Contact Us

HXC40040

Brand: Hisiwell
Hisiwell HXC40040 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40040 — Discrete & Power Semiconductors | Superb Automation

HXC40040

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40040 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40040: thirty nine decibels with seven decibels of gain on 9 to 10 GHz

The HXC40040 is the second member of the Hisiwell gallium arsenide internally matched group on 9 to 10 GHz. It is built on in-plane matching synthesis with thin film hybrid integration, presents 50 ohm at both ports, and runs on a 10 V drain rail in continuous wave with plus or minus 0.8 dB flatness. The published row is output at 1 dB compression at least 39 dBm, gain at least 7 dB, drain efficiency at least 30 per cent, with the saturation column empty.

39 dBm is 7.94 W. The gain is the figure to look at first on this window: at seven decibels the drive for the compression point is 32 dBm, which is 1.58 W, and that is 0.32 W more than the same output on the 8.5 to 9.6 GHz window costs, because the part there gives eight decibels. At 30 per cent the DC input is 26.47 W, the drain current 2.65 A and the heat 18.53 W.

The window is 1.0 GHz from 9 to 10 GHz, 10.53 per cent fractional at a 9.5 GHz centre. Inside that window the flatness is plus or minus 0.8 dB, which is the number a level plan carries across the whole band rather than per channel.

The parameter rows Hisiwell publishes for HXC40040

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range9 to 10 GHz
Bandwidth, calculated1000 MHz, 10.53 per cent fractional at a 9.5 GHz centre
Output at 1 dB compression as publishedat least 39 dBm
Output at 1 dB compression in watts, calculated7.94 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 7 dB
Drain efficiency as publishedat least 30 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated32 dBm, 1.58 W
DC input at compression, calculated26.47 W
Drain current at compression, calculated2.65 A at 10 V
Dissipation at compression, calculated18.53 W
Dissipation if efficiency reaches 40 per cent, calculated11.91 W
Output per 100 MHz of the band, calculated0.79 W
Load voltage at compression into 50 ohm, calculated19.93 V RMS, 28.18 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour one step below at 36 dBmHXC40039, 35 per cent, 8 dB gain, 1.14 A
Neighbour one step above at 41 dBmHXC40041, 30 per cent, 7 dB gain, 4.20 A

The decibel of gain this window gives up

On the 8.5 to 9.6 GHz window the same 7.94 W comes with eight decibels of gain, so the drive is 1.26 W. Here it comes with seven, so the drive is 1.58 W. Thirty two hundredths of a watt does not sound like much, and in a receiver it would not matter, but in a transmitter it changes the driver from a packaged part that is available in quantity to one that may need its own heatsink and its own qualification.

That is the honest reason a buyer sometimes stays on the lower window even when the channel plan allows the higher one. The price of the higher band is a decibel, and a decibel of gain costs more than a decibel of output in most line ups because it has to be bought at low power where the parts are small and the quantities are large.

The arithmetic of the two windows is easy to carry. A driver that gives 31 dBm feeds the lower window at its compression point and this one one decibel below it, and a driver that gives 33 dBm covers both with margin. Programmes that plan one product family across the two windows usually specify the driver at 33 dBm and pay for it once, rather than hold two drivers in the catalogue.

The heat is the same 18.53 W as the equivalent member on the other window, so the thermal work does not change. What changes is the driver and its rail, and that is the line to check before the group is fixed.

Nine to ten gigahertz in a compact transmitter

The window covers the maritime radionavigation band at 9.3 to 9.5 GHz and the weather radar allocation near 9.375 GHz, and it carries short haul links and telemetry channels that were planned into the low end of X band. A 7.94 W transmitter on this window is a common shape for a coastal radar or a compact data link where the antenna is small and the path is bounded.

Because the part is internally matched to 50 ohm across a full gigahertz, the board around it is a fifty ohm line with a bias tee and a decoupling network, and there is no tuning step on the line. That is the practical value of the group: the same board can be populated with any of the four members on the window, and the level plan changes while the plumbing stays.

One practical detail: the bias tee and the decoupling network do not change between the four members of this window, so a board can be reworked from one member to another without a new artwork. That is worth knowing when a second source is needed late in a programme and the schedule will not carry a new board.

For a plan that reaches below 9 GHz this window is not the answer, and the 8.5 to 9.6 GHz group is. For a plan that spans 8.5 to 11 GHz in one device, the high gain part on the wider window covers it at 2.51 W and 40 per cent.

The ladder at 9 to 10 GHz around HXC40040

Four members, three decibel steps, falling gain. The 36 dBm member gives eight decibels and 35 per cent, this one gives seven decibels and 30 per cent, the 41 dBm member gives seven decibels and 30 per cent, and the saturation only member gives six decibels and 30 per cent. The pattern means each step up costs more drive per decibel of output than the step before.

Against the 36 dBm member this part buys 3.96 W for 11.14 W of heat and 0.95 W of drive. Against the 41 dBm member it gives up 4.65 W and saves 10.85 W of heat. The middle of a three step ladder is usually the volume part, because it is the point where the driver is still a packaged amplifier and the heatsink is still an extrusion.

The RF power transistor cross reference shows both X band windows side by side, and the RF component sourcing page lists what we need before quoting a line up that includes the driver.

Questions buyers ask before ordering HXC40040

Why is the gain lower than the 8.5 to 9.6 GHz member? The vendor publishes seven decibels on this window against eight there. The output is the same 39 dBm, so the drive is higher, and a line up carried over from the lower window has to check its driver against 1.58 W.

Is the 30 per cent efficiency typical or minimum? It is printed as a minimum at the compression point, the same condition as the output and the gain.

Can a single driver feed two of these? Yes, with a splitter and two bias networks, and the pair gives 10.94 W before combining loss at 37 W of heat. The driver then has to supply 1.58 W into each port plus the splitter loss.

How do we start? Send the band edges, the output at the antenna, the modulation and the ambient at the base plate. We will confirm the member of the window, quote from the current factory schedule, and ship a sample with the factory test data at the band edges and centre.