HXC40018
Product Specifications
HXC40018
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40018 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40018: thirty one watts on the narrow 5.0 to 5.3 GHz window
The HXC40018 is a gallium arsenide internally matched power transistor covering 5.0 to 5.3 GHz, built by Hisiwell with in-plane matching synthesis and thin film hybrid integration and specified at 50 ohm on both ports. The index row reads 5.0 to 5.3 GHz, saturation output not printed, output at 1 dB compression at least 45 dBm, gain at least 10 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
This is the only member of the family on this particular window, and it is the highest power the family reaches on 10 V. 45 dBm is 31.62 W, which puts the same output as the HXC40014 into a band a third as wide. The window is 300 MHz, 5.83 per cent fractional at a 5.15 GHz centre, and the narrow match is what makes that output possible on this rail with 35 per cent efficiency.
The band itself is crowded. It starts where the unlicensed 5 GHz allocations begin in some regions and covers the 5.15 to 5.35 GHz range used by wireless access systems, radar and several fixed links. A part that covers it without a band select network is a different product from one that covers 4.4 to 5.0, even though the two look alike on a data sheet.
The parameter rows Hisiwell publishes for HXC40018
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 5.0 to 5.3 GHz |
| Bandwidth, calculated | 300 MHz, 5.83 per cent fractional at a 5.15 GHz centre |
| Output at 1 dB compression as published | at least 45 dBm |
| Output at 1 dB compression in watts, calculated | 31.62 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 10 dB |
| Drain efficiency as published | at least 35 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 35 dBm, 3.16 W |
| DC input at compression, calculated | 90.35 W |
| Drain current at compression, calculated | 9.04 A at 10 V |
| Dissipation at compression, calculated | 58.73 W |
| Dissipation if efficiency reaches 50 per cent, calculated | 31.62 W |
| Output per 100 MHz of the band, calculated | 10.54 W |
| Load voltage at compression into 50 ohm, calculated | 39.76 V RMS, 56.23 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour on the lower window at 45 dBm | HXC40014, 4.4 to 5.0 GHz, 35 per cent |
| Neighbour on the upper window at 45 dBm | HXC40022, 5.3 to 5.9 GHz, 35 per cent |
A narrow window is a trade, not a limitation
The 300 MHz match sits in the middle of a family whose other members cover 600 to 900 MHz. On paper that looks like less capability. In practice it is the trade that buys the power: a narrower match means less loss in the matching network and a better impedance transformation across the die, which is why 31.62 W is available here on 10 V with the same 35 per cent efficiency as the wider parts.
The consequence is that this part only suits a product whose channel plan is fixed and inside 5.0 to 5.3 GHz. A customer who might later move to 5.8 GHz should buy the 5.3 to 5.9 member or the wider 5.8 to 6.7 member, because re-tuning an internally matched transistor is not a board change, it is a different part.
The 300 MHz also means the plus or minus 0.8 dB flatness covers a smaller absolute band than it does on the 900 MHz parts, which is a benefit for a fixed level plan: the equalisation a transmitter needs across 300 MHz is less than what it needs across 900 MHz, and the temperature drift of the match over a narrow band is correspondingly smaller.
What sits inside 5.0 to 5.3 GHz
The window overlaps the lower part of the unlicensed 5 GHz spectrum in several regions, the 5.15 to 5.35 GHz wireless access band, some aeronautical and weather radar allocations, and a set of fixed links that were licensed before the unlicensed services arrived. It is also adjacent to the 4.9 GHz public safety band, which sits immediately below.
For a wireless access product the modulation is wideband and the peak to average ratio is high, so the practical operating point is well below compression and the published efficiency is not the working figure. Six decibels of back off takes the output to about 8 W and the efficiency into the twenties. That is still a useful part, but it is specified for the wrong application if the buyer reads 31.62 W and expects it under an OFDM envelope.
For radar and for fixed links with constant envelope modulation the part can run near compression and the published row applies as written. The 10.54 W per 100 MHz of band is high for a solid state device on 10 V, and it is the reason this part appears in transmitters where a single module has to cover a 300 MHz allocation without combining.
Thermally, 58.73 W at compression has to leave through the flange. A copper carrier with a thin interface material and a cold plate is the usual arrangement, and the transistor mounting torque matters as much as the material choice. Our one stop RF supply page describes how we handle the carrier and the interface together with the device when a customer wants the assembly rather than the part.
The same output on three windows
Three members of the family reach 45 dBm on 10 V: this part on 5.0 to 5.3 GHz, the HXC40014 on 4.4 to 5.0 GHz and the HXC40022 on 5.3 to 5.9 GHz. All three quote 10 dB of gain and 35 per cent efficiency, so the only difference that matters is the window. A product that has to work across 4.4 to 5.9 GHz cannot do it with one of them, and the usual answer is two boards with the same outline and a different transistor fitted.
For a buyer replacing a competitor part, the deciding question is usually the guard band at the edge of the allocation rather than the nominal band. A 45 dBm part whose match is centred at 5.15 GHz behaves differently at 5.0 and at 5.3 than a part centred at 5.6 GHz used at the edge of its range, and the flatness row alone does not tell you which. That is why we measure at both edges on the sample.
Our RF power transistor cross reference lists the three windows against the parts that occupy them, which is the fastest way to see whether a competitor number has a direct replacement.
Questions buyers ask before ordering HXC40018
Can it be used at 4.9 GHz? No. The vendor band starts at 5.0 GHz, and the match falls away below it. A 4.9 GHz application belongs on the 4.4 to 5.0 GHz member.
Is the 45 dBm figure at saturation? No. It is 1 dB compression, and the saturation column carries a slash. The saturation figure would be higher and has to be measured.
Is there an orderable addendum? Not published. The vendor gives the electrical row, the 50 ohm ports and the matching technique. Reel size, marking and moisture level come from the factory quotation.
How do we start? Send the channel plan with its edges, the modulation, the ambient at the flange and the drive available. We will confirm the fit, quote from the current schedule and ship a sample measured at 5.0, 5.15 and 5.3 GHz.