CDR14BP302AJSM KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
CDR14BP302AJSM — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The CDR14BP302AJSM is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | CDR14BP302AJSM |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | CDR14BP302AJSM |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source CDR14BP302AJSM from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order CDR14BP302AJSM or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
CDR14BP302AJSM: 3000 pF at 50 V in the CDR14 outline
Field by field, CDR14BP302AJSM reads style CDR14 in the 0.110 inch square outline, dielectric BP, 302 is the capacitance code, two significant digits and a count of zeros, which reads 3000 pF, voltage field A at 50 V, tolerance J, termination S and failure rate level M. The printed window is plus or minus 5 percent, so the 3000 pF part that arrives is accepted between 2850 and 3150 pF and no wider.
| Style and outline | CDR14, military style in the 0.110 inch square outline |
| Dielectric | BP, zero plus or minus 30 ppm per degree C |
| Capacitance | 3000 pF, code 302 |
| Tolerance | J, plus or minus 5 percent, a window of 2850 to 3150 pF |
| Rated voltage | 50 VDC, voltage letter A |
| Termination | S, solder coated final with a minimum of 4 percent lead |
| Failure rate level | M, 1.0 percent |
| Qualification | MIL-PRF-55681, slash sheet 4 covers styles CDR11 to CDR14 |
| Style capacitance range | 0.1 pF to 5100 pF, 200 and 500 V on the small values |
| Body length | 2.79 plus 0.889 minus 0.508 mm |
| Body width | 2.79 plus or minus 0.508 mm |
| Body thickness | 0.762 to 2.59 mm |
| Termination band | 0.127 to 0.635 mm |
| Operating range | minus 55 to plus 125 degrees C with and without rated voltage |
| Temperature drift over the range | about 16.2 pF at 30 ppm per degree C |
| Reactance at 150 MHz | 0.35 ohm nominal |
| Reactance at 1 GHz | 0.05 ohm nominal |
| Reactance at 2.45 GHz | 0.02 ohm nominal |
| Stored energy at rated voltage | 0.0 nanojoule at 50 V |
| Packing | waffle pack 80 pcs, or tape and reel 2000 pcs on a 7 inch reel |
On this family the outline comes first and the value second. CDR14 is the 0.110 inch square body, 2.79 plus 0.889 minus 0.508 mm by 2.79 plus or minus 0.508 mm with 0.762 to 2.59 mm of thickness, and the 3000 pF value is one line inside that. A board that carried a CDR14 part keeps the same pad if the outline letter stays and the value moves, which is the swap most programs actually make.
The tolerance letter deserves the second look. J on 3000 pF pins the part to plus or minus 5 percent, a band of 2850 to 3150 pF, and a letter that reads close on a quotation can widen that band five times over. At 50 V the value and the letter together decide whether the part lands in a tuned stage or is rejected at first article.
CDR14 body, termination and packing
For the 3000 pF part the mechanical facts are simple: 0.110 inch square outline, 2.79 plus 0.889 minus 0.508 mm long by 2.79 plus or minus 0.508 mm wide, 0.762 to 2.59 mm thick, termination band 0.127 to 0.635 mm. Nothing in that changes when the capacitance or the voltage field changes, which is what makes a like for like replacement possible on an existing board.
The termination field matters as much as the case. S means solder coated final with a minimum of 4 percent lead, so the solderable finish is declared inside the part number, and a line that is running lead free has to choose a different letter rather than assume a different plating. On a 3000 pF order at 50 V that letter travels with the part into incoming inspection.
Dielectric and rating at 50 V
Read the coefficient as the promise and the tolerance as the contract. The dielectric BP is held to zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, which on 3000 pF is about 16.2 pF, while the letter J fixes plus or minus 5 percent. The larger of the two is what a tuned stage actually sees.
The rating is 50 VDC against voltage field A. The sheet prints no withstanding test multiple for this family, so no percentage claim is made here, and it prints typical Q and ESR curves rather than a single ohmic limit, so the loss figure for a 3000 pF part at 50 V comes from that curve set and from the supplier data.
What 3000 pF does from 30 MHz to 2.45 GHz
On the 302 code at 50 V the reactance column reads 1.77 ohm at 30 MHz, 0.35 ohm at 150 MHz, 0.11 ohm at 500 MHz, 0.05 ohm at 1 GHz and 0.02 ohm at 2.45 GHz, and the value is already below 50 ohm at the bottom of the band, because the crossing sits at about 1.1 MHz. A body this small is bought for the shift it adds to a node, not for its printed number.
With a 50 ohm load in series the half power point of a 3000 pF part sits at 1.1 MHz, the frequency where its reactance equals the load. Below that point the capacitor sets the loss and above it the same part is close to a short, which on a 50 V stage is the number to quote when one position has to pass a band and block a DC feed.
Loss is the one place where this sheet deliberately stops short: typical Q against frequency, typical ESR against frequency, typical Q and ESR against capacitance, and no single ceiling. A 3000 pF body at 50 V is therefore specified on the published curves, and the arithmetic here is limited to reactance and stored energy, which are printed facts.
The energy question has a short answer for this part: 0.0 nanojoule at 50 V, with 150 nanocoulomb of charge. Against the plus or minus 5 percent tolerance window the energy figure moves with the square of the applied voltage, so a 50 V part used at half the rating carries a quarter of that energy.
Sourcing the 3000 pF value and the second source
For CDR14BP302AJSM at 50 V the order needs the capacitance code, the tolerance letter, the voltage letter, the termination and the failure rate level, plus a packing quantity. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service carries the sourcing side, and a replacement is checked on those five fields before date code and lot records are compared. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programmes, so the discussion starts from the bill of materials and the schedule.
A 3000 pF part at 50 V is a line item before it is a component, so the order carries the package quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on the five fields the order code exposes, capacitance, tolerance, voltage, dielectric and outline, and only then on the certificate.
On a 3000 pF part at 50 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The fields to compare are capacitance, tolerance, voltage, dielectric and outline, and the failure rate letter then decides how much screening the lot has already seen.