Contact Us

800E910JT7200X KYOCERA AVX RF Capacitor

Brand: ATC
The 800E910JT7200X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800E910JT7200X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800E910JT7200X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800E910JT7200X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800E910JT7200X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800E910JT7200X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800E910JT7200X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800E910JT7200X: 91.0 pF at 7200 V in the case E outline

Field by field, 800E910JT7200X reads series 800E, case E, 910 is the capacitance code, two significant digits and a count of zeros, which reads 91.0 pF, tolerance J giving plus or minus 5 percent, termination T, the tin plated nickel barrier, a voltage field of 7200 and laser marking X, with no packing letter at the end. On the 91.0 pF value at 7200 V that window is 4.55 pF either side of the printed figure, which is the number a buyer checks before accepting a replacement.

Series and case800E in case E, a 0.380 inch square outline, 9.65 mm by 9.65 mm overall
Capacitance91.0 pF, code 910
ToleranceJ, plus or minus 5 percent, a window of 86.5 to 95.5 pF
Working voltage7200 VDC, 5090 V RMS on a sine wave
Dielectric withstanding8640 V for five seconds, 120 percent of the working voltage
Life test7200 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF
Insulation resistance at 25 C10^5 Mohm minimum, tested at 500 VDC maximum
Insulation resistance at 125 C10^4 Mohm minimum, tested at 500 VDC maximum
Outline0.380 plus 0.015 minus 0.010 inch, 9.65 plus 0.38 minus 0.25 mm on each side
Termination overlap0.040 inch, 1.02 mm maximum, on every value in the case
Terminal strength10 lbs minimum and 25 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Aging and piezoelectric effectsnone stated for both on this sheet
Stored energy2.36 millijoule at 7200 V, from one half C V squared
Stored charge655 nanocoulomb at 7200 V
Reactance at 150 MHz11.7 ohm nominal
Packingtape and reel 250 pieces, tray 24 or 96, tray 16 or 32, box of 20

The series runs one case and one dielectric from 3.3 pF to 5100 pF, and the field that moves down that table is the working voltage. On the 91.0 pF value it lands at 7200 V, and the tolerance letter J fixes the window at plus or minus 5 percent on top of it, so a 91.0 pF part at another voltage is a different line on the same sheet rather than another family.

The tolerance letter deserves a second look before the order goes out: J is not a grade, and on the 91.0 pF value at 7200 V it pins the part to plus or minus 5 percent, a band of 86.5 to 95.5 pF. A letter that reads close on a quotation can widen that band by a factor of two, so 91.0 pF at 7200 V is matched against the drawing and not against the family name.

Case E body and the horizontal pad for 91.0 pF

For the 91.0 pF part at 7200 V the body is 9.65 mm square and the overlap is 1.02 mm, and the pull figure is 10 lbs minimum against 25 lbs typical for five seconds to method 211. Those two numbers, rather than the nominal size, decide how much force placement and depaneling may put on a 7200 V body.

The sheet prints one pad table for case E and only the horizontal mount: normal A .405, B .050, C .325 and D .425 inch, high density A .383, B .030, C .325 and D .385 inch, which in metric is 10.29, 1.27, 8.26 and 10.80 mm normal and 9.73, 0.76, 8.26 and 9.78 mm high density. Both rows cover every value, so the 91.0 pF part at 7200 V picks a row, not a land.

Electrical limits at 7200 VDC

For 800E910JT7200X at 7200 V the limits are a withstanding test at 8640 V for five seconds and a life test at 7200 V for 2000 hours at 125 degrees C, 100 percent of the rating. The rest does not move with the value: 30 ppm per degree C, greater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF, and insulation resistance of 10^5 Mohm at 25 degrees C falling to 10^4 Mohm at 125 degrees C, both measured at 500 VDC maximum.

Two of those figures are easy to misread. Insulation resistance is quoted at 500 VDC even on the 7200 V part, so a 91.0 pF body at 7200 V is never tested at its rating on a bench supply. Quality factor is quoted for the whole case at greater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF.

What 91.0 pF does from 30 MHz to 1 GHz

On the 91.0 pF code at 7200 V the reactance column reads 58.3 ohm at 30 MHz, 11.7 ohm at 150 MHz, 3.50 ohm at 500 MHz and 1.75 ohm at 1 GHz, and the value reaches 50 ohm at about 35.0 MHz, inside the band. A body this size is bought for the shift it adds to a node rather than for its printed number. The J window of 86.5 to 95.5 pF reads 11.1 ohm at the top and 12.3 ohm at the bottom against 11.7 ohm nominal at 150 MHz, a spread of 1.17 ohm, 10.0 percent of nominal on a 7200 V part.

Quality factor for the 91.0 pF value at 7200 V is greater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF. The sheet prints no ESR limit and no amperage for this case, only the loss figure by quality factor, so a 7200 V stage is quoted from Q and from the supplier data rather than from a printed ohmic number.

Over minus 55 to plus 125 degrees C the 30 ppm per degree C coefficient moves a 91.0 pF body at 7200 V by roughly 0.4914 pF, which at 150 MHz is 0.063 ohm against the 11.7 ohm it presents nominally. That drift is why the 91.0 pF value is quoted with its coefficient and its window together.

Sourcing the 91.0 pF value and the second source

For 800E910JT7200X at 7200 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else on this page moves the price of a package. RF Component Sourcing, Obsolete RF Part Replacement, Incoming Inspection Plan carries the sourcing side, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

A 91.0 pF part at 7200 V is a line item before it is a component, so the order carries the package quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage and case before a sample reaches the line.

On a 91.0 pF part at 7200 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The four fields to compare are capacitance, tolerance, voltage and case, and the packing code then decides how many boards one package covers.