CDR14BG2R7EBSM KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
CDR14BG2R7EBSM — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The CDR14BG2R7EBSM is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | CDR14BG2R7EBSM |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | CDR14BG2R7EBSM |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source CDR14BG2R7EBSM from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order CDR14BG2R7EBSM or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
CDR14BG2R7EBSM: 2.7 pF at 500 V in the CDR14 outline
Six fields sit inside CDR14BG2R7EBSM and none of them is a preference: style CDR14, dielectric BG, 2R7 holds the decimal place in the R position, so the value is 2.7 pF, voltage letter E for 500 VDC, tolerance B for plus or minus 0.10 pF, termination S and failure rate M at 1.0 percent. Change one letter and the part on the drawing is a different part, which is why the order is checked against the number and not against the family name. A wrong style letter fits nothing on the board, and a wrong dielectric letter tunes to another place.
| Style and outline | CDR14, military style in the 0.110 inch square outline |
| Dielectric | BG, plus 90 plus or minus 20 ppm per degree C |
| Capacitance | 2.7 pF, code 2R7 |
| Tolerance | B, plus or minus 0.10 pF, a window of 2.600 to 2.800 pF |
| Rated voltage | 500 VDC, voltage letter E |
| Termination | S, solder coated final with a minimum of 4 percent lead |
| Failure rate level | M, 1.0 percent |
| Qualification | MIL-PRF-55681, slash sheet 4 covers styles CDR11 to CDR14 |
| Style capacitance range | 0.1 pF to 5100 pF, 200 and 500 V on the small values |
| Body length | 2.79 plus 0.889 minus 0.508 mm |
| Body width | 2.79 plus or minus 0.508 mm |
| Body thickness | 0.762 to 2.59 mm |
| Termination band | 0.127 to 0.635 mm |
| Operating range | minus 55 to plus 125 degrees C with and without rated voltage |
| Temperature drift over the range | about 0.0437 pF at 90 ppm per degree C |
| Reactance at 150 MHz | 393.0 ohm nominal |
| Reactance at 1 GHz | 58.9 ohm nominal |
| Reactance at 2.45 GHz | 24.1 ohm nominal |
| Stored energy at rated voltage | 0.0 nanojoule at 500 V |
| Packing | waffle pack 80 pcs, or tape and reel 2000 pcs on a 7 inch reel |
CDR14 carries the 0.110 inch square outline: 2.79 plus 0.889 minus 0.508 mm by 2.79 plus or minus 0.508 mm, with a body between 0.762 to 2.59 mm and a termination band running from 0.127 to 0.635 mm. The dielectric BG is coefficient limited rather than value limited, so the 2.7 pF part at 500 V sits inside a family that holds its coefficient across the whole range.
Because CDR14 is a chip ceramic, the tolerance letter is the only field that moves the electrical window: on 2.7 pF it gives plus or minus 0.10 pF, or 2.600 to 2.800 pF. The voltage field E fixes the rating instead, and the two are read side by side on the receiving dock.
CDR14 body, termination and packing
Mechanically the 2.7 value at 500 V is a 0.110 inch square body, 2.79 plus 0.889 minus 0.508 mm by 2.79 plus or minus 0.508 mm, with the band between 0.127 to 0.635 mm. A reel of these is picked and placed like any chip, and the outline letter is what tells the placement program which nozzle and which pocket to expect.
On the finish, S reads solder coated final with a minimum of 4 percent lead. Nothing in the electrical table changes with it, but the assembly and the inspection plan do, and on a programme with a fixed profile that letter is the first thing checked after the value.
Dielectric and rating at 500 V
The electrical identity of CDR14BG2R7EBSM is one coefficient over one range: plus 90 plus or minus 20 ppm per degree C from minus 55 to plus 125 degrees C, printed with and without the rated voltage applied. On 2.7 pF that comes to about 0.0437 pF of drift across the range, small against the plus or minus 0.10 pF window the tolerance letter allows.
On CDR14BG2R7EBSM the voltage field E is the whole rating statement at 500 V, and the failure rate letter M at 1.0 percent is the screening statement. The sheet gives typical loss curves for the family instead of a printed ESR ceiling, so a 2.7 pF part in a loss sensitive position is judged on that curve rather than on a single number.
What 2.7 pF does from 30 MHz to 2.45 GHz
Read as reactance the 2.7 pF part at 500 V is 1965 ohm at 30 MHz, 393.0 ohm at 150 MHz, 117.9 ohm at 500 MHz, 58.9 ohm at 1 GHz and 24.1 ohm at 2.45 GHz, so against 50 ohm it does not reach 50 ohm anywhere inside the band, because the crossing sits at about 1.18 GHz. Below self resonance the body behaves as a capacitor and the figure falls with frequency, above it the same body turns inductive. The figures above are computed at the printed value, so they move with the tolerance letter in the same proportion.
One more figure settles the application: into 50 ohm the 2.7 pF part reaches its half power point at 1.18 GHz, where reactance equals load. A 500 V stage that has to work below that point needs a larger value, and one that works above it can use this body as a coupling element, with 393.0 ohm at 150 MHz left in the line.
The sheet prints typical Q and ESR curves by frequency and by capacitance, and it prints no single ohmic limit and no amperage for this family. On a 2.7 pF part at 500 V that means the loss budget is read off the curve for the value and the mounting, and a stage that pushes current through the part is quoted from that curve rather than from a number.
At 500 V the 2.7 pF body holds 0.0 nanojoule and 1.35 nanocoulomb. Both are small, and both are the reason this value is used in signal and matching positions rather than in energy storage, where the same outline would be the wrong purchase.
Sourcing the 2.7 pF value and the second source
A 2.7 pF part at 500 V arrives either in a 80 piece waffle pack or on tape and reel, 2000 pieces on a 7 inch reel and 10,000 on a 13 inch reel. RF Component Sourcing, BOM Shortage Recovery, Incoming Inspection Plan holds the sourcing path, and a second source is matched on capacitance, tolerance, voltage, dielectric and outline before a sample is released, because a different outline changes the pad and a different dielectric changes the coefficient.
For a 2.7 pF value rated at 500 V the order needs five fields and one packing quantity, and nothing else on this page moves the price of a package. Incoming inspection then reads the marking, measures against the plus or minus 0.10 pF window from 2.600 to 2.800 pF, and confirms the voltage letter on the label.
Package and lot records travel with the 2.7 pF part at 500 V, because a body this small is hard to confirm on a meter that was not zeroed. The order records the packing code, the date code and the quantity, and the incoming check is written against those fields so a later build traces back to the same lot.