Contact Us

HXC40041

Brand: Hisiwell
Hisiwell HXC40041 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40041 — Discrete & Power Semiconductors | Superb Automation

HXC40041

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40041 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40041: twelve and a half watts at seven decibels of gain on 9 to 10 GHz

The HXC40041 is the highest compression point member of the Hisiwell gallium arsenide internally matched group on 9 to 10 GHz. It uses in-plane matching synthesis and thin film hybrid integration, presents 50 ohm at both ports, and runs on a 10 V rail in continuous wave with plus or minus 0.8 dB flatness. The index row reads output at 1 dB compression at least 41 dBm, gain at least 7 dB, drain efficiency at least 30 per cent, saturation column empty.

41 dBm is 12.59 W. At seven decibels of gain the drive is 34 dBm, which is 2.51 W, and that is the single figure that decides whether the driver can stay on the same board. At 30 per cent the DC input is 41.97 W, the drain current 4.20 A and the heat 29.38 W, which puts this part in the same thermal class as the 41 dBm member of the lower window.

The window is 1.0 GHz from 9 to 10 GHz, 10.53 per cent fractional at a 9.5 GHz centre. It is the narrowest window in this gallium arsenide range, and the gain of seven decibels is a full decibel below the 41 dBm member on 8.5 to 9.6 GHz, so a line up moved from one window to the other needs its driver rechecked rather than reused.

The parameter rows Hisiwell publishes for HXC40041

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range9 to 10 GHz
Bandwidth, calculated1000 MHz, 10.53 per cent fractional at a 9.5 GHz centre
Output at 1 dB compression as publishedat least 41 dBm
Output at 1 dB compression in watts, calculated12.59 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 7 dB
Drain efficiency as publishedat least 30 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated34 dBm, 2.51 W
DC input at compression, calculated41.97 W
Drain current at compression, calculated4.20 A at 10 V
Dissipation at compression, calculated29.38 W
Dissipation if efficiency reaches 40 per cent, calculated18.88 W
Output per 100 MHz of the band, calculated1.26 W
Load voltage at compression into 50 ohm, calculated25.09 V RMS, 35.48 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour one step below at 39 dBmHXC40040, 30 per cent, 7 dB gain, 2.65 A
Saturation only member of the same windowHXC40042, 44 dBm, 6 dB gain, 8.37 A at the assumed efficiency

Two and a half watts of drive and twenty nine watts of heat

Both figures have to be solved in the same chassis. The dissipation of 29.38 W belongs to the final, and the 2.51 W of drive belongs to the stage before it, which will itself dissipate several watts. A line up on this window is therefore a three stage project: a small signal stage, a driver at the two to three watt level, and this part.

The rail is 10 V at 4.20 A. A buck converter with a five amp switch is the normal answer, and the inductor and the decoupling have to be laid out so the switching residue does not appear on the gate bias line. A linear regulator from 28 V would burn 75.6 W, which is more than twice the amplifier heat.

Where the driver cannot reach 2.51 W, the next option down the same window is the 39 dBm member, which needs 1.58 W and gives up 4.65 W of output. Moving down the ladder to keep the driver is usually cheaper than adding a stage, because a new stage brings its own bias, its own heat and its own qualification.

The thermal path is the same argument as on the lower window: a copper spreader, a thin interface and a fin stack. Because the vendor publishes no junction to case resistance, the case temperature on the first article is the only measurement that closes the loop, and it has to be taken at rated output with the final enclosure in place rather than on an open bench.

Where twelve and a half watts on 9 to 10 GHz is used

This is a transmitter for a link or a radar that needs the extra four and a half watts over the 39 dBm member and has the room for a real heatsink. The window covers the maritime navigation channels at 9.3 to 9.5 GHz and the weather radar allocation near 9.375 GHz, and it carries the short haul link channels planned into the low end of X band.

For a radar the part is specified for continuous wave, so any pulsed use has to be qualified against duty cycle and thermal mass. For a link the 12.59 W at the antenna port buys roughly four decibels over 3.98 W, which is a doubling of range on a free space path or a halving of antenna area.

A note on the load: 12.59 W into 50 ohm is 35.48 V peak, so the output connector, the cable and the isolator have to be rated above that with margin for the standing wave a mismatched antenna produces.

For a plan that spans wider than a gigahertz, this part cannot move; the 8.5 to 11 GHz high gain member covers 2.5 GHz at 2.51 W, and a plan that needs both the power and the span needs two parts and a switch.

The ladder at 9 to 10 GHz around HXC40041

The window is 3.98, 7.94 and 12.59 W at the compression point, each three decibels apart, and then 25.12 W at saturation with a six decibel gain. This part is the top of the linear ladder and the last member that a driver on the same board can reach without a second amplifier stage of its own.

Against the 39 dBm member it buys 4.65 W for 10.85 W of heat and 0.93 W of drive. Against the saturation only member it gives up half the power but keeps a stated compression point, a stated efficiency and a decibel more gain, which for a linear link is the difference between a budget that can be closed and one that cannot.

The RF power transistor cross reference puts the four members of this window next to the four on the lower window, and the one stop RF supply page covers how the three stages are bought together.

Questions buyers ask before ordering HXC40041

Is 41 dBm a minimum across the band? Yes, the index prints it as a minimum with plus or minus 0.8 dB flatness over 9 to 10 GHz, so the guarantee holds at both edges.

What is the saturated output? Not published. The compression point is the only output figure the vendor gives for this part.

How sensitive is it to the driver? The drive is 2.51 W at 34 dBm for the rated compression point. A driver that is a decibel short moves the operating point below compression, which costs output and does not damage the part but does change the level plan.

How do we start? Send the band edges, the output at the antenna, the duty, the ambient and the rail. We will confirm the member of the window, quote from the current factory schedule, and ship a sample with the factory test data at the band edges and centre.