None published |
What the thermal resistance makes possible
0.58 degrees per watt is the number the rest of this shelf does not have. At the 60 per cent efficiency in the functional test, 200 W of output leaves 133.3 W of heat, and 133.3 W across 0.58 degrees per watt is a 77.3 degree rise. With the case held at 85 degrees, which is where the vendor measures the resistance, the junction sits at 162.3 degrees against a 225 degree maximum. That is 63 degrees of margin, and margin is the only thing that turns a data sheet into a lifetime argument.
At the 55 per cent efficiency assumed on the other rows, the same 200 W produces 163.6 W of heat and a 94.9 degree rise, which puts the junction at 179.9 degrees at an 85 degree case. The margin falls to 45 degrees. That is the range a buyer is working in when the vendor publishes one efficiency and the application runs at another, and it is why the typical table matters more than the headline.
The same arithmetic sets the cold plate specification. A case at 85 degrees with a heat spreader at 60 degrees means 25 degrees across the interface, which at 133 W is 0.19 degrees per watt of interface and spreader. That is achievable with a clamped flanged package and a copper spreader, and not achievable with a thin aluminium plate and a fan.
What the typical table says that the headline does not
The typical table covers 410 to 600 MHz, not the whole 800 MHz band edge. Across that window the output moves from 53.0 to 54.0 dBm while the drive moves from 34.9 to 36.8 dBm, so the gain is not constant and the part is not being driven at a constant level in the vendor's own test. The gain at 560 MHz is 18.8 dB and at 410 MHz it is 16.8 dB, a 2 dB spread, and a 2 dB spread in gain across 150 MHz is normal for an unmatched device with a single section network.
The drain current moves from 6.9 A at 600 MHz to 9.3 A at 520 MHz at nearly the same output, which is the efficiency moving from 60.2 per cent down to 56.3 per cent. That is the number that decides the supply rating: 9.3 A at 48 V is 446 W of DC input for 245 W at the 54 dBm point, and the supply has to carry the peak of that range rather than the average.
The input return loss is minus 7 dB typical, which is a 2 to 1 input match. That is not a good match and it is not a fault: at this power the input network is part of the fixture, and the drive source sees whatever the fixture presents. A driver stage with a fixed output match will deliver a different power at 410 MHz than at 600 MHz because of it, and that variation should be in the test plan rather than discovered at the customer site.
Reading the document number against the catalogue row
The page for the catalogue part HXC50101 links a document titled HX510200V. The document describes a 200 W, 50 V, HF to 800 MHz unmatched LDMOS FET and its numbers match the row, so the document is almost certainly the right one for the part and the two names are different internal names for the same die. That is a reasonable explanation and not a verified one.
For a purchase specification the difference matters. A document control department will not accept a data sheet whose title does not match the part number on the purchase order without a written statement from the vendor that the two refer to the same device. Ask for that statement, or ask the vendor to reissue the document under the catalogue number, before the document goes into a controlled package.
The same document carries no orderable addendum and no packing column, so the order code, the reel or tube quantity and the moisture level still have to come from a quotation rather than from a document. That is the remaining gap even on the best documented row on this shelf.
Fixture notes from the document
The fixture in the document is a Class AB amplifier on 0.762 mm laminate with a dielectric constant of 3.50, Rogers 4350B, one ounce copper, with ATC600F and ATC800B series capacitors and two 10 nH air core inductors. That is a buildable bill of materials rather than a block diagram, and it is the fastest route to a first article that behaves like the typical table.
Two details are worth copying. The capacitors are 100 pF, 15 pF, 6.8 pF, 20 pF and 24 pF, values that are small enough to be dominated by their own parasitics at 600 MHz, so the series should be the one named rather than an equivalent. And the inductors are air core and hand wound, which means the fixture has a tolerance that the production build will not have, and the fixture should be measured rather than assumed to be representative of a printed inductor.
The incoming inspection plan page covers the electrical checks. For this part the plan can be tighter than on the undocumented rows, because the document gives a reference for every measurement: 17 dB gain and 60 per cent efficiency at 600 MHz into 200 W is a first article acceptance criterion that does not have to be invented.
Questions buyers ask about the HXC50101
Is the document for this part? The page links a document titled HX510200V for the catalogue part HXC50101. The numbers match the row; the names do not. Ask the vendor for a statement that the two are the same device before the document goes into a controlled package.
What is the junction temperature at full power? 162.3 degrees at 60 per cent efficiency with an 85 degree case, using the published 0.58 degrees per watt. At 55 per cent it is 179.9 degrees. Both are inside the 225 degree maximum.
How much drive does it need? About 4 W, 36 dBm, for 200 W at 17 dB. The typical table uses 34.9 to 36.8 dBm across the band.
Does it cover 800 MHz at 200 W? The row and the document both state HF to 800 MHz, but the typical table stops at 600 MHz. The top of the band is stated rather than measured in the document, so a build at 750 MHz needs its own first article.
What package is it? Flanged ceramic, two leads, PKG-G2E, with a fixture drawing in the document. That is a clamped or screwed flange rather than an earless one, which is a different build from the 650 W row.
Is there an orderable addendum? No. The document has no order code table, no packing column and no moisture level, so those come from the quotation.
For price and lead time, or for the HX510200V to HXC50101 naming statement, send the quantity and the sub band to the RF component sourcing desk. Where the part is a replacement in an existing amplifier, the cross reference page starts from the incumbent so the first article is compared at equal drive rather than at equal output.