800E820JT7200X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
800E820JT7200X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800E820JT7200X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800E820JT7200X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800E820JT7200X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800E820JT7200X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800E820JT7200X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800E820JT7200X: 82.0 pF at 7200 V in the case E outline
Six decisions sit inside 800E820JT7200X: series 800E, case E at 9.65 mm square, 820 is the capacitance code, two significant digits and a count of zeros, which reads 82.0 pF, tolerance J at plus or minus 5 percent, termination T for the tin plated nickel barrier, the voltage field 7200 for 7200 VDC, and X for laser marking. The sheet runs 3.3 pF to 5100 pF in this case, so on a 82.0 pF part at 7200 V the capacitance code and the voltage field are what separate it from the reel beside it in the store.
| Series and case | 800E in case E, a 0.380 inch square outline, 9.65 mm by 9.65 mm overall |
| Capacitance | 82.0 pF, code 820 |
| Tolerance | J, plus or minus 5 percent, a window of 77.9 to 86.1 pF |
| Working voltage | 7200 VDC, 5090 V RMS on a sine wave |
| Dielectric withstanding | 8640 V for five seconds, 120 percent of the working voltage |
| Life test | 7200 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF |
| Insulation resistance at 25 C | 10^5 Mohm minimum, tested at 500 VDC maximum |
| Insulation resistance at 125 C | 10^4 Mohm minimum, tested at 500 VDC maximum |
| Outline | 0.380 plus 0.015 minus 0.010 inch, 9.65 plus 0.38 minus 0.25 mm on each side |
| Termination overlap | 0.040 inch, 1.02 mm maximum, on every value in the case |
| Terminal strength | 10 lbs minimum and 25 lbs typical for five seconds, MIL-STD-202 method 211 |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Aging and piezoelectric effects | none stated for both on this sheet |
| Stored energy | 2.13 millijoule at 7200 V, from one half C V squared |
| Stored charge | 590 nanocoulomb at 7200 V |
| Reactance at 150 MHz | 12.9 ohm nominal |
| Packing | tape and reel 250 pieces, tray 24 or 96, tray 16 or 32, box of 20 |
Across 3.3 pF to 5100 pF the case stays 9.65 mm square and the NPO dielectric stays the same, while the working voltage steps from 7200 V down through 3600 V, 2500 V and 2000 V as the capacitance grows. The 82.0 pF value on this page sits at 7200 V with a J window, and those two fields are what the goods in check reads against the label.
Because 800E820JT7200X stops at the marking field, the packing code is quoted with the order and nothing else is left loose. For the 82.0 pF value at 7200 V the three fields read at goods in are the capacitance code 820, the tolerance letter J and the voltage field 7200, and all three are printed inside the part number.
Case E body and the horizontal pad for 82.0 pF
Mechanically the 82.0 pF value at 7200 V is a 0.380 inch square body with 0.040 inch, 1.02 mm, of overlap between termination and ceramic. Terminal strength is printed as 10 lbs minimum and 25 lbs typical for five seconds to MIL-STD-202 method 211, so a 7200 V part of this size takes a pull that a fixture has to stay under when the board is clamped for test.
Printed pads run from the roomy normal row at A .405, B .050, C .325 and D .425 inch to the tight high density row at A .383, B .030, C .325 and D .385 inch, with C fixed at .325 inch in both. On the 82.0 pF part at 7200 V the assembly drawing names one row, and the stencil aperture follows the row rather than the capacitance.
Electrical limits at 7200 VDC
On 800E820JT7200X the voltage story is a 7200 V rating, a withstanding test at 8640 V for five seconds, which is the same 120 percent for every value in the case, and a 2000 hour life test at 125 degrees C at 7200 V, 100 percent of the rating because the part sits above 1250 V. Around that the sheet fixes a 30 ppm per degree C coefficient and greater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF.
Receiving inspection on a 82.0 pF part at 7200 V usually starts with drift and retrace, plus or minus 0.02 percent or 0.02 pF, whichever is greater, because it bounds what a tuned stage sees after a thermal cycle. Aging and piezoelectric effects are both stated as none, and the sheet names no EIA-198, MIL-PRF-55681 or QPL listing for the series.
What 82.0 pF does from 30 MHz to 1 GHz
Read as reactance the 82.0 pF part at 7200 V is 64.7 ohm at 30 MHz, 12.9 ohm at 150 MHz, 3.88 ohm at 500 MHz and 1.94 ohm at 1 GHz, and against 50 ohm it reaches 50 ohm at about 38.8 MHz, inside the band. Below self resonance the body behaves as a capacitor and the figure falls with frequency, above it the same body turns inductive. The J window of 77.9 to 86.1 pF reads 12.3 ohm at the top and 13.6 ohm at the bottom against 12.9 ohm nominal at 150 MHz, a spread of 1.30 ohm, 10.0 percent of nominal on a 7200 V part.
At 7200 V the 82.0 pF value holds 12.9 ohm at 150 MHz and its loss budget is greater than 5,000 at 1 MHz, the figure the sheet prints for 3.3 to 1000 pF. Because the sheet prints no amperage for this case, the current a 82.0 pF body can carry at 7200 V is read from the supplier curve for the mounting, not from a number on the data sheet.
Temperature is the other half of the frequency picture. The coefficient is zero plus or minus 30 ppm per degree C, so a 82.0 pF part at 7200 V moves by about 0.4428 pF over the full minus 55 to plus 125 degrees C range, which at 150 MHz is 0.070 ohm on top of the accepted window.
Sourcing the 82.0 pF value and the second source
A 82.0 pF part at 7200 V ships on tape and reel at 250 pieces, on a tray of 24, 96, 16 or 32, or in a box of 20, and the packing code is a line on the order rather than a field inside the part number. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service holds the sourcing path, and a second source is matched on capacitance, tolerance, voltage and case before a sample is released, because another case changes the pad and a wider tolerance changes the window.
For a 82.0 pF value rated at 7200 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else changes the price of the package. Incoming inspection then reads the marking, measures against the J window and confirms the voltage field on the label.
Package and lot records travel with the 82.0 pF part at 7200 V, because a value this small at this voltage is hard to confirm on a meter that was not zeroed. The order records packing code, date code and quantity, and the incoming check is written against those fields so a later build traces back to the same lot.