Contact Us

800C821JTN1000X KYOCERA AVX RF Capacitor

Brand: ATC
The 800C821JTN1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800C821JTN1000X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800C821JTN1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800C821JTN1000X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800C821JTN1000X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800C821JTN1000X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800C821JTN1000X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800C821JTN1000X: 820 pF at 1000 V in the case C outline

The string 800C821JTN1000X carries six decisions: series 800C, case C at 6.35 mm square, 821 is the capacitance code, two significant digits followed by the count of zeros, which lands on 820 pF, tolerance letter J at plus or minus 5 percent, termination TN for non-magnetic tin over a barrier, the voltage field 1000 for 1000 VDC, then X for laser marking. The sheet prints 2.2 pF to 3000 pF for this case, so on a 820 pF part at 1000 V the capacitance code and the voltage field are what keep it apart from the reel beside it.

Series and case800C in case C, a 0.250 inch square outline, 6.35 mm by 6.35 mm overall
Capacitance820 pF, code 821
ToleranceJ, plus or minus 5 percent, a window of 779 to 861 pF
Working voltage1000 VDC, 707 V RMS on a sine wave
Dielectric withstanding1500 V for five seconds, 150 percent of the working voltage
Life test1200 V for 2000 hours at 125 degrees C, 120 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 2000 at 1 MHz
Series resistance0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits
Insulation resistance at 25 C10^5 Mohm minimum at the rated working voltage
Insulation resistance at 125 C10^4 Mohm minimum at the rated working voltage
Body thickness5.08 mm maximum, 0.200 inch, on every value in the case
Termination overlap1.02 mm, 0.040 inch, on every value in the case
Terminal strength10 lbs minimum and 20 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Aging and piezoelectric effectsnone stated for both on this sheet
Stored energy410 microjoule at 1000 V, from one half C V squared
Stored charge820 nanocoulomb at 1000 V
Reactance at 150 MHz1.29 ohm nominal

Across 2.2 pF to 3000 pF the case does not change, the NP0 dielectric does not change and the coefficient stays at zero plus or minus 30 ppm per degree C, but the working voltage does: the same case C body is offered from 3600 V down to 500 V depending on the capacitance. The 820 pF part sits at 1000 V with a J window, and those two fields are what the storekeeper reads on the tray label.

The packing choice sits outside 800C821JTN1000X because the number ends at the laser marking field. For the 820 pF part at 1000 V the three fields that matter at goods in are the capacitance code 821, the tolerance letter J and the voltage field 1000, and all three are printed in the part number itself rather than left to a drawing note.

Case C body and the horizontal pad for 820 pF

Mechanically the 820 pF value at 1000 V is a 6.35 mm square outline, 5.08 mm thick at the maximum, with 1.02 mm of overlap between termination and ceramic. Terminal strength is printed as 10 lbs minimum and 20 lbs typical for five seconds to MIL-STD-202 method 211, which is double the pull of the small case and the figure a fixture has to stay under when the board is clamped for test.

Printed pads run from the roomy normal row at A .280, B .050, C .200 and D .300 inch to the tight high density row at A .260, B .030, C .200 and D .260 inch, with the C dimension fixed at .200 inch in both. On a 820 pF part at 1000 V the assembly drawing names one of those two rows, and the stencil aperture follows the row rather than the capacitance.

Electrical limits at 1000 VDC

On 800C821JTN1000X the voltage story is a 1000 V rating and a withstanding test at 1500 V for five seconds, 150 percent rather than the 250 percent that applies at 500 V and below. Life test runs 2000 hours at 125 degrees C at 1200 V, which is 120 percent of the rating. Around that the sheet fixes a 30 ppm per degree C coefficient, quality factor above 2000 at 1 MHz, 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits and drift of plus or minus 0.02 percent or 0.02 pF.

Receiving inspection on a 820 pF part at 1000 V usually starts with the drift figure, plus or minus 0.02 percent or 0.02 pF, whichever is greater, because it bounds the retrace a tuned stage sees after a thermal cycle. Retrace itself is stated as none, aging and piezoelectric effects as none, and the environmental block is MIL-STD-202 method 107 condition A, method 106 and method 103 condition A at 85 degrees C and 85 percent for 240 hours.

What 820 pF does from 30 MHz to 1 GHz

Read as reactance the 820 pF part at 1000 V is 6.47 ohm at 30 MHz, 1.29 ohm at 150 MHz, 0.39 ohm at 500 MHz and 0.19 ohm at 1 GHz, and against 50 ohm it reaches 50 ohm at about 3.9 MHz, inside the band. Below self resonance the part behaves as a capacitor and the figure falls with frequency, above it the same body turns inductive, so the resonance curve for case C decides where 820 pF stops being a capacitor at all. The J window of 779 to 861 pF reads 1.23 ohm at the top and 1.36 ohm at the bottom against 1.29 ohm nominal at 150 MHz, so the band spreads the reactance by 0.13 ohm, 10.0 percent of the nominal on a 1000 V part.

At 1000 V the 820 pF value holds 1.29 ohm at 150 MHz and its loss budget is quality factor above 2000 at 1 MHz and 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits. Current rating is read off the family curve at a 65 C mounting surface with 15 C per watt, so the same part carries less current on a thin board than on a heavy one, and the curve rather than a single amperage is the honest figure.

Temperature is the second half of the frequency picture. The coefficient is zero plus or minus 30 ppm per degree C, so a 820 pF part at 1000 V moves by about 4.4280 pF over the full minus 55 to plus 125 degrees C range, which at 150 MHz is 0.007 ohm on top of the tolerance already accepted.

Sourcing the 820 pF value and the second source

A 820 pF part at 1000 V ships on tape and reel, 500 or 250 pieces, or on a tray of 36, 180, 24 or 60, or in a box of 24, and the packing code is a line on the order rather than a field in the part number. That matters where one package has to cover a fixed run of boards. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service holds the sourcing path, and a second source is matched on capacitance, tolerance, voltage and case before a sample is released, because a different case changes the pad and a different tolerance changes the window.

For a 820 pF value rated at 1000 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else changes the price of the package. Incoming inspection then reads the marking, measures the value against the J window and confirms the voltage field on the label.

Package and lot records travel with the 820 pF part at 1000 V, because a value this size is hard to confirm on a bench meter that was not zeroed. The order records the packing code, the date code and the quantity, and the incoming check is written down against those fields so a later build can be traced back to the same lot.