Contact Us

800C820JTN2500X KYOCERA AVX RF Capacitor

Brand: ATC
The 800C820JTN2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800C820JTN2500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800C820JTN2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800C820JTN2500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800C820JTN2500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800C820JTN2500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800C820JTN2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800C820JTN2500X: 82.0 pF at 2500 V in the case C outline

Read 800C820JTN2500X from the left and the order is already fixed. 800C names the series, the C is case C at 0.250 inch square, 820 is the capacitance code, two significant digits followed by the count of zeros, which lands on 82.0 pF, J sets the window at plus or minus 5 percent, TN is the non-magnetic tin termination over a non-magnetic barrier, 2500 is the working voltage in volts DC, and X is the laser marking. The string stops at X, so the packing letter is a separate line on the order rather than part of the number.

Series and case800C in case C, a 0.250 inch square outline, 6.35 mm by 6.35 mm overall
Capacitance82.0 pF, code 820
ToleranceJ, plus or minus 5 percent, a window of 77.9 to 86.1 pF
Working voltage2500 VDC, 1768 V RMS on a sine wave
Dielectric withstanding3750 V for five seconds, 150 percent of the working voltage
Life test2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 2000 at 1 MHz
Series resistance0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits
Insulation resistance at 25 C10^5 Mohm minimum at the rated working voltage
Insulation resistance at 125 C10^4 Mohm minimum at the rated working voltage
Body thickness5.08 mm maximum, 0.200 inch, on every value in the case
Termination overlap1.02 mm, 0.040 inch, on every value in the case
Terminal strength10 lbs minimum and 20 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Aging and piezoelectric effectsnone stated for both on this sheet
Stored energy256 microjoule at 2500 V, from one half C V squared
Stored charge205 nanocoulomb at 2500 V
Reactance at 150 MHz12.9 ohm nominal

TDS-RFM-0023 prints one capacitance range for the series, 2.2 pF to 3000 pF, and one operating range for all of it, minus 55 to plus 125 degrees C with no derating of working voltage. What moves inside the range is the voltage a value is offered at: the small capacitances carry the full 3600 V, the middle of the table steps to 2500 V and the large values step down again. On this page the pair is 82.0 pF and 2500 V.

Nothing in 800C820JTN2500X is optional once the drawing exists: case letter, capacitance code, tolerance letter and voltage field all have to match, and only the packing letter at the end, the one this number leaves off, is a free choice. On the 82.0 pF value at 2500 V that leaves plus or minus 5 percent as the acceptance window and 2500 V as the rating the board has to survive.

Case C body and the horizontal pad for 82.0 pF

The body is 5.84 mm long on the 230 mil dimension with plus 0.64 and minus 0.25 mm, 6.35 mm wide plus or minus 0.38 mm and 5.08 mm thick at the maximum, with 1.02 mm of termination overlap on each end. That is a much larger block than the 0.110 inch case, so the 82.0 pF part at 2500 V changes what the placement nozzle and the reflow profile have to handle, not just what the pad drawing says.

There is no vertical mount row for this case, so the 82.0 pF part at 2500 V is always laid flat, and the choice is only normal or high density: A 7.11, B 1.27, C 5.08 and D 7.62 mm against A 6.60, B 0.76, C 5.08 and D 6.60 mm. The 1.02 mm overlap is the space the solder fillet has to form in on both ends, and it does not shrink with the tighter row.

Electrical limits at 2500 VDC

The electrical identity of 800C820JTN2500X is a zero plus or minus 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, no derating of working voltage across that range, a quality factor above 2000 at 1 MHz with 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits, and 2500 VDC working with a withstanding test at 3750 V for five seconds, which is 150 percent of the rating.

The qualification block is MIL-STD-202 in three places, method 107 condition A for thermal shock, method 106 for moisture resistance, and method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours with 1.5 VDC applied. For the 82.0 pF part at 2500 V the tests do not change with the value, only the working voltage does, and the sheet names no EIA-198, MIL-PRF-55681 or QPL listing for the series.

What 82.0 pF does from 30 MHz to 1 GHz

At 30 MHz the 82.0 pF body at 2500 V presents 64.7 ohm, at 150 MHz 12.9 ohm, at 500 MHz 3.88 ohm and at 1 GHz 1.94 ohm, and on a 50 ohm line the value reaches 50 ohm at about 38.8 MHz, inside the band. Those four numbers are what a coupling, bypass or tuning position is built around, and they are why the capacitance code is quoted with the voltage field: the same body behaves as a different element once the reactance leaves the window the stage can tune. The J window of 77.9 to 86.1 pF reads 12.3 ohm at the top and 13.6 ohm at the bottom against 12.9 ohm nominal at 150 MHz, so the band spreads the reactance by 1.30 ohm, 10.0 percent of the nominal on a 2500 V part.

The loss statement for the 82.0 pF part at 2500 V is a quality factor above 2000 at 1 MHz plus 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits, and the thermal note behind the current curve is a 65 C mounting surface with 15 C per watt, 4 W giving a 125 C case. That is why a value this large is bought with its mounting and its copper area in mind, not only with its printed capacitance.

A 82.0 pF part at 2500 V held to zero plus or minus 30 ppm per degree C drifts about 0.4428 pF from minus 55 to plus 125 degrees C, which is 0.070 ohm against the 12.9 ohm nominal at 150 MHz. On a high power stage that figure is small next to the tolerance window, and the two are read together when a tuned position is signed off.

Sourcing the 82.0 pF value and the second source

Because 800C820JTN2500X ends at the marking field, packing is quoted with the order: T for tape and reel at 500 pieces, T250 or T at 250, J36 or J180 on a tray of 36 or 180, J24 or J60 on a tray of 24 or 60, or B24 in a box of 24. On a 82.0 pF order at 2500 V that count sets how many boards one package covers. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

At 2500 V and 82.0 pF the buying question is not only price: the package size, the date code and the storage grade set what the line can run. A replacement is checked on the four fields the order code exposes, capacitance, tolerance, voltage and case, and only then on the certificate.

For the 82.0 pF value at 2500 V the sourcing conversation is short if the drawing is in hand: capacitance code, tolerance letter, voltage field and case, then the packing quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.